Cable Ladder
DK...
H
A - A 12
a
B - B
APPLICATIONS Cable routing
Height mm
H
CODE
60 NO60N
Catalogue No.
460001 100 Qty
NO60N
NO60N
100 42 cm2 200 84 cm2 300 126 cm2 400 168 cm2 500 210 cm2 600 252 cm2
DKD...H60N
Width
a
mm Length
mm
L
Catalogue CODE No.
1 m kg
100 100 DKD100H60/3N
DKD100H60/6N
3000 6000
2.01 2.01
465110 465210 200
200 DKD200H60/3N
DKD200H60/6N
3000 6000
2.24 2.24
465120 465220 300
300 DKD300H60/3N
DKD300H60/6N
3000 6000
2.47 2.47
465130 465230 400
400 DKD400H60/3N
DKD400H60/6N
3000 6000
2.81 2.81 465240
465140
500 500 DKD500H60/3N
DKD500H60/6N
3000 6000
2.92 2.92
465150 465250 600
600 DKD600H60/3N
DKD600H60/6N
3000 6000
3.15 3.15
465160 465260
300 300 400 400
600 600 DKP300H60/3N
DKP300H60/6N DKP400H60/3N DKP400H60/6N
DKP600H60/3N DKP600H60/6N
3000 6000 3000 6000
3000 6000
2.97 2.97 3.38 3.38
3.79 3.79
465430 465530 465440 465540
465460 465560 200
200 DKP200H60/3N
DKP200H60/6N
3000 6000
2.69 2.69
465420 465520 100
100 DKP100H60/3N
DKP100H60/6N
3000 6000
2.42 2.42
465410 465510
500 500 DKP500H60/3N
DKP500H60/6N
3000 6000
3.51 3.51
465450 465550
DKP...H60N
Width
a
mm Length
mm
L
Catalogue CODE No.
1 m kg
DKC...H60N
100 100
3000 6000
3.22 3.22
465710 465810 DKC100H60/3N
DKC100H60/6N
200 200
3000 6000
3.57 3.57
465720 465820 DKC200H60/3N
DKC200H60/6N
300 300 DKC300H60/3N
DKC300H60/6N
3000 6000
3.96 3.96
465730 465830 400
400 DKC400H60/3N
DKC400H60/6N
3000 6000
4.50 4.50
465740 465840 500
500 DKC500H60/3N
DKC500H60/6N
3000 6000
4.68 4.68
465750 465850 600
600 DKC600H60/3N
DKC600H60/6N
3000 6000
5.05 5.05
465760 465860 Width
mm
a
Length mm
L
Catalogue CODE No.
1 m kg
≠ 1.2 mm
≠ 1.5 mm
≠ 2.0 mm
Thickn. (ga) ≠ [mm]: 0.7 1.0 1.2
1.5 2.020
VI VI
A 300 150
L A
B B
Qty/m
Qty/m Qty/m 2/6 2/6 2/6 2/6 4/12 2/12 4/12 2/12 2/12 2/12 2/12 2/12
2/6 2/6 2/12 2/12 2/6 2/12 2/6 2/12 4/12 2/12 4/12 2/12
2/6 2/12 2/6 2/12 2/6 2/12 2/6 2/12 4/12 2/12 4/12 2/12
9
35
Tray Deflection f in [mm] at Q max.
10 40 30 50
20
0.0 60
1.5 2.0 2.5 3.0 3.5
1.0 2.0
0.5 0.0 1.5
Safe Working Load Q in [ kN/m] max.
3.0 2.5
1.5 2.0 1.2
Thickn. (ga) [mm]:
4.0 4.5 5.0
f Qmax
Protective Cap (Set)
MATERIAL
Polyethylene. Standard colour: green to RAL 6029 Available finishes:
white to RAL 9010. silver to RAL 9006 APPLICATIONS
Protecting installers against cut from steel edges;
improving overall product appearance.
NOTE
Cable ladder with rungs adapted to Cable Clamps UKZ/UKZO Available upon special order:
- cable ladders 2m long - cable ladders 150. 250mm wide
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2011 (SG) Available finishes:
F- steel, hot-dip galv.
to PN-EN ISO 1461:2011 (HDG)
E- stainless steel (SS), grade 1.4301 (AISI304), sections to 3m long
L- powder coating in a full range of colours (PC) (info p. 4)
WIDTH USABLE
CROSS-SECTION
NOTE
In case of horizontal assembly ladders with rungs on the wall, it is recommended to use ladders with double riveting of the rungs to the side. Installation of the ladder additionally strengthened with flat bars - page 50.
Height mm
H
CODE
60 NO60N
Catalogue No.
460001 100 Qty APPLICATIONS
Cable routing
NO60N
NO60N
DU...
B - B
32
18
16 12
H
a A - A
Cable Ladder
100 42 cm2 200 84 cm2 300 126 cm2 400 168 cm2 500 210 cm2 600 252 cm2
600 600 DUP600H60/3N
DUP600H60/6N
3000 6000
466360 466460 3.79 3.79 500
500 DUP500H60/3N
DUP500H60/6N
3000 6000
466350 466450 3.51 3.51 400
400 DUP/DUOP400H60/3 DUP/DUOP400H60/6
3000 6000
466340 466440 3.38 3.38 300
300 DUP/DUOP300H60/3 DUP/DUOP300H60/6
3000 6000
466330 466430 2.97 2.97 200
200 3000 6000
466320 466420 DUP/DUOP200H60/3
DUP/DUOP200H60/6
2.69 2.69
DUP/DUOP...H60
Width
a
mm Length
mm
L
Catalogue CODE No.
1 m kg
100 100
3000 6000
466310 466410 DUP/DUOP100H60/3
DUP/DUOP100H60/6
2.42 2.42 200
200 3000 6000
466020 466120 DUD200H60/3N
DUD200H60/6N
2.24 2.24 300
300 DUD300H60/3N DUD300H60/6N
3000 6000
466030 466130 2.47 2.47 400
400 DUD400H60/3N DUD400H60/6N
3000 6000
466040 466140 2.81 2.81 500
500 DUD500H60/3N DUD500H60/6N
3000 6000
466050 466150 2.92 2.92 600
600 DUD600H60/3N DUD600H60/6N
3000 6000
466060 466160 3.15 3.15 100
100 3000 6000
466010 466110 DUD100H60/3N
DUD100H60/6N
2.01 2.01
DUD...H60N
Width
a
mm Length
mm
L
Catalogue CODE No.
1 m kg
Width
a
mm Length
mm
L
Catalogue CODE No.
1 m kg
DUC600H60/3N DUC600H60/6N DUC500H60/3N DUC500H60/6N DUC400H60/3N DUC400H60/6N DUC300H60/3N DUC300H60/6N DUC200H60/3N DUC200H60/6N DUC100H60/3N DUC100H60/6N
DUC...H60N
600 600
3000 6000
466660 466760 5.05 5.05 500
500 3000 6000
466650 466750 4.67 4.67 400
400 3000 6000
466640 466740 4.50 4.50 300
300 3000 6000
466630 466730 3.96 3.96 200
200 3000 6000
466620 466720 3.58 3.58 100
100 3000 6000
466610 466710 3.22 3.22
2.0 mm Width
a
mm Length
mm
L
Catalogue CODE No.
1 m kg
≠ 1.2 mm
≠ 1.5 mm
≠ 2.0 mm
A 300 150
L A
B B
Qty/m
Qty/m Qty/m 2/6 2/6 2/6 2/6 4/12 2/12 4/12 2/12 2/12 2/12 2/12 2/12
2/6 2/6 2/12 2/12 2/6 2/12 2/6 2/12 4/12 2/12 4/12 2/12
2/6 2/12 2/6 2/12 2/6 2/12 2/6 2/12 4/12 2/12 4/12 2/12
E-90
Tray Deflection f in [mm] at Q max.
10 40 30 50
20
0.0 60
1.5 2.0 2.5 3.0 3.5
1.0 2.0
0.5 0.0 1.5
Safe Working Load Q in [ kN/m] max.
3.0 2.5
1.5 2.0 1.2
Thickn. (ga) [mm]:
4.0 4.5 5.0
f Qmax
VI E-90
Protective Cap (Set)
MATERIAL
Polyethylene. Standard colour: green to RAL 6029 Available finishes:
white to RAL 9010. silver to RAL 9006 APPLICATIONS
Protecting installers against cut from steel edges;
improving overall product appearance.
NOTE
Cable ladder with rungs adapted to fixing Cable Clamps UK/UKO
Available upon special order:
- cable ladders 2m long - cable ladders 150. 250mm wide - production capability of perforated rungs
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2011 (SG) Available finishes:
F- steel, hot-dip galv.
to PN-EN ISO 1461:2011 (HDG)
E- stainless steel (SS), grade 1.4301 (AISI304), sections to 3m long
L- powder coating in a full range of colours (PC) (info p. 4)
WIDTH USABLE
CROSS-SECTION
NOTE
In case of horizontal assembly ladders with rungs on the wall, it is recommended to use ladders with double riveting of the rungs to the side. Installation of the ladder additionally strengthened with flat bars - page 50.
LDC/LDOCH60
LDC/LDOCH60
LGC/LGOCH60
H
175
9x15
LG...
Articulated Connector Straight Connector
LDC/LDOCH60 65 0.31 461001 10 CODE
Height mm
H
Catalogue 1 pc No.
kg
Qty
LGC/LGOCH60N 65 0.20 461301 10 CODE
Height mm
H
Catalogue 1 pc No.
kg
Qty
≠ 2.0 mm
≠ 2.0 mm
H
230 115
9x15
LDD...
LKDC/LKDOCH60
LKDC/LKDOCH60
H
540
9x15
Angle Connector
LKDC/LKDOCH60 65 0.58 461101 20 CODE
Height mm
H
Catalogue No.
1 pc kg
Qty
≠ 2.0 mm 7x12
9x18
a
115
LGTH60N
LGTH60N 65 0.30 461302 10
CODE
Height mm
H
Catalogue No.
1 pc kg
Qty
≠ 3.0 mm
≠ 2.0 mm
LDDCH60N
LDDCH60N 65 0.29 461201 10
CODE
Width mm
a
Catalogue No.
1 pc kg
Qty
LDDTH60N
LDDTH60N 65 0.43 461202 10
CODE
Width mm
a
Catalogue No.
1 pc kg
Qty
≠ 3.0 mm
22
VI VI Thickn. (ga) ≠ [mm]: 1.0 1.2 1.5 2.0 3.0
E-90
E-90
E-90
- detailed info in section XIX
E-90
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2011 (SG) Available finishes:
F- steel, hot-dip galv.
to PN-EN ISO 1461:2011 (HDG)
E- stainless steel (SS), grade 1.4301 (AISI304), L- powder coating in a full range of colours (PC) (info p. 4)
Articulated Connector - Attachable
APPLICATIONS Joining cable ladder lengths
For the assembly use 4 sets of Screw SGKM8x14 or SGM8x14
APPLICATIONS
Joining cable ladder components with an option of diversion in the vertical plane
For the assembly use 4 sets of Screw SGKM8x14 or SGM8x14
NOTE
New dense perforation applied in Angle Connector – LKDCH50N guarantees bolted connection of two, cable ladder lengths crossed at any area either at an angle, or as a straight connection - no additional hole-drilling necessary
APPLICATIONS
Joining cable ladder lengths routed at various angles
For the assembly use 2 sets of Screw SGKM8x14 to the bottom of ladder side and 2 sets to the ladder side
APPLICATIONS
Joining cable ladder lengths routed at various angles.
Full-range angle adjustment with a lock.
Application Example of LGC/LGOCH60 and LDDCH60N Application Example of LDC/LDOCH60
and LKDC/LKDOCH60
VI LPLS60
Catalogue CODE No.
1 pc.
kg Qty
LPLS60 0.49 405806 2
≠ 2.0 mm
Vertical Connector - Light
LPLS60 N
SGKM8x16 LPLS60
SGKM8x16 LPLS60
Corner C onnector
Ad-on Connector
LKUC2
LDDK...2
LDDKP2
LDDKP2 1.26 405100 2
CODE Catalogue
No.
1 pc
kg Qty
≠ 2.0 mm
LDDKC2
LDDKC2 1.67 405300 2
CODE Catalogue
No.
1 pc
kg Qty
≠ 3.0 mm H3
LKUC2
LKUC2 138 1.37 405600 10
CODE
Height mm
Catalogue 1 pc No.
kg Qty
≠ 2.0 mm
H1
62 Height
mm H2
102 Height mm
R 420
7x14 9x23
120 H1 H2 H3
7x14 9x23
280 100 50
169
19
9x25
8x15
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2011 (SG) Available finishes:
F- steel, hot-dip galv.
to PN-EN ISO 1461:2011 (HDG)
E- stainless steel (SS), grade 1.4301 (AISI304), L- powder coating in a full range of colours (PC) (info p. 4)
5. Connector - correctly installed Corner Connector LKUC2 will fits cable ladders H60 and H100
Assembly Example of Add-one Connector LDDKP2 in Combination with Cable Ladder Lengths Joined through Corner Connector LKUC2
Ad-on Connector LDDKP1 (LDDKC1) will fits cable ladders H60 and H100 1. Attaching a new cable ladder
length in any area of the existing cable run
2. Placing connectors from the top
1. Placing connectors from the top 2. Pulling the connector's locks down
4 sets of Screws SGKM6x12 or SGM6x12 4. Strengthening the locks
of the connector by screwing them up
2 sets of Screws SGKM8x14 or SGM8x14
Application example for LPLS60 Assembly Example of Corner Connector LKUC2 in Combination with Cable Ladder
APPLICATIONS
Branching out any area of already existing cable runs. Protection against cables slipping from the run while their pulling or using.
Fast and easy joining of a new cable run section to any area of the existing one.
APPLICATIONS
For the assembly use 2 sets of Screws SGKM8x14 or SGM8x14 and 4 sets of Screws SGKM6x12 or SGM6x12 Firm, quick attachment to any area of cable
ladder length - no hole-drilling necessary.
For the assembly use 4 sets of Screws SGKM6x12 or SGM6x12 Connection of a vertical drop-out at any point
of a horizontal cable route.
APPLICATIONS
NOTE!
LPLS60 is designed for light-weight ladders with height of 45 - 60 mm.
LD...
90° Horizontal Bend LDP/LDOP...H60
100 Width mm
a
Catalogue No.
1 pc kg
200 300 400 500 LDP/LDOP100H60
CODE
LDP/LDOP200H60 LDP/LDOP300H60 LDP/LDOP400H60 LDP/LDOP500H60
LDP/LDOP600H60 600
CZDP/CZDOP..H60
100 2
Width
a=b
mmCatalogue No.
1 pc kg
200 300 400 500 CZDP/CZDOP100H60
CODE
CZDP/CZDOP200H60 CZDP/CZDOP300H60 CZDP/CZDOP400H60 CZDP/CZDOP500H60
CZDP/CZDOP600H60 600
≠ 1.5 mm 3.91 4.47 5.03 5.58
466830 466840 466850 466860 3.35 466820 2.79 466810
7.75 8.61 9.47 10.33 6.90 6.19
TDP/TDOP...H60
100 2
Width
a=b
mmCatalogue No.
1 pc kg
200 300 400 500 TDP/TDOP100H60
CODE
TDP/TDOP200H60 TDP/TDOP300H60 TDP/TDOP400H60 TDP/TDOP500H60
TDP/TDOP600H60 600
≠ 1.5 mm
6.02 6.75 7.48 8.22
467230 467240 467250 467260 5.29 467220 4.56 467210
2 2 2 2 2
2 2 2 2 2 467430 467440 467450 467460 467420 467410 420
a 150
LDZP...H60N
300 400 500 600 200 100
467030 467040 467050 467060 467020 467010 Width
a
mm
Catalogue No.
1 pc
kg Qty
2 2 2 2 2 2
TDC...H60N
200 300 400 500 600 100
7.05 8.03 9.00 9.97 10.96
6.08 467320 467330 467340 467350 467360 467310
2 2 2 2 2 2 APPLICATIONS
Diversion in cable routing.
APPLICATIONS Branching out cable runs.
≠ 1.5 mm
≠ 2.0 mm
≠ 1.5 mm
≠ 2.0 mm
≠ 2.0 mm
LDZ...
Horizontal Tee
Horizontal Cross-over
LDC...H60N
200 300 400 500 600 100 LDC200H60N
LDC300H60N LDC400H60N LDC500H60N LDC600H60N LDC100H60N
4.47 5.21 5.95 6.70 7.45 3.72
466920 466930 466940 466950 466960 466910
2 2 2 2 2 2
2 2 2 2 2 2 Width
a
mm
Catalogue CODE No.
1 pc
kg Qty
LDZC...H60N
200 300 400 500 600 100
6.06 7.89 8.55 9.89 11.50
4.28 467120 467130 467140 467150 467160 467110
2 2 2 2 2 2 Width
a
mm
Catalogue No.
LDZP300H60N LDZP400H60N LDZP500H60N LDZP600H60N LDZP200H60N LDZP100H60N
CODE
LDZC200H60N LDZC300H60N LDZC400H60N LDZC500H60N LDZC600H60N LDZC100H60N
CODE
1 pc
kg Qty
Width
a=b
mmCatalogue No.
TDC200H60N TDC300H60N TDC400H60N TDC500H60N TDC600H60N TDC100H60N
CODE
1 pc
kg Qty
CZDC...H60N
200 300 400 500 600 100 CZDC200H60N
CZDC300H60N CZDC400H60N CZDC500H60N CZDC600H60N CZDC100H60N
9.20 9.93 11.48 12.62 13.77 8.25
467520 467530 467540 467550 467560 467510
2 2 2 2 2 2 Width
a=b
mmCatalogue CODE No.
1 pc
kg Qty
≠ 2.0 mm 5.92 6.41 7.42 8.63 4.55 3.70
Thickn. (ga) ≠ [mm]: 0.7 1.0 1.2
1.5 2.024
VI VI
CZD...
b 150 420 b
a a
TD...
150b
420
a a
Qty
Qty Qty a
a
R420 150
80
570 R500+a
E-90
E-90
E-90
- detailed info in section XIX
E-90
90° Horizontal Bend - External
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2011 (SG) Available finishes:
F- steel, hot-dip galv.
to PN-EN ISO 1461:2011 (HDG)
E- stainless steel (SS), grade 1.4301 (AISI304), L- powder coating in a full range of colours (PC) (info p. 4)
For the assembly use 4
and 16 sets of Screw SGKM8x14 or SGM8x14
Straight Connectors LDC/LDOCH60
For the assembly use 4
and 16 sets of Screw SGKM8x14 or SGM8x14
Straight Connectors LDC/LDOCH60
For the assembly use 6 Straight Connectors LDC/LDOCH60 and 24 sets of Screw SGKM8x14 or SGM8x14
In case of special orders specify dimensions a, b
For the assembly use 8 Straight
and 32 sets of Screw SGKM8x14 or SGM8x14 In case of special orders specify dimensions a, b
Connectors LDC/LDOCH60
RDSP...H60N
RDL...
Left Reducer
APPLICATIONS
Reducing/extending widths of cable runs
RDP...
Right Reducer
RDLP...H60N
RDLP200/100H60N 100 2
CODE
Width mm
b
Catalogue No.
1 pc kg
RDLP300/200H60N 200 RDLP400/300H60N 300 RDLP500/400H60N 400 RDLP600/500H60N 500
RDPP200/100H60N 100 2
CODE
Width mm
b
Catalogue No.
1 pc kg
RDPP300/200H60N 200 RDPP400/300H60N 300 RDPP500/400H60N 400 RDPP600/500H60N 500
≠ 1.5 mm
≠ 1.5 mm
RDS...
Straight Reducer
RDSP200/100H60N 100 2
CODE
Width mm
b
Catalogue No.
1 pc kg
RDSP300/200H60N 200 RDSP400/300H60N 300 RDSP500/400H60N 400 RDSP600/500H60N 500
≠ 1.5 mm 1.91 2.09 2.25
468040 468050 468060 1.73 468230 1.56 468220
468240 468250 468260 468630 468620
2 2 2 2
2 2 2 2
2 2 2 2 467840 467850 467860 467830 467820 200
Width mm
a
300 400 500 600
200 Width mm
a
300 400 500 600
200 Width mm
a
300 400 500 600
1.91 2.09 2.25 1.73 1.56
1.91 2.09 2.25 1.73 1.56
RDPC...H60N
468820
468340 468350 468360 468830 RDPC200/100H60N
RDPC400/300H60N RDPC500/400H60N RDPC600/500H60N RDPC300/200H60N
2.08
2.55 2.78 3.01 2.30
2 2 2 2 2
400 500 600 300 200
300 400 500 200 100
CODE Catalogue
1 pc No.
kg Qty
RDLC...H60N
RDLC200/100H60N RDLC300/200H60N RDLC400/300H60N RDLC500/400H60N RDLC600/500H60N
468420 468430 468140 468150 468160 2.08 2.30 2.55 2.78 3.01
2 2 2 2 2
300 400 500 200 100
CODE Catalogue
No.
1 pc
kg Qty
400 500 600 300 200
RDSC...H60N
RDSC400/300H60N RDSC500/400H60N RDSC600/500H60N RDSC300/200H60N RDSC200/100H60N
2.55 2.78 3.01 2.30 2.08
467940 467950 467960 468030 468020
2 2 2 2 2
400 500 600 300 200
300 400 500 200 100
CODE Catalogue
1 pc No.
kg Qty
≠ 2.0 mm
≠ 2.0 mm
≠ 2.0 mm
RDPP...H60N
DUP/DUOP400H60
DUP/DUOP300H60 RDLP400/300H60N
LDC/LDOCH60 SGKM8x14
DUP/DUOP400H60
DUP/DUOP300H60 RDPP400/300H60N
LDC/LDOCH60 SGKM8x14
DUP/DUOP400H60
DUP/DUOP300H60 RDSP400/300H60N
LDC/LDOCH60 SGKM8x14 Width
mm
b
Width mm
a
Width mm
b
Width mm
a
Qty
Qty
Qty Width
mm
b
Width mm
a
600
b a
150
a
600
b
150
E-90 E-90 E-90
b a
150 600
VI
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2011 (SG) Available finishes:
F- steel, hot-dip galv.
to PN-EN ISO 1461:2011 (HDG)
E- stainless steel (SS), grade 1.4301 (AISI304), L- powder coating in a full range of colours (PC) (info p. 4)
For the assembly use 4 Straight Connectors LDC/LDOCH60 and 16 sets of Screw SGKM8x14
In case of special orders specify dimensions a, b
For the assembly use 4 Straight Connectors LDC/LDOCH60 and 16 sets of Screw SGKM8x14
In case of special orders specify dimensions a, b
For the assembly use 4 Straight Connectors LDC/LDOCH60 and 16 sets of Screw SGKM8x14
In case of special orders specify dimensions a, b
Application Example of Reducer RDLP Application Example of Reducer RDPP Application Example of Reducer RDSP NOTE
The type of fitting rung corresponds to the type of cable ladder in the same order:
Cable Ladder DK - Rung Cross-Section
Cable Ladder DU - Rung Cross-Section
LPDWP/LPDWOP...H60
100 1
Width mm
a
Catalogue No.
1 pc kg
Qty
200 300 400 500 LPDWP/LPDWOP100H60
CODE
LPDWP/LPDWOP200H60 LPDWP/LPDWOP300H60 LPDWP/LPDWOP400H60 LPDWP/LPDWOP500H60 LPDWP/LPDWOP600H60 600
≠ 1.5 mm
2.26 469220 2.66 3.02 3.42 3.82
469230 469240 469250 469260 1.90 469210
1 1 1 1 1
LPDZP/LPDZOP...H60
100 1
Width mm
a
Catalogue No.
1 pc
kg Qty
200 300 400 500 CODE
LPDZP/LPDZOP100H60 LPDZP/LPDZOP200H60 LPDZP/LPDZOP300H60 LPDZP/LPDZOP400H60 LPDZP/LPDZOP500H60
LPDZP/LPDZOP600H60 600
≠ 1.5 mm
2.26 469020 2.66 3.02 3.42 3.82
469030 469040 469050 469060 1.90 469010
1 1 1 1 1
LPDW...
90° Vertical Bend - Internal
APPLICATIONS Diversion in cable routing.
LPD...
Adjustable Vertical Bend
a
450150150
LPDZ...
90° Vertical Bend - External
LPDP...H60N
LPDP100H60N 100 1
CODE
Width mm
a
Catalogue No.
1 pc
kg Qty
LPDP200H60N 200
LPDP300H60N 300
LPDP400H60N 400
LPDP500H60N 500
LPDP600H60N 600
≠ 1.5 mm
4.97 467620 5.36 5.93 6.11 6.51
467630 467640 467650 467660 4.60 467610
1 1 1 1 1
200 6.20 467720 300
400 6.74 7.50
467730 467740
LPDC...H60N
100 5.70 467710
500 600
7.75 8.27
467750 467760
2 2 2 2 2 2 Width
a
mm
Catalogue No.
LPDC200H60N LPDC300H60N LPDC400H60N LPDC100H60N
LPDC500H60N LPDC600H60N
CODE
1 pc kg
Qty
≠ 2.0 mm 200
300 400 500 600 100
2.76 3.16 3.52 3.92 4.32 2.40
1 1 1 1 1 1 469320 469330 469340 469350 469360 469310
LPDWC...H60N
Qty Width
a
mm
Catalogue No.
1 pc kg
LPDWC200H60N LPDWC300H60N LPDWC400H60N LPDWC500H60N LPDWC600H60N LPDWC100H60N
CODE
≠ 2.0 mm
≠ 2.0 mm
LPDZC...H60N
200 300 400 500 600 100
2.76 3.16 3.52 3.92 4.32 2.40
1 1 1 1 1 1 469120 469130 469140 469150 469160 469110
Qty Width
a
mm
Catalogue 1 pc No.
kg
LPDZC200H60N LPDZC300H60N LPDZC400H60N LPDZC500H60N LPDZC600H60N LPDZC100H60N
CODE
Thickn. (ga) ≠ [mm]: 0.7 1.0 1.2
1.5 2.026
VI VI
UT
SGM8x14
DUP/DUOP300H60
PSRM8x75
300H60 LPDWP/LPDWOP
LDC/LDOCH60
UK1/UKO1
WPT200
SGM8x14
PSRM10x90 LDC/LDOCH60
DUP/DUOP300H60
LPDZP/LPDZOP300H60
NOW40x40 UK1/UKO1
E-90
E-90
E-90
- detailed info in section XIX
E-90
500
R420
80
500
R420
80
a
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2011 (SG) Available finishes:
F- steel, hot-dip galv.
to PN-EN ISO 1461:2011 (HDG)
E- stainless steel (SS), grade 1.4301 (AISI304), L- powder coating in a full range of colours (PC) (info p. 4)
For the assembly use 4 Straight Connectors LDC/LDOCH60 and 16 sets of Screw SGKM8x14 or SGM8x14
For the assembly use 4 Straight Connectors LDC/LDOCH60 and 16 sets of Screw SGKM8x14 or SGM8x14
Application Example of 90 Bend - Internal LPDWP/LPDWOP or LPDWC.
° Vertical Application Example of 90 Bend - External
LPDZP/LPDZOP or LPDZC.
° Vertical For the assembly use 8 sets of Screw SGKM8x14
or SGM8x14