System E-30, E-90 - CLICK Cable Trays – System H60
KF...50
60
7x10
L
7x32 Ø11
KF...50H60 KF...
Advantages of new system:
- Fast and easy assembly - Firm click connection
- Deep stamping around the slots in the bottom increase the strength - Dense perforation with stamping around the slots for excellent heat transfer – designed to enable cable tray installation on supports from BAKS anywhere within the system
Slotted holes Ø11 in the cable tray bottom allow for suspension on a threaded rod
SGKM6x12
N N
XIX
Qty/m mm
a
CODE
L
mm
Catalogue No.
1 m kg
300
KFJ300H60/3 3000
100
KFJ100H60/3 3000
150
KFJ150H60/3 3000
200
KFJ200H60/3 3000
162623 162723 162823 162923
4/12 4/12 4/12 2/6 2.96
1.63 1.98 2.28
Cable Tray
Qty/m
KFL...H60
Width mm
a
CODE
Length mm
L
Catalogue No.
1 m kg
≠ 0.7 mm
KFJ...H60
Width Length
≠ 1.0 mm 300
KFL300H60/2 2000
100
KFL100H60/2 2000
200
KFL200H60/2 2000
150
KFL150H60/2 2000
100
KFL100H60/3 3000
KFL150H60/3 150 3000 200
KFL200H60/3 3000
300
KFL300H60/3 3000
161123 161223 161323 161423 161523 161623 161723 161823
4/8 4/12
4/8 4/12
4/8 4/12
2/4 2.18 2/6
1.18 1.43 1.68 1.18 1.43 1.68 2.18
Snap fastening of Cable Trays KF…
APPLICATIONS Cable routing
MATERIAL Steel, strip-galv. acc. to
the Sendzimir method to PN-EN 10346:2011.
Connection of the Cable Trays KF… with the use of additional screws
For harsh environmental conditions, high moistness or structural vibrationsthe click connection must be reinforced with at least 1 screw set.
Applications of Cable Trays KF… with boltless connection - In electric installations assembled on grounded steel structures
- In electrical installations operated at 1 kV max.
- In hydraulic, pneumatic installations, etc.
Electrical continuity confirmed by the Institute of Power Engineering.
400
KFJ400H60/3 3000 3.65163023 2/6
System E-30, E-90 - CLICK Cable Trays – System H60
KKPFJ
a
a
R140 7x42
KKMPFJ
KKPFJ...
SGKM6x12
KFJ...
KKMPFJ...
SGKM6x12
KFJ...
16x25
a a
R1407x42
16x25
KKPFJ...H60
CODE
Width mm
a
Catalogue No.
1pc kg
≠ 1.0 mm
Qty
300 100 150 200 KKPFJ300H60
KKPFJ150H60 KKPFJ200H60 KKPFJ100H60
For the assembly use Screw Sets SGKM6x12 or SGM6x12.
160526 160226 160326 160426 1.07 1.66 0.60 0.82
10 10 10 10
KKMPFJ...H60
CODE
Width mm
a
Catalogue No.
1pc kg
≠ 1.0 mm
Qty
300 100 150 200 KKMPFJ300H60
KKMPFJ150H60 KKMPFJ200H60 KKMPFJ100H60
For the assembly use Screw Sets SGKM6x12 or SGM6x12.
0.91 161426 0.34 161026 0.46 161126 0.60 161226
10 10 10 10
N
E-90
N
E-90
APPLICATIONS Diversions in cable routing.
90° Horizontal Bend
45° Horizontal Bend
MATERIAL Steel, strip-galv. acc. to
the Sendzimir method to PN-EN 10346:2011.
Recommended manner of assembly of Cable Trays KF…
with the Horizontal Bend KKPFJ
Recommended manner of assembly of Cable Trays KF…
with the Horizontal Bend KKMPFJ
LPP/LPOPH60
Straight Connector
130
55
6.5x9
LPP/LPOPH60
LPP/LPOPH60 0.09 163111 100
CODE Catalogue
No.
1 pc kg
Qty
≠ 1.5 mm
For the assembly use min. 4 sets of Screw SGKM6x12
BL/BLO
Joint Protection Plate
BZK/BZKO
Edge Protection Plate
BL/BLO...
BL/BLO100 96 0.06 100110 100 CODE
Length mm
L
Catalogue 1 pc No.
kg Qty
BL/BLO150 146 0.09 100115 100 BL/BLO200 196 0.13 100120 100 BL/BLO300 296 0.19 100130 100 BL/BLO400 396 0.26 100140 30
BZK/BZKO...
BZK/BZKO100 96 0.04 100210 100 CODE
Length mm
L
Catalogue 1 pc No.
kg Qty
BZK/BZKO150 146 0.06 100215 100 BZK/BZKO200 196 0.08 100220 100 BZK/BZKO300 296 0.12 100230 100 BZK/BZKO400 396 0.16 100240 30
≠ 1.0 mm
≠ 1.0 mm
L L 7x14
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method PN-EN 10346:2011 Available finishes:
APPLICATION
Protecting cables against damage when pulling them. Additionally stiffened joint area in the cable tray.
For the assembly use:
- Width 100÷200 mm - min. 2 sets of Screw - Width 300÷400 mm - min. 3 sets of Screw
- Width 500÷600 mm - min. 5 sets of Screw SGKM6x12 Necessary to use for joining cable trays.
For the assembly use:
- Width 100÷200 mm - min. 4 sets of Screw - Width 300÷400 mm - min. 6 sets of Screw
- Width 500÷600 mm - min. 10 sets of Screw SGKM6x12
APPLICATION
Protecting cables against damage in the cable tray end.
System E-30, E-90 - CLICK Cable Trays – System H60
TKPFJ...H60
CODE
Width
a=b
mmCatalogue No.
1 pc.
kg
≠ 1.0 mm
Qty
300 100 150 200
20 20 20 20 TKPFJ300H60
TKPFJ150H60 TKPFJ200H60 TKPFJ100H60
162326 162026 162126 162226 1.65 2.47 0.98 1.30
TKPFJ
b
R140 7x42
a
a
16x25
Horizontal Tee
CZKPFJ
CZKPFJ...H60
CODE
Width
a=b
mmCatalogue 1 pc. No.
kg
≠ 1.0 mm
Qty
300 100 150 200
10 10 10 10 CZKPFJ300H60
CZKPFJ150H60 CZKPFJ200H60 CZKPFJ100H60
163126 162826 162926 163026 2.88 1.23 1.58 1.98
a a
b
R140
7x42 b
16x25
Horizontal Cross-over
CZKPFJ...
KFJ...
SGKM6x12
TKDFJ...H60
CODE
Width mm
a
Catalogue No.
1 pc.
kg
≠ 1.0 mm
Qty
TKDFJ
Add-on Tee
R140
7x42 a
150 200 300 100 TKDFJ100H60
TKDFJ150H60 TKDFJ200H60
TKDFJ300H60 0.72 163826
163526 163626 163726 0.44 0.51 0.58
10 10 10 10
TKPFJ
KFJ...
SGKM6x12
TKDFJ...
KFJ...
SGKM6x12 16x25
a
RKFJ...
Angle Reducer RKFJ...H60
CODE
Width mm
a
Catalogue No.
1 pc.
kg
≠ 1.0 mm
Qty 10 10 10 10 RKFJ50H60
RKF 100H60J RKF 150H60J RKF 200H60J
100 100 150 50
169413 169513 169613 0.10 0.14 0.18
169912 0.07 7x44 61
Left Reducer
RKLFJ...
RKLFJ...H60
CODE
Width mm
b
Catalogue No.
1 pc.
kg
≠ 1.0 mm
Qty
RKLFJ300/200H60 RKLFJ150/100H60 RKLFJ200/100H60 RKLFJ200/150H60
200 100 100 150
10 10 10 10 Width
mm
a
300 150 200 200
0.23 164712 0.28 164812 0.30 164912 0.37 165012 b
a
160
7x42
16x25
N N
N N
N N
N N N N
XIX
For the assembly use Screw S x12.
In case of special orders please specify dimensions of a and b.
ets SGKM6x12 or SGM6
For the assembly use Screw S x12.
In case of special orders please specify dimensions of a and b.
ets SGKM6x12 or SGM6
For the assembly use Screw Sets SGKM6x12 or SGM6x12.
Recommended manner of assembly of Cable Trays KF…
with the Horizontal Cross-over CZKPFJ
Recommended manner of assembly of Cable Trays KF… with the Horizontal Tee TKPFJ
Recommended manner of assembly of Cable Trays KF… with the Add-on Tee TKDFJ
APPLICATIONS
Cable routing Width reduction.
MATERIAL Steel, strip-galv. acc. to
the Sendzimir method to PN-EN 10346:2011.
System E-30, E-90 - CLICK Cable Trays – System H60
Right Reducer
RKPFJ... N
RKSFJ...
Straight Reducer
RKPFJ...H60
CODE
Width mm
b
Catalogue No.
1 pc.
kg
≠ 1.0 mm
Qty Width
mm
a
RKSFJ...H60
CODE
Width mm
b
Catalogue No.
1 pc.
kg
≠ 1.0 mm
Qty 10 10 10 10 RKSF 300/200H60J
RKSF 150/100H60J RKSF 200/100H60J RKSF 200/150H60J
Width mm
a
200 100 100 150 300 150 200 200
10 10 10 10 RKPF 300/200H60J
RKPF 150/100H60J RKPF 200/100H60J RKPF 200/150H60J
200 100 100 150 300 150 200 200
0.37 165512 0.23 165212 0.28 165312 0.30 165412
166012 0.37
165712 165812 165912 0.23 0.28 0.30 b
a
160
7x42
16x25
b
160
7x42
16x25
N
a
RKSFJ...
KFJ...
SGKM6x12
RKFJ...
KFJ...
KFJ...
SGKM6x12
LLFJ...
Adjustable Vertical Bend LLFJ...H60
CODE
Width mm
a
Catalogue No.
1 pc
kg Qty
LLFJ100H60 100
LLFJ150H60 150
LLFJ200H60 200
LLFJ300H60 300
≠ 1.0 mm
7x20
60
ELJ...H60
CODE
Width mm
a
Catalogue 1 pc No.
kg Qty
ELJ100H60 100
ELJ150H60 150
ELJ200H60 200
ELJ300H60 300
≠ 1.0 mm
Adjustable Vertical Bend Element
EL...
a
150
60
Ø7
2 2 2 2
4 4 4 4 166512 1.98
166212 166312 166412 1.32 1.50 1.60
167630 0.74
167610 167615 167620 0.41 0.50 0.58 7x20
7x10
46
N N
N N
APPLICATIONS
Cable routing Width reduction.
For the assembly use Screw S x12.
In case of special orders please specify dimensions of a and b.
ets SGKM6x12 or SGM6
For the assembly use Screw S x12.
In case of special orders please specify dimensions of a and b.
ets SGKM6x12 or SGM6
Used to create vertical bends of any internal radius through adding articulated connectors.
For installation use Screw Sets SGKM6x12 or SGM6x12. Adjustable Vertical Bend is delivered fully assembled together with: 2 Adjustable Vertical Bend Elements 4 parts of the 2-part Angle Connector item, 6 sets of screws
APPLICATIONS Diversions in cable routing.
Full-range angle adjustment with a lock.
MATERIAL Steel, strip-galv. acc. to
the Sendzimir method to PN-EN 10346:2011.
Recommended manner of assembly of Cable Trays KF… with the Vertical Straight Reducer RKSFJ
Recommended manner of assembly of Cable Trays KF…
with the Angle Reducer RKJ
System E-30, E-90 - CLICK Cable Trays – System H60
Cover
PK...
≠ 1.2 mm
PKL...
3000
PKL100/3 100 0.72 100610 10/30 Length
mm
L
CODE
Width mm
a
Catalogue No.
1 m kg
3000
PKL200/3 200 1.32 100620 6/18 3000
PKL300/3 300 1.92 100630 6/12
PKJ...
3000
PKJ100/3 100 1.04 100810 10/30 Length
mm
L
CODE
Width mm
a
Catalogue 1 m No.
kg
PKJ150/3 3000 150 1.44100815 6/18 PKJ200/3
PKJ300/3 PKJ400/3
3000 200 3000 300 3000 400
1.84 2.64 3.44
100820 6/18 100830 6/18 100640 6/18 PKL150/3 3000 150 1.02 100615 6/18
≠ 1.0 mm
≠ 0.7 mm
Qty/m
Qty/m
PKD...
3000
PKD100/3 100 101010 6/18
Length mm
L
CODE
Width mm
a
Catalogue No.
1 m kg
PKD150/3 3000 150 101015 6/18 3000
PKD200/3 PKD300/3 3000
3000 PKD400/3
200 300 400
1.30
2.30 3.30 4.30 1.80
101020 101030 100840
4/12 4/12 4/12 Qty/m
Cover for 90° Horizontal Bend
Cover for 45° Horizontal Bend
PKKMPJ PKKPJ
0.7÷1.5
a
R 5
a
1.0
a
1.0
a
1.5
Cover Clamp
ZPN
ZPN...
CODE
Height mm
H
Catalogue No.
12
H 100ZPNH60 16500029
MATERIAŁ
Taśma cynkowana galwanicznie (ZPN).
Taśma ze stali kwasoodpornej (ZPN E).
Taśma cynkowana metodą zanurzeniową PN-EN ISO 1461:2011 (ZPN F).
Qty
PKKPJ...
PKKPJ100 100 0.16 100213 20
CODE
Width mm
a
Catalogue No.
1 pc kg
PKKPJ200 PKKPJ300
200 300
0.45 0.90
100413 100513
20 10
PKKPJ150 150 0.28 100313 20
≠ 1.0 mm Qty
PKKMPJ...
PKKMPJ100 100 20
CODE
Width mm
a
Catalogue No.
1 pc kg
PKKMPJ200 PKKMPJ300
200 300
20 10
PKKMPJ150 150 20
≠ 1.0 mm Qty
0.65 102113 0.20 101913 0.32 102013 0.11 101813
PTKPJ...
PTKPJ100 100 20
CODE
Width mm
a
Catalogue No.
1 pc kg
PTKPJ200 PTKPJ300
200 300
20 10
PTKPJ150 150 20
≠ 1.0 mm Qty
1.00 103713 0.20 103413 0.35 103513 0.54
103613
PCZKPJ...
PCZKPJ100 100 20
CODE
Width mm
a
Catalogue No.
1 pc kg
PCZKPJ200 PCZKPJ300
200 300
20 10
PCZKPJ150 150 20
≠ 1.0 mm Qty
1.12 106913 0.25 106613 0.41 106713 0.60 106813
Cover for Horizontal Tee
Cover for Cross-over
Horizontal
a
1.0
PTKPJ
PCZKPJ
XIX
APPLICATIONS
Cable protection against damage.
Used in heavy dust indoor conditions
MATERIAL Steel, strip-galv. acc. to
the Sendzimir method to PN-EN 10346:2011.
System E-30, E-90 - CLICK Cable Trays – System H60
a
1.0
a
1.0
Cover for Left Reducer
Cover for Right Reducer
PRKLFJ...
CODE
Width mm
b
Catalogue No.
1 pc kg
Qty
≠ 1.0 mm
0.17 0.23
168412 168512 0.15 168312 0.13 168212
10 10 10 Width
mm
a
PRKPFJ...
CODE
Width mm
b
Catalogue No.
1 pc
kg Qty
≠ 1.0 mm
168912 169012 168812 168712 Width
mm
a PRKLFJ...
PRKPFJ...
PTKDJ...
CODE
Width mm
a
Catalogue 1 pc No.
kg
≠ 1.0 mm
Qty
PTKDJ...
PTKDJ100PTKDJ150 PTKDJ200 PTKDJ300
100 150 200 300
0.20 0.35 0.54 1.00
105013 105113 105213 105313
20 20 20 10
10 100
100 150 200 PRKLFJ150/100
PRKLFJ200/100 PRKLFJ200/150 PRKLFJ300/200
150 200 200 300
10 10 10 10 PRKPFJ150/100
PRKPFJ200/100 PRKPFJ200/150 PRKPFJ300/200
100 100 150 200
0.17 0.23 0.15 150 0.13
200 200 300
Cover for Straight Reducer
PRKSFJ...
PRKSFJ...
CODE
Width mm
b
Catalogue No.
1 pc
kg Qty
≠ 1.0 mm
0.17 0.23
169412 169812 0.15 169312 0.13 169212 Width
mm
a
10 10 10 10 PRKSFJ150/100
PRKSFJ200/100 PRKSFJ200/150 PRKSFJ300/200
150 200 200 300
100 100 150 200 a
1.0
a
1.0
N N N N N N
MATERIAL Steel, strip-galv. acc. to
the Sendzimir method to PN-EN 10346:2011.
APPLICATIONS
Cable protection against damage.
Used in heavy dust indoor conditions
Cover for Add-on Tee
≠ 1.2 mm
Cable Tray
KG.../KGO...
KCP/KCOP...H60
3000
KCP/KCOP100H60/3 100 2.49 161410 6/18 Length
mm
L
CODE
Width mm
a
Catalogue 1 m No.
kg Connecting cable trays by sliding-in and screwing together
KGL/KGOL...H60
3000
KGL/KGOL100H60/3 100 1.18 160116 6/18 Length
mm
L
CODE
Width mm
a
Catalogue No.
1 m kg
3000
KGL/KGOL200H60/3 200 1.68 160316 6/18 KGL/KGOL300H60/3 3000 300 2.18 160416 4/12
KGJ/KGOJ...H60
3000
KGJ/KGOJ100H60/3 100 1.63 160816 6/18 Length
mm
L
CODE
Width mm
a
Catalogue No.
1 m kg
APPLICATION Cable routing
KCP/KCOP200H60/3
KCP/KCOP500H60/3 KCP/KCOP600H60/3 KCP/KCOP300H60/3 KCP/KCOP400H60/3
3000
3000 3000 3000 3000
200
500 600 300 400
3.48
6.48 4.48 5.48
161420
160850 161430 160840
4/12
2/6 4/12
2/6 KCP/KCOP150H60/3 3000 150 2.99 161415 6/18
7.47 160860 2/6
KCJ/KCOJ...H60
KCJ/KCOJ100H60/3 3000 100 1.63 161010 6/18 Length
mm
L
CODE
Width mm
a
Catalogue 1 m No.
kg
3000
KCJ/KCOJ200H60/3 200 2.28 161020 4/12 3000
KCJ/KCOJ300H60/3 300 2.96 161030 4/12 3000
KCJ/KCOJ400H60/3 400 3.65 160440 2/6 3000
KCJ/KCOJ150H60/3 150 1.98 161015 6/18 KGJ/KGOJ150H60/3 3000 150 1.98160916 6/18 KGJ/KGOJ200H60/3
KGJ/KGOJ300H60/3 KGJ/KGOJ400H60/3
3000 200 3000 300 3000 400
2.28 2.96 3.65
161016 6/18 161116 4/12 161216 4/12 KGL/KGOL150H60/3 3000 150 1.43 160216 6/18
KCP/KCOP...
7x32 7x55
L Ø11
7x20
60
7x26
60
a
26
7x20
KC.../KCO...
≠ 1.5 mm
≠ 1.0 mm
≠ 0.7 mm
≠ 1.0 mm 3000
KCL/KCO 100H60/3L 100 1.18 160810 6/18 Length
mm
L
CODE
Width mm
a
Catalogue No.
1 m kg
3000
KCL/KCOL200H60/3 200 1.68 160820 6/18 KCL/KCOL300H60/3 3000 300 2.18 160830 4/12
3000
KCL/KCOL150H60/3 150 1.43 160815 6/18
≠ 0.7 mm Qty/m
Qty/m
Qty/m
Qty/m
KBJ...H60
3000
KBJ100H60/3 100 162210 6/18
Length mm
L
CODE
Width mm
a
Catalogue No.
1 m kg
KBJ150H60/3 3000 150 162215 6/18 3000
KBJ200H60/3
3000 KBJ300H60/3
3000 KBJ400H60/3
200 300 400
2.00
2.80 3.60 4.40 2.40
162220 162230 161640
6/18 4/12 2/6 Connecting cable trays by sliding-in and screwing together
≠ 1.0 mm
Qty/m Qty/m
KCD/KCOD...H60
3000
KCD/KCOD100H60/3 100 161210 6/18 Length
mm
L
CODE
Width mm
a
Catalogue No.
1 m kg
KCD/KCOD150H60/3 3000 150 161215 6/18 3000
KCD/KCOD200H60/3 3000 KCD/KCOD300H60/3
3000 KCD/KCOD400H60/3
200 300 400
2.07
2.90 3.33 3.73 2.49
161220 161230 160640
4/12 4/12 2/6 Qty/m
Connecting cable trays by sliding-in and screwing together
KBJ...
KCL/KCOL...H60
Max. safe load: 20 kg/m Max. spacing of supports: 1.5 m
Connecting cable trays only with connectors 7×26
60
a
7×20
7x20 26
60
a
L
KG.../KC...50H60
7x20
60
50 7x26
L Ø11
Qty/m
KGL/KCL50H60
CODE
Length mm
L
Catalogue No.
1 m kg
≠ 0.7 mm
KGL/KCL50H60/3 3000 0.98160424 12/36
XIX
Qty/m
KBL...H60
Length mm
L
CODE
Width mm
a
Catalogue No.
1 m kg
≠ 0.7 mm
3000 100
3000 150
3000 200
3000 300 KBL100H60/3
KBL150H60/3 KBL200H60/3
KBL300H60/3 162030
162010 162015 162020
4/12 6/18 6/18 6/18 2.64
1.44 1.74 2.04
KBL400H60/3 400 3000 3.24161440 4/12
Max. safe load: 20 kg/m Max. spacing of supports: 1.5 m
Max. safe load: 20 kg/m Max. spacing of supports: 1.5 m Max. safe load: 20 kg/m Max. spacing of supports: 1.5 m
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method PN-EN 10346:2011 Available finishes:
L- powder coating in a full range of colours (PC) (info p.4)
E-30. E-90 system – Cable trays made from steel strip-galv. Acc to the Sendzimir metod to EN 10346:2011
Thickn. (ga) ≠ [mm]: 0.7 1.0 1.2
1.5 2.0Cable Tray
KC.../KCO...E
Max. safe load: 20 kg/m Max. spacing of supports: 1.5 m
KCJ/KCOJ...H60E
3000
KCJ/KCOJ100H60/3E 100 1.63 861910 6/18 Length
mm
L
CODE
Width mm
a
Catalogue No.
1 m kg
3000
KCJ/KCOJ200H60/3E 200 2.28 861920 4/12 3000
KCJ/KCOJ300H60/3E 300 2.96 861930 4/12 3000
KCJ/KCOJ400H60/3E 400 3.65 861940 2/6 3000
KCJ/KCOJ150H60/3E 150 1.98 861915 6/18
≠ 1.0 mm
Qty/m
≠ 1.2 mm 3000
KCL/KCO 100H60/3EL 100 1.18 867911 6/18 Length
mm
L
CODE
Width mm
a
Catalogue No.
kg 3000
KCL/KCOL200H60/3E 200 1.68 861921 6/18 KCL/KCOL300H60/3E 3000 300 2.18 861931 4/12
3000
KCL/KCOL150H60/3E 150 1.43 861916 6/18
≠ 0.7 mm
Qty/m
KCD/KCOD...H60E
KCD/KCOD100H60/3E 3000 100 861912 6/18 Length
mm
L
CODE
Width mm
a
Catalogue 1 m No.
kg
KCD/KCOD150H60/3E 3000 150 861917 6/18 3000
KCD/KCOD200H60/3E 3000 KCD/KCOD300H60/3E
3000 KCD/KCOD400H60/3E
200 300 400
2.07 2.90 3.33 3.73 2.49
861922 861932 861933
4/12 4/12 2/6 Qty/m
KCL/KCOL...H60E
KCP/KCOP...H60E
KCP/KCOP100H60/3E 3000 100 2.49 861010 6/18 Length
L mm CODE
Width a mm
Catalogue No.
1 m
3000
KCP/KCOP400H60/3E 400 5.48 861040 2/6 KCP/KCOP150H60/3E 3000 150 2.99 861015 6/18 KCP/KCOP300H60/3E
KCP/KCOP200H60/3E 3000 3000
200 300
3.48
4.48 4/12
861020 4/12 861030
Connecting cable trays only with connectors
≠ 1.5 mm
Qty/m
KCP/KCOP...E
KBJ...H60E
3000
KBJ100H60/3E 100 164713 6/18 Length
mm
L
CODE
Width mm
a
Catalogue No.
1 m kg
KBJ150H60/3E 3000 150 164813 6/18 3000
KBJ200H60/3E 3000 KBJ300H60/3E KBJ400H60/3E 3000
200 300 400
2.00
2.80 3.60 4.40 2.40
164913 165013 165113
4/12 4/12 2/6 Connecting cable trays by sliding-in and screwing together
≠ 1.0 mm
Qty/m
KB...E
KCP/KCOP500H60/3E KCP/KCOP600H60/3E
3000 3000
500 600
6.48 861050 2/6 7.47 861060 2/6 Connecting cable trays by sliding-in and screwing together
kg 1 m
APPLICATION Cable routing
7x26
60
a
26
7x20
7×26
60
a
7×20
7x20 26
60
a
L
Qty/m
KBL...H60E
Length mm
L
CODE
Width mm
a
Catalogue 1 m No.
kg
≠ 0.7 mm
3000 100
3000 150
3000 200
3000 300 KBL100H60/3E
KBL150H60/3E KBL200H60/3E
KBL300H60/3E 164213
163913 164013 164113
4/12 6/18 6/18 6/18 2.64
1.44 1.74 2.04
KBL400H60/3E 400 3000 3.24164313 4/12
E-30. E-90 system – Cable trays made from stainless steel 1.4301 (A2) or 1.4401 (A4)
MATERIAL
Stainless steel, grade 1.4301 (AISI304) Available finishes:
L- powder coating in a full range of colours (PC) (info p.4)
KCP/KCOP...H60F
3000
KCP/KCOP100H60/3F 100 2.49 169311 6/18 Length
mm
L
CODE
Width mm
a
Catalogue No.
1 m kg
APPLICATION Cable routing
KCP/KCOP200H60/3F
KCP/KCOP500H60/3F KCP/KCOP600H60/3F KCP/KCOP300H60/3F KCP/KCOP400H60/3F
3000
3000 3000 3000 3000
200
500 600 300 400
3.48
6.48 4.48 5.48
169321
169351 169331 169341
4/12
2/6 4/12
2/6 KCP/KCOP150H60/3F 3000 150 2.99 169314 6/18
7.47 169361 2/6
KBJ...H60F
3000
KBJ100H60/3F 100 169211 6/18 Length
mm
L
CODE
Width mm
a
Catalogue No.
1 m kg
KBJ150H60/3F 3000 150 169214 6/18 KBJ200H60/3F 3000
3000 KBJ300H60/3F
3000 KBJ400H60/3F
200 300 400
2.00 2.80 3.60 4.40 2.40
169221 169231 169241
4/12 4/12 2/6
KC.../KCO...F
Connecting cable trays by sliding-in and screwing together Connecting cable trays only with connectors
≠ 1.5 mm
≠ 1.0 mm
Qty/m Qty/m
Cable Tray
Max. safe load: 20 kg/m Max. spacing of supports: 1.5 m
≠ 1.2 mm
KCD/KCOD...H60F
3000
KCD/KCOD100H60/3F 100 169111 6/18 Length
mm
L
CODE
Width mm
a
Catalogue No.
1 m kg
KCD/KCOD150H60/3F 3000 150 169114 6/18 KCD/KCOD200H60/3F 3000
3000 KCD/KCOD300H60/3F
3000 KCD/KCOD400H60/3F
200 300 400
2.07 2.90 3.33 3.73 2.49
169121 169131 169141
4/12 4/12 2/6 Qty/m
Connecting cable trays by sliding-in and screwing together
KCJ/KCOJ...H60F
3000
KCJ/KCOJ100H60/3F 100 1.63 169611 6/18 Length
mm
L
CODE
Width mm
a
Catalogue No.
1 m kg
KCJ/KCOJ200H60/3F 3000 200 2.28 169621 4/12 3000
KCJ/KCOJ300H60/3F 300 2.96 169631 4/12 3000
KCJ/KCOJ400H60/3F 400 3.65 169641 2/6 3000
KCJ/KCOJ150H60/3F 150 1.98 169616 6/18
≠ 1.0 mm
Qty/m
KCP/KCOP...F
KBJ...F
7x26
60
a
26
7x20
7×26
60
a
7×20
7x20 26
60
a
L
XIX E-30. E-90 system – Cable trays made from steel, hot-dip galv. to EN ISO 1461:2011
MATERIAL
Steel, hot-dip galvanised to PN-EN ISO 1461:2011 (HDG) Available finishes:
L- powder coating in a full range of colours (PC) (info p.4)
Thickn. (ga) ≠ [mm]: 0.7 1.0 1.2
1.5 2.0LGP/LGOPH60
Articulated Connector
LPP/LPOPH60
Straight Connector
LKJ/LKOJH60
Angle Connector
130
55
6.5x9
7x20
50
140
LPP/LPOPH60
LPP/LPOPH60 0.09 163111 100
CODE Catalogue
No.
1 pc kg
Qty
LGP/LGOPH60
LGP/LGOPH60 0.14 162100 100
CODE Catalogue
1 pc No.
kg Qty
LKJ/LKOJH60
LKJ/LKOJH60 0.03 162500 100
CODE Catalogue
No.
1 pc kg
Qty
≠ 1.5 mm
≠ 1.5 mm
≠ 1.0 mm
LPP/LPOPH60 BL/BLO
SGKM6x12
System E-30, E-90 - Cable Tray accessories
BL/BLO
Joint Protection Plate
BZK/BZKO
Edge Protection Plate
BL/BLO...
BL/BLO100 96 0.06 100110 100 CODE
Length mm
L
Catalogue 1 pc No.
kg Qty
BL/BLO150 146 0.09 100115 100 BL/BLO200 196 0.13 100120 100 BL/BLO300 296 0.19 100130 100 BL/BLO400 396 0.26 100140 30 BL/BLO500 496 0.32 100150 30 BL/BLO600 596 0.39 100160 30
BZK/BZKO...
BZK/BZKO100 96 0.04 100210 100 CODE
Length mm
L
Catalogue No.
1 pc
kg Qty
BZK/BZKO150 146 0.06 100215 100 BZK/BZKO200 196 0.08 100220 100 BZK/BZKO300 296 0.12 100230 100 BZK/BZKO400 396 0.16 100240 30 BZK/BZKO500 496 0.19100250 30 BZK/BZKO600 596 0.23 100260 30
≠ 1.0 mm
≠ 1.0 mm
LGP/LGOPH60
SGKM6x12 BZK/BZKO
KCP/KCOP
50
7x20 52.5 105
L L 7x14
For the assembly use min. 4 sets of Screw SGKM6x12
For the assembly use min. 4 sets of Screw SGKM6x12
For the assembly use min. 4 sets of Screw SGKM6x12
APPLICATION Joining cable tray sections
Application Example of Joint Protection Plate BL/BLO...
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method PN-EN 10346:2011 Available finishes:
F - steel, hot-dip galvanised to PN-EN ISO 1461:2011 (HDG) E - stainless steel, grade 1.4301 (AISI304) L - powder coating in a full range of colours (PC) (info p.4)
APPLICATION
Protecting cables against damage when pulling them. Additionally stiffened joint area in the cable tray.
For the assembly use:
- Width 100÷200 mm - min. 2 sets of Screw - Width 300÷400 mm - min. 3 sets of Screw
- Width 500÷600 mm - min. 5 sets of Screw SGKM6x12 Necessary to use for joining cable trays.
For the assembly use:
- Width 100÷200 mm - min. 4 sets of Screw - Width 300÷400 mm - min. 6 sets of Screw
- Width 500÷600 mm - min. 10 sets of Screw SGKM6x12
APPLICATION
Protecting cables against damage in the cable tray end.
Application Example of Edge Protection Plate BZK/BZKO...
KKPP/KKPOP
90° Horizontal Bend
APPLICATION Diversion in cable routing.
KKMPP/KKMPOP
45° Horizontal Bend
KKPP/KKPOP...H60
KKPP/KKPOP100H60 100 0.90 160814 20 CODE
Width mm
a
Catalogue No.
1 pc kg
Qty
KKPP/KKPOP150H60 150 1.23 160914 10 KKPP/KKPOP200H60 200 1.60 161014 10 KKPP/KKPOP300H60 300 2.48 161114 10 KKPP/KKPOP400H60 400 3.44 161214 10 KKPP/KKPOP500H60 500 4.81 161314 10 KKPP/KKPOP600H60 600 6.24 161414 10
KKMPP/KKMPOP...H60
KKMPP/KKMPOP100H60 100 0.51 162214 20 CODE
Width mm
a
Catalogue No.
1 pc
kg Qty
KKMPP/KKMPOP150H60 150 0.69 162314 10 KKMPP/KKMPOP200H60 200 0.89 162414 10 KKMPP/KKMPOP300H60 300 1.36 162514 10 KKMPP/KKMPOP400H60 400 1.93 162614 10 KKMPP/KKMPOP500H60 500 2.58 10 KKMPP/KKMPOP600H60 600 3.33 162814 10
≠ 1.5 mm
≠ 1.5 mm
System E-30, E-90 - Cable Tray accessories
KKMBJ...H60
KKMBJ100H60 100 0.29 160103 20 CODE
Width mm
a
Catalogue 1 pc No.
kg Qty
KKMBJ150H60 150 0.41 160203 10 KKMBJ200H60 200 0.55 160303 10 KKMBJ300H60 300 0.91 160503 10 KKMBJ400H60 400 1.54 160603 10
≠ 1.0 mm
KKMBJ
KKBJ
KKPP/KKPOP200H60
KBJ200H60
KCP/KCOP200H60 KKBJ200H60
a
a
R140 7x33
a a
R140 7x33
a 45°
a
7x33 a 55
b
7x33
162714
KKBJ...H60
KKBJ100H60 100 0.41 160101 20 CODE
Width
a=b
mmCatalogue No.
1 pc
kg Qty
KKBJ150H60 150 0.58 160201 10 KKBJ200H60 200 0.79 160301 10 KKBJ300H60 300 1.30 160501 10 KKBJ400H60 400 2.20 160601 10
≠ 1.0 mm
SGKM6x12 SGKM6x12
XIX
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method PN-EN 10346:2011 Available finishes:
F - steel, hot-dip galvanised to PN-EN ISO 1461:2011 (HDG) E - stainless steel, grade 1.4301 (AISI304) L - powder coating in a full range of colours (PC) (info p.4)
Application Example of 90° Horizontal Bend KKBJ... Application Example 90° Horizontal Bend KKPP/KKPOP...
For the assembly use:
- Width 100÷200 - min. 10 sets of Screw - Width 300÷400 - min. 12 sets of Screw - Width 500÷600 - min. 14 sets of Screw SGKM6x12
For the assembly use:
- Width 100÷200 - min. 10 sets of Screw - Width 300÷400 - min. 12 sets of Screw - Width 500÷600 - min. 14 sets of Screw SGKM6x12 For the assembly use:
- Width 100÷200 - min. 10 sets of Screw - Width 300÷400 - min. 12 sets of Screw - Width 500÷600 - min. 14 sets of Screw SGKM6x12
For the assembly use:
- Width 100÷200 - min. 10 sets of Screw - Width 300÷400 - min. 12 sets of Screw - Width 500÷600 - min. 14 sets of Screw SGKM6x12
Thickn. (ga) ≠ [mm]: 0.7 1.0 1.2
1.5 2.0System E-30, E-90 - Cable Tray accessories
TKPP/TKPOP
Horizontal Tee
CZKPP/CZKPOP
Horizontal Cross-over
TKPP/TKPOP...H60
100 20
CODE
Width mm
a
Catalogue No.
1 pc kg
Qty
150 10
200 10
300 10
400 10
500 10
600 10
CZKPP/CZKPOP...H60
CZKPP/CZKPOP100H60 100 20
CODE
Width mm
a
Catalogue No.
1 pc
kg Qty
CZKPP/CZKPOP150H60 150 10
CZKPP/CZKPOP200H60 200 10
CZKPP/CZKPOP300H60 300 10
CZKPP/CZKPOP400H60 400 10
CZKPP/CZKPOP500H60 500 2
CZKPP/CZKPOP600H60 600 2
≠ 1.5 mm
≠ 1.5 mm a
R140 7x33
a
a
R140
7x33
TKPP/TKPOP600H60 8.82 164214 TKPP/TKPOP300H60
TKPP/TKPOP400H60 TKPP/TKPOP100H60 TKPP/TKPOP200H60
TKPP/TKPOP500H60
163914 164014 163614 163814
164114 1.48
3.71 5.18 2.48
6.88
4.32 5.92 1.84 2.97
7.74 9.80
165314 165414 165014 165214
165514 165614 TKPP/TKPOP150H60 1.95 163714
2.38 165114
APPLICATION Branching out cable runs
TKBJ...H60
TKBJ100H60 100 0.45 160901 20 CODE
Width
a=b=c
mm
Catalogue No.
1 pc kg
Qty
TKBJ150H60 150 0.64 161001 10 TKBJ200H60 200 0.90 161101 10 TKBJ300H60 300 1.49 161301 10 TKBJ400H60 400 2.26 161401 10
≠ 1.0 mm
TKBJ
CZKBJ
max. 150 mm max. 600 mm
max.
150 mm
max. 1.5 m
CZKPP/CZKPOP
KCP/KCOP max.
150 mm
max. 150 mm
55 b
c
7x33
a
55 b
c
7x33
a
d
KKPP/KKPOP
KCP/KCOP
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method PN-EN 10346:2011 Available finishes:
F - steel, hot-dip galvanised to PN-EN ISO 1461:2011 (HDG) E - stainless steel, grade 1.4301 (AISI304) L - powder coating in a full range of colours (PC) (info p.4)
Recommended way to support the 90° Horizontal Bend close to the connection with cable trays
Recommended way to support the Horizontal Cross-over close to the connection with cable trays
max distance to the next support 1200 mm
For the assembly use:
- Width 100÷200 - min. 20 sets of Screw - Width 300÷400 - min. 24 sets of Screw - Width 500÷600 - min. 28 sets of Screw SGKM6x12
CZKBJ...H60
CZKBJ100H60 100 0.48 160903 20 CODE
Width
a=b=c=d
mm
Catalogue No.
1pc.
kg Qty
CZKBJ150H60 150 0.67 161003 10 CZKBJ200H60 200 0.96 161103 10 CZKBJ300H60 300 1.49 161303 10 CZKBJ400H60 400 2.28 161403 10
≠ 1.0 mm For the assembly use:
- Width 100÷200 - min. 15 sets of Screw - Width 300÷400 - min. 18 sets of Screw
- Width 500÷600 - min. 21 sets of Screw SGKM6x12 For the assembly use:
- Width 100÷200 - min. 15 sets of Screw - Width 300÷400 - min. 18 sets of Screw
- Width 500÷600 - min. 21 sets of Screw SGKM6x12
For the assembly use:
- Width 100÷200 - min. 20 sets of Screw - Width 300÷400 - min. 24 sets of Screw - Width 500÷600 - min. 28 sets of Screw SGKM6x12
LLP/LLOP
Adjustable Vertical Bend LLP/LLOP...H60
LLP/LLOP100H60 100 10
CODE
Width mm
a
Catalogue No.
1 pc kg
Qty
LLP/LLOP150H60 150 10
LLP/LLOP200H60 200 10
LLP/LLOP300H60 300 4
LLP/LLOP400H60 400 4
LLP/LLOP500H60 500 4
LLP/LLOP600H60 600 4
≠ 1.5 mm
a 60
7×20
3.00 3.50 2.00 2.50
4.00 4.49
164040 164010 164020 164030
164060 164050 164015 2.25
System E-30, E-90 - Cable Tray accessories
LLBJ LLBJ...H60
LLBJ100H60 100 10
CODE
Width mm
a
Catalogue No.
1 pc kg
Qty
LLBJ150H60 150 10
LLBJ200H60 200 10
LLBJ300H60 300 4
LLBJ400H60 400 4
1.98 2.32 1.32 1.60
163001 162501
162701 162901 162601 1.50
a
150
≠ 1.0 mm
60
a
150
Ø7
a
150
60
Ø7
ELP...H60
ELP100H60 100 10
CODE
Width mm
a
Catalogue 1 pc No.
kg Qty
ELP150H60 150 10
ELP200H60 200 10
ELP300H60 300 4
ELP400H60 400 4
ELP500H60 500 4
ELP600H60 600 4
≠ 1.5 mm
1.12 1.37 0.62 0.87
1.62 1.86
164240 164210
164220 164230
164260 164250 164215 0.74
ELBJ...H60
ELBJ100H60 100 10
CODE
Width mm
a
Catalogue 1 pc No.
kg Qty
ELBJ150H60 150 10
ELBJ200H60 200 10
ELBJ300H60 300 4
ELBJ400H60 400 4
0.74 0.91 0.41 0.58
163003 162503
162703 162903 162603 0.50
≠ 1.0 mm
ELP
ELBJ
Adjustable Vertical Bend Element
KCP/KCOP LLP/LLOP
BZK/BZKO
SGKM6x12 60
XIX
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method PN-EN 10346:2011 Available finishes:
F - steel, hot-dip galvanised to PN-EN ISO 1461:2011 (HDG) E - stainless steel, grade 1.4301 (AISI304) L - powder coating in a full range of colours (PC) (info p.4)
APPLICATION Diversions in cable routing.
Full-range angle adjustment with a lock.
Application Example of Adjustable Vertical Bend Element LLP/LLOP...
For the assembly use min. 8 sets of Screw SGKM6x12
Possibility of creating adjustable vertical bends of any internal radius through adding up bend elements
For the assembly use min. 8 sets of Screw SGKM6x12
Possibility of creating adjustable vertical bends of any internal radius through adding up bend elements
System E-30, E-90 - Cable Tray accessories
Thickn. (ga) ≠ [mm]: 0.7 1.0 1.2
1.5 2.0RKLBJ
RKLP
Left Reducer
RKLP...H60
RKLP150/100H60 100 10
CODE
Width mm
b
Catalogue No.
1 pc
kg Qty
RKLP200/100H60 100
RKLP200/150H60 150
RKLP300/200H60 200
RKLP400/300H60 300
≠ 1.5 mm
0.43 0.51 0.62
165820 165730 165640 0.39 165720 0.34 165615
10 10 10 10 150
Width mm
a
200 200 300 400
RKLBJ...H60
RKLBJ150/100H60 100 10
CODE
Width mm
b
Catalogue No.
1 pc
kg Qty
RKLBJ200/100H60 100 RKLBJ200/150H60 150 RKLBJ300/200H60 200 RKLBJ400/300H60 300
≠ 1.0 mm
0.30 0.37 0.41
166001 166201 166401 0.28 165901 0.23 165801
10 10 10 10 150
Width mm
a
200 200 300 400
RKLP500/400H60 400
RKLP600/500H60 500
0.74 0.85
165650 165660
10 10 500
600
RKPP...H60
RKPP150/100H60 100 10
CODE
Width mm
b
Catalogue No.
1 pc kg
Qty
RKPP200/100H60 100
RKPP200/150H60 150
RKPP300/200H60 200
RKPP400/300H60 300
≠ 1.5 mm
0.43 0.51 0.62
167802 167902 165840 0.39 167702 0.34 165815
10 10 10 10 150
Width mm
a
200 200 300 400
RKPBJ...H60
RKPBJ150/100H60 100 10
CODE
Width mm
b
Catalogue No.
1 pc
kg Qty
RKPBJ200/100H60 100 RKPBJ200/150H60 150 RKPBJ300/200H60 200 RKPBJ400/300H60 300
≠ 1.0 mm
0.30 0.37 0.41
166003 166203 166403 0.28 165903 0.23 165803
10 10 10 10 150
Width mm
a
200 200 300 400
RKPP500/400H60 400
RKPP600/500H60 500
0.74 0.85
165850 165860
10 10 500
600
RKPBJ
RKPP
Right Reducer
RKSP
Straight Reducer
RKSBJ
RKSP...H60
RKSP150/100H60 100 10
CODE
Width mm
b
Catalogue No.
1 pc kg
Qty
RKSP200/100H60 100
RKSP200/150H60 150
RKSP300/200H60 200
RKSP400/300H60 300
≠ 1.5 mm
0.43 0.51 0.62
168602 168702 166040 0.39 168502 0.34 166015
10 10 10 10 150
Width mm
a
200 200 300 400
RKSP500/400H60 400
RKSP600/500H60 500
0.74 0.85
166050 166060
10 10 500
600
RKSBJ...H60
RKSBJ150/100H60 100 10
CODE
Width mm
b
Catalogue No.
1 pc
kg Qty
RKSBJ200/100H60 100 RKSBJ200/150H60 150 RKSBJ300/200H60 200 RKSBJ400/300H60 300
≠ 1.0 mm
0.30 0.37 0.41
167001 167201 167401 0.28 166901 0.23 166801
10 10 10 10 150
Width mm
a
200 200 300 400 b
a
95
7x33 b
a
95
7x33 b
a
95
7x33
KCP/KCOP
RKPP
SGKM6x12
KCP/KCOP
RKLP SGKM6x12 b
a
95
7x33
b
a
95
7x33
b
a
95
7x33
Application Example of Right Reducer RKPP APPLICATION
Reducing/extending widths of cable runs
Application Example of Left Reducer RKLP MATERIAL
Steel, strip-galv. acc. to the Sendzimir method PN-EN 10346:2011 Available finishes:
F - steel, hot-dip galvanised to PN-EN ISO 1461:2011 (HDG) E - stainless steel, grade 1.4301 (AISI304) L - powder coating in a full range of colours (PC) (info p.4)
For the assembly use Screw SGKM6x12
For the assembly use Screw SGKM6x12
For the assembly use Screw SGKM6x12
TKD...
Add-on Tee
TKDP...H60
TKDP100H60 100 10
CODE
Width mm
a
Catalogue No.
1 pc kg
Qty
TKD 150H60P 150 10
TKDP200H60 200 10
TKDP300H60 300 10
TKDP400H60 400 10
TKDP500H60 500 10
TKDP600H60 600 10
≠ 1.5 mm
1.50 1.71
169840 169810
169820 169830
169860 169850 169815
System E-30, E-90 - Cable Tray accessories
APPLICATION Branching out cable runs
TKDJ...H60
TKDJ100H60 100 10
CODE
Width mm
a
Catalogue 1 pc No.
kg Qty
TKDJ150H60 150 10
TKDJ200H60 200 10
TKDJ300H60 300 10
TKDJ400H60 400 10
0.72 0.86 0.44 0.58
169740 169710
169720 169730 169715 0.51
≠ 1.0 mm
R140 7x33 a
Angle Reducer
7x33 a
37
7x14 7x31 42
61
7x26
RKJ...H60
RKJ50H60 50 10
CODE
Width mm
a
Catalogue No.
1 pc
kg Qty
RKJ100H60 100 10
RKJ150H60 150 10
RKJ200H60 200 0.17 10
0.06 0.13
169706 169716 169721 169711 0.09
≠ 1.0 mm
RKJ
TKDP
RKJ 1.08
1.29 0.66 0.87 0.76
KCP/KCOP
KCP/KCOP 20
2
H
Cover Clamp
ZPD
ZPDH60
61
ZPDH60 160800 100
Height mm
H
CODE Catalogue
No. Qty
ZPDH60 KGL/KGOL
PKL
SGKM6x12
SGKM6x12 SGKM6x12
20
Cover Clamp
ZPN
ZPN...
CODE
Height mm
H
Catalogue No.
ZPN...E
CODE
Height mm
H
Catalogue No.
ZPN...F
CODE
Height mm
H
Catalogue No.
12
H
100
ZPNH60 165000
100
ZPNH60F 165200
100
ZPNH60E 165100
29
29 29
Qty Qty Qty
XIX
Example of application of Add-on Tee TKDP...H60 For the assembly use Screw
Benefits of Application
- possibility of branching out the existing cable routes - suits all cable tray perforations from BAKS
- stiffened structure guarantees increased rigidity of the joint SGKM6x12
APPLICATION
Reducing/extending widths of cable runs
Example of application of Angle Reducer RKJ...H60
APPLICATION
Preventing the cover from slipping
For the assembly use Screw SGKM6x12
By selection of apropriate element we can reduce widht of the cable tray by 50. 100 or 200 mm. For example by attaching RKP200H60 to KCJ/KCOJ400H60. we can transfer it to KCJ/KCJOJ200H60.
Example of application Cover Clamp ZPDH60
MATERIAL
Electro-galv. steel strip (EG) (ZPN) Stainless steel (SS), grade 1.4301 (AISI304) strip (SS) (ZPN E) Hot-dip galv. steel strip (HDG) to PN-EN ISO 1461:2011 (ZPN F)
MATERIAL
Quality steel strap – hardened and electro-galv. (EG) (ZPD).
Available to order:
F- hot-dip galv. steel (HDG) to PN-EN ISO 1461:2011 (ZPD) E - stainless steel (SS), grade 1.4301 (AISI304) (ZPD)
L - powder coating in a full range of colours (PC) (info p. 4)
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method PN-EN 10346:2011 Available finishes:
F - steel, hot-dip galvanised to PN-EN ISO 1461:2011 (HDG) E - stainless steel, grade 1.4301 (AISI304) L - powder coating in a full range of colours (PC) (info p.4)
System E-30, E-90 - Cable Tray accessories
Thickn. (ga) ≠ [mm]: 0.7 1.0 1.2
1.5 2.0Cover
PK...
≠ 1.2 mm
PKP...
3000
PKP100/3 100 1.56 101210 6/18 Length
mm
L
CODE
Width mm
a
Catalogue No.
1 m kg
PKL...
3000
PKL100/3 100 0.72 100610 10/30 Length
mm
L
CODE
Width mm
a
Catalogue No.
1 m kg
3000
PKL200/3 200 1.32 100620 6/18 3000
PKL300/3 300 1.92 100630 6/12
PKJ...
PKJ100/3 3000 100 1.04 100810 10/30 Length
mm
L
CODE
Width mm
a
Catalogue 1 m No.
kg
PKP200/3
PKP500/3 PKP600/3 PKP300/3 PKP400/3
3000
3000 3000 3000 3000
200
500 600 300 400
2.76
6.36 3.96 5.16
101220
101050 101230 101040
4/12
2/6 4/12 4/12 PKP150/3 3000 150 2.16 101215 6/18
7.56 101060 2/6 PKJ150/3 3000 150 1.44100815 6/18 PKJ200/3
PKJ300/3 PKJ400/3
3000 200 3000 300 3000 400
1.84 2.64 3.44
100820 6/18 100830 6/18 100640 6/18 PKL150/3 3000 150 1.02 100615 6/18
≠ 1.5 mm
≠ 1.0 mm
≠ 0.7 mm
Qty/m
Qty/m
Qty/m
PKD...
3000
PKD100/3 100 101010 6/18
Length mm
L
CODE
Width mm
a
Catalogue No.
1 m kg
PKD150/3 3000 150 101015 6/18 3000
PKD200/3 PKD300/3 3000
3000 PKD400/3
200 300 400
1.30
2.30 3.30 4.30 1.80
101020 101030 100840
4/12 4/12 4/12 Qty/m
Cover for 90° Horizontal Bend
PKKPP...
PKKPP100 100 0.24 101013 20
CODE
Width mm
a
Catalogue No.
1 pc kg
PKKPP200
PKKPP500 PKKPP600 PKKPP300 PKKPP400
200
500 600 300 400
0.67
3.39 1.35 2.25
101213
101513 101313 101413
20
10 10 10
PKKPP150 150 0.42 101113 20
4.74 101613 10
≠ 1.5 mm
Qty
PKKJ...
PKKJ100 100 0.16 102410 20
CODE
Width mm
a
Catalogue 1 pc No.
kg
PKKJ150 150 0.28102415 20
PKKJ200 PKKJ300 PKKJ400
200 300 400
0.45 0.90 1.50
102420 20 102430 10 102440
≠ 1.0 mm
Qty
10
PKKMPP...
PKKMPP100 100 0.17 102613 20 CODE
Width mm
a
Catalogue 1 pc No.
kg
PKKMPP200
PKKMPP500 PKKMPP600 PKKMPP300 PKKMPP400
200
500 600 300 400
0.48
2.40 0.98 1.61
102813
103113 102913 103013
20
10 10 10 PKKMPP150 150 0.30 102713 20
3.33 103213 10
≠ 1.5 mm
Qty
PKKMJ...
PKKMJ100 100 0.11 102710 20
CODE
Width mm
a
Catalogue No.
1 pc kg
PKKMJ150 150 0.20102715 20
PKKMJ200 PKKMJ300 PKKMJ400
200 300 400
0.32 0.65 1.07
102720 20 102730 10 102740
≠ 1.0 mm
Qty
10
Cover for 45° Horizontal Bend
PKKMJ PKKJ
PKKPP
PKKMPP
0.7÷1.5
a
R 5
a
1.0
a
1.5
a
1.0
a
1.5
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method PN-EN 10346:2011 Available finishes:
F - steel, hot-dip galvanised to PN-EN ISO 1461:2011 (HDG) E - stainless steel, grade 1.4301 (AISI304) L - powder coating in a full range of colours (PC) (info p.4)
APPLICATION
Eliminating the risk of mechanical damage to cables. Improving overall aesthetic appearance of cable runs
System E-30, E-90 - Cable tray accessories
PTKPP...
PTKPP100 100 0.30 104213 20
CODE
Width mm
a
Catalogue No.
1 pc kg
PTKJ...
PTKJ100 100 0.20 103010 20
CODE
Width mm
a
Catalogue No.
1 pc kg
PTKPP200
PTKPP500 PTKPP600 PTKPP300 PTKPP400
200
500 600 300 400
0.80
3.62 1.50 2.46
104413
104713 104513 104613
20
10 10 10
PTKPP150 150 0.52 104313 20
5.02 104813 10
PTKJ150 150 0.35 103015 20
PTKJ200 PTKJ300 PTKJ400
200 300 400
0.54 1.00 1.64
103020 20 103030 10 103040
≠ 1.5 mm
≠ 1.0 mm
Qty
Qty 10
PTKJ
PTKPP
PCZKPP...
PCZKPP100 100 0.37 107413 20 CODE
Width mm
a
Catalogue No.
1 pc kg
PCZKJ...
PCZKJ100 100 0.20 103310 20
CODE
Width mm
a
Catalogue No.
1 pc kg
PCZKPP200
PCZKPP500 PCZKPP600 PCZKPP300 PCZKPP400
200
500 600 300 400
0.90
3.87 1.68 2.64
107613
107913 107713 107813
20
10 10 10 PCZKPP150 150 0.61 107513 20
5.31 108013 10
PCZKJ150 150 0.35 103315 20
PCZKJ200 PCZKJ300 PCZKJ400
200 300 400
0.54 1.00 1.64
103320 20 103330 10 103340
≠ 1.5 mm
≠ 1.0 mm
Qty
Qty 10
PCZKJ
PCZKPP
Cover for Left Reducer
Cover for Right Reducer
PRKLP...
PRKLP150/100 100 10
CODE
Width mm
b
Catalogue 1 pc No.
kg Qty
PRKLP200/100 100
PRKLP200/150 150
PRKLP300/200 200
PRKLP400/300 300
≠ 1.5 mm
0.26 0.34 0.49
105520 105430 104940 0.24 105420 0.20 104915
10 10 10 10 150
Width mm
a
200 200 300 400
PRKLP500/400 400
PRKLP600/500 500
0.60 0.71
104950 104960
10 10 500
600
PRKPP...
PRKPP150/100 100 10
CODE
Width mm
b
Catalogue No.
1 pc kg
Qty
PRKPP200/100 100
PRKPP200/150 150
PRKPP300/200 200
PRKPP400/300 300
≠ 1.5 mm
0.26 0.34 0.49
106920 106830 105240 0.24 106820 0.20 105215
10 10 10 10 150
Width mm
a
200 200 300 400
PRKPP500/400 400
PRKPP600/500 500
0.60 0.71
105250 105260
10 10 500
600
PRKLJ...
PRKLJ150/100 100 10
CODE
Width mm
b
Catalogue No.
1 pc
kg Qty
PRKLJ200/100 100
PRKLJ200/150 150
PRKLJ300/200 200
PRKLJ400/300 300
≠ 1.0 mm
0.17 0.23 0.32
105320 105230 104840 0.15 105220 0.13 104815
10 10 10 10 150
Width mm
a
200 200 300 400
PRKPJ...
PRKPJ150/100 100 10
CODE
Width mm
b
Catalogue No.
1 pc
kg Qty
PRKPJ200/100 100
PRKPJ200/150 150
PRKPJ300/200 200
PRKPJ400/300 300
≠ 1.0 mm
0.17 0.23 0.32
105920 105830 105140 0.15 105820 0.13 105115
10 10 10 10 150
Width mm
a
200 200 300 400
PRKLJ
PRKLP
PRKPJ
PRKPP
a
1.0
a
1.5
a
1.0
a
1.5
a
1.0
a
1.5
a
1.0
a
1.5
XIX
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method PN-EN 10346:2011 Available finishes:
F - steel, hot-dip galvanised to PN-EN ISO 1461:2011 (HDG) E - stainless steel, grade 1.4301 (AISI304) L - powder coating in a full range of colours (PC) (info p.4)
APPLICATION
Eliminating the risk of mechanical damage to cables. Improving overall aesthetic appearance of cable runs
Cover For Horizontal Tee
Cover for Horizontal
Cross-over
PRKSJ...
PRKSJ150/100 100 10
CODE
Width mm
b
Catalogue 1 pc No.
kg Qty
PRKSJ200/100 100
PRKSJ200/150 150
PRKSJ300/200 200
PRKSJ400/300 300
≠ 1.0 mm
0.17 0.23 0.32
104720 104630 104540 0.15 104620 0.13 104515
10 10 10 10 150
Width mm
a
200 200 300 400
System E-30, E-90 - Cable tray accessories
Thickn. (ga) ≠ [mm]: 0.7 1.0 1.2
1.5 2.0Cover for Straight Reducer
PRKSP...
PRKSP150/100 100 10
CODE
Width mm
b
Catalogue No.
1 pc
kg Qty
PRKSP200/100 100
PRKSP200/150 150
PRKSP300/200 200
PRKSP400/300 300
≠ 1.5 mm
104920 104930 104640 104820 104615
10 10 10 10 150
Width mm
a
200 200 300 400
PRKSP500/400 400
PRKSP600/500 500
104650 104660
10 10 500
600
PTKDP...
PTKDP100 100 0.30 105813 20
CODE
Width mm
a
Catalogue 1 pc No.
kg
PTKDJ...
PTKDJ100 100 0.20 105013 20
CODE
Width mm
a
Catalogue No.
1 pc kg
PTKDP200
PTKDP500 PTKDP600 PTKDP300 PTKDP400
200
500 600 300 400
0.80
3.62 1.50 2.46
106013
106313 106113 106213
20
10 10 10
PTKDP150 150 0.52 105913 20
5.02 106413 10
PTKDJ150 150 0.35 105113 20
PTKDJ200 PTKDJ300 PTKDJ400
200 300 400
0.54 1.00 1.64
105213 20 105313 10 105413
≠ 1.5 mm
≠ 1.0 mm Qty
Qty 10
PTKDJ
Cover for Add-on Tee
PTKDP PRKSJ
PRKSP
PCZKJ
PKJ
PRKSJ
ZPD a
1.0
a
1.5
a
1.0
a
1.5
0.26 0.34 0.49 0.24 0.20
0.60 0.71
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method PN-EN 10346:2011 Available finishes:
F - steel, hot-dip galvanised to PN-EN ISO 1461:2011 (HDG) E - stainless steel, grade 1.4301 (AISI304) L - powder coating in a full range of colours (PC) (info p.4)
APPLICATION
Eliminating the risk of mechanical damage to cables. Improving overall aesthetic appearance of cable runs
Application Example of Covers and Cover Clip ZPD
PD11 WFC/WFCO
60
180
10.5x29
L 7-11x26
15
L 7-11x26
10.5x29
H
60
15
WFL/WFLO
Bracket
Length mm
L
Catalogue CODE No.
455 355 255 165
0.86 0.73 0.60 0.47
720340 720330 720320 720310
WFC/WFCO400 WFC/WFCO300 WFC/WFCO200 WFC/WFCO100
WFC/WFCO...
20
20 1 pc
kg Qty
Spacer
CODE PD11
PD11
0.03803100 100 11
mm
Gauge Catalogue No.
1 pc
kg Qty
WFL/WFLO...
CODE
WFL/WFLO100 170
Length
L
mm
0.30 720110 30 Catalogue
No.
1 pc kg
Qty Height
H
mm 120
System E-30, E-90 - Support System
≠ 2.0 mm
≠ 2.0 mm
≠ 2.0 mm
Ø11
20 30
15
20 20 WFL/WFLO200
WFL/WFLO300 WFL/WFLO400
260 360 460 560
130 130 130 130
0.43 0.58 0.72 0.85
720120 720130 720140 720150
30 20 20 20
WFC/WFCO150
WFL/WFLO150 220 130 0.37 720115 30
205 0.53 720315 20
TRSOM10
PGM10
WFL/WFLO
WFC/WFCO
TRSOM10 PGM10 PSROM10x80
PSROM10x80 WFL/WFLO500
KCP/KCOP KCP/KCOP
Side Holder
Length
L
mm
Catalogue No.
52 0.10 730304
CODE WC50
WC50
100 1 pc
kg
Qty 78
Height mmH
WC50
H
L 45
15
F
9x18 11
APPLICATION Suspending cable runs.
WC50 KGL/KCL/KPL50H60
XIX
N N
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method PN-EN 10346:2011 Available finishes:
F - steel, hot-dip galvanised to PN-EN ISO 1461:2011 (HDG) E - stainless steel, grade 1.4301 (AISI304) L - powder coating in a full range of colours (PC) (info p.4)
For assembly trays use 2 sets of SGKM6x12
For assembly trays use 2 sets of SGKM6x12
APPLICATION
Used together with WFL/WFLO and WFC/WFCO as well as with Snap-In support PMC/PMCO helps to secure firm assembly.
APPLICATION Suspending cable routes
Application Example of Bracket WFL/WFLO... Application Example of Bracket WFC/WFCO... Application Example
of Side Holder WC50