• Nie Znaleziono Wyników

DARE-TU Project

N/A
N/A
Protected

Academic year: 2021

Share "DARE-TU Project"

Copied!
3
0
0

Pełen tekst

(1)

Delft University of Technology

DARE-TU Project

Co-creation of Affordable and Clean Pumped Irrigation for Smallholders

Intriago Zambrano, Juan Carlo; Michavila, Jaime; Arenas, Eva; Diehl, Jan-Carel; Ertsen, Maurits

Publication date 2019

Document Version

Accepted author manuscript Citation (APA)

Intriago Zambrano, J. C., Michavila, J., Arenas, E., Diehl, J-C., & Ertsen, M. (2019). DARE-TU Project: Co-creation of Affordable and Clean Pumped Irrigation for Smallholders. 315-316. Abstract from 11th Eastern European Young Water Professionals Conference IWA YWP, Prague, Czech Republic.

Important note

To cite this publication, please use the final published version (if applicable). Please check the document version above.

Copyright

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons. Takedown policy

Please contact us and provide details if you believe this document breaches copyrights. We will remove access to the work immediately and investigate your claim.

This work is downloaded from Delft University of Technology.

(2)

Other

11th Eastern European Young Water Professionals Conference IWA YWP, 1-5 October 2019, Prague, Czech Republic

315

DARE-TU Project: Co-creation of Affordable and Clean

Pumped Irrigation for Smallholders

J. C. Intriago Zambrano*, J. Michavila**, E. Arenas***, J.-C. Diehl**** and M. W. Ertsen*

* Department of Water Management, Faculty of Civil Engineering and Geosciences, Delft University of Technology. Building 23, room 4.79, Stevinweg 1, 2628 CN Delft, Netherlands

(Email: J.C.IntriagoZambrano@tudelft.nl)

** aQysta BV, Molengraaffsingel 12, 2629 JD Delft, Netherlands

*** ICAI School of Engineering, Comillas Pontifical University, Calle de Alberto Aguilera 25, 28015 Madrid, Spain

**** Department of Design Engineering, Faculty of Industrial Design Engineering, Delft University of Technology, Landbergstraat 15, 2628 CE Delft, Netherlands

INTRODUCTION

Given the substantial amount of smallholder farms worldwide (Lowder et al., 2016), intensification of their crop production is crucial for increasing local and global food security (Tscharntke et al., 2012). Although irrigation water is not the only influencing factor in agriculture, improving (or enabling) its access and control is a major option to secure smallholder production as well as improving their livelihoods (Burney and Naylor, 2012). A way to achieve this goal is to provide intensified irrigation by using pumping technologies to water farmlands that will remain otherwise unirrigated. However, many current irrigation systems operate on electricity- or diesel-based pumping technologies. On one hand, this means high operation and maintenance costs due to the continuous use of electricity and expensive fossil fuels, respectively (Aliyu et al., 2018; Chandel et al., 2015), thereby becoming (too) cost-intensive for smallholder farming. On the other hand, these systems are strongly linked to air pollution due to their gaseous emissions and noise, hence affecting the local environmental quality as well.

A more environmentally sound and at times less expensive alternative for smallholders would be pumped irrigation systems that operate on renewable energies, i.e. solar power, wind power, biomass/biogas, hydropower (Gopal et al., 2013). From these, hydro-powered pumping (HPP) technologies, namely those hydro-mechanically driven by the water they lift, pose further advantages over their other RE-based counterparts. (i) Their energy source is, in general, locally available 24/7, relatively concentrated and more predictable; (ii) they have a higher power-to-size ratio, thus are more cost-effective; (iii) they are mechanically less complex and more robust, hence less maintenance-demanding and long-lasting; and, (iv) they are typically more efficient (up to 85 %) (Fraenkel, 1986). Despite these obvious advantages, most HPP technologies have not been used steadily over time, and are largely ignored nowadays. Moreover, their pitfalls lie beyond their mere technical performance: failures and misuse, thus eventual phasing out of HPP technologies, have found their roots in lack of proper management systems and business models (Intriago Zambrano et al., 2019).

RESEARCH APPROACH

In this context, the DARE-TU project aims to study a more robust, empowered, and sustained integration between the Integrated Turbine Pump (ITP) – an innovative HPP device that operates simultaneously as pump and turbine – and smallholder irrigation schemes, by means of an iteratively co-created Sustainable Product Service-System (SPSS). The latter, built by the

(3)

bottom-Other

11th Eastern European Young Water Professionals Conference IWA YWP, 1-5 October 2019, Prague, Czech Republic

316

up inputs of stakeholders (e.g. smallholders, businesses/organizations), does not focus in merely selling potentially unaffordable pumps but in providing ITP-based irrigation services to the community. In this way, the SPSS is able to cope with financial restrictions, management issues and environmental concerns, while at the same time creating social value for the smallholders and profit for the businesses (Boukhris et al., 2017). Furthermore, this process is conducted under the light of the innovative Context Variation by Design (CVD) approach, through which proposed SPSS designs are intentionally and systematically exposed to different contexts in early stages, so richer and more-satisfying solutions can be achieved (Kersten et al., 2017). In particular, this paper will focus on the co-creation process of the ITP-based SPSS in two different smallholder irrigation schemes (i.e. contexts), located in Nepal and Indonesia, respectively.

Figure 1. Co-creation of ITP-based SPSS. An early SPSS model, comprising both product (ITP, infrastructure) and

service (irrigation water, others) is exposed to two different contexts; the reaction of (non)human agents (i.e.

smallholders, other stakeholders, landscapes) in each of them, serves as feedback to co-create a second iteration of the SPSS that will be then re-exposed, thus repeating the cycle

REFERENCES

Aliyu, M., Hassan, G., Said, S.A., Siddiqui, M.U., Alawami, A.T., Elamin, I.M. (2018). A review of solar-powered water pumping systems. Renewable and Sustainable Energy Reviews, 87, 61-76.

Boukhris, A., Fritzsche, A., Möslein, K. (2017). Co-creation in the Early Stage of Product-service System Development. Procedia CIRP, 63, 27-32.

Burney, J.A., Naylor, R.L. (2012). Smallholder Irrigation as a Poverty Alleviation Tool in Sub-Saharan Africa. World

Development, 40, 110-123.

Chandel, S., Nagaraju Naik, M., Chandel, R. (2015). Review of solar photovoltaic water pumping system technology for irrigation and community drinking water supplies. Renewable and Sustainable Energy Reviews, 49, 1084-1099. Fraenkel, P. (1986). Water Pumping Devices: A Handbook for Users and Choosers. Intermediate Technology

Publications, London, UK.

Gopal, C., Mohanraj, M., Chandramohan, P., Chandrasekar, P. (2013). Renewable energy source water pumping systems—A literature review. Renewable and Sustainable Energy Reviews, 25, 351-370.

Intriago, J.C., Michavila, J., Arenas, E., Diehl, J.C., Ertsen, M.W. (2019). Water lifting water: A comprehensive spatio-temporal review on the hydro-powered water pumping technologies. Water, 11, 1677.

Kersten, W.C., Diehl, J.C., Crul, M.R.M. (2017). Influence of Context Variation on Quality of Solutions: Experiences with Gasifier Stoves. Procedia Manufacturing, 8, 487-494.

Lowder, S.K., Skoet, J., Raney, T. (2016). The Number, Size, and Distribution of Farms, Smallholder Farms, and Family Farms Worldwide. World Development, 87, 16-29.

Tscharntke, T., Clough, Y., Wanger, T.C., Jackson, L., Motzke, I., Perfecto, I., Vandermeer, J., Whitbread, A. (2012). Global food security, biodiversity conservation and the future of agricultural intensification. Biological

Cytaty

Powiązane dokumenty

what kind of propositions seem about reality and what actually is described by the truth of the judgements under the influences of beliefs. In this situation, we have to depart

This knowledge included models and methods to predict different bearing properties like load capacity, stiffness and friction as a function of design parameters

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright

The increasing number of engineers working in the field of mechatronics increases the number of people that have the right skillset to design magnetic fluid bearings. The

While the lexical entry for adjectival L-passives as in (41) coupled with the theory of participle fseq zone whereby L spells out bigger constituents than T and N already at this

Delft university of Technology Faculty of Architecture Chair of Product Development.. Berlageweg 1 2628 CR Delft Mick Eekhout ng

de Winter is with the Department of Biomechanical Engineering, Faculty of Mechanical, Maritime and Materials Engineering, Delft University of Technology, 2628 CD Delft, The

* an oscillating pulse to the liquids in the extraction column (such as packed and Sieve-plate column) can appreciably increase the extraction efficiency (due to the