Contents/Spis treści

As a result of the comparison of the corrosion loops width of the investigate alloys as well of the inclination angle and amplitude of the curve loops it can be

Purpose: The paper addresses the problem of determining the dependence between initial heat treatment of an austenitic Fe–Ni alloy and its fatigue life at room

Purpose: In the following paper there have been the structure and properties of the MCMgAl12Zn1, MCMgAl9Zn1, MCMgAl6Zn1, MCMgAl3Zn1 magnesium cast alloy as-cast state and after a

W ith the increase of the pasting temperature, the apparent viscosity at 60°C, for a given shear rate was decreasing, probably due to the progressing

The high corrosion resistance of the treated S32615 steel is related to the formation of thinner top layer containing amorphous and complex compounds of silicon, oxide, carbon

The aim of these investigations was to define the influence of the degree of plastic deformation in the cold rolling process on the microstructure, mechanical

Riedlmajer, Influence the heat treatment of two base metal alloys used on dental prosthesis on corrosion resistance, Journal of Achievements in Materials and

These studies focused on the effect of: powder characteristics, form and amount of boron addition, and also sintering atmosphere, sintering temperature, sintering time on