• Nie Znaleziono Wyników

MEMS Micropropulsion

N/A
N/A
Protected

Academic year: 2021

Share "MEMS Micropropulsion"

Copied!
3
0
0

Pełen tekst

(1)

Delft University of Technology

MEMS Micropropulsion

Design, Modeling and Control of Vaporizing Liquid Microthrusters

de Athayde Costa e Silva , M.

DOI

10.4233/uuid:57f725e1-b3f3-455c-83ce-9156b2123c88

Publication date

2018

Document Version

Final published version

Citation (APA)

de Athayde Costa e Silva , M. (2018). MEMS Micropropulsion: Design, Modeling and Control of Vaporizing

Liquid Microthrusters. https://doi.org/10.4233/uuid:57f725e1-b3f3-455c-83ce-9156b2123c88

Important note

To cite this publication, please use the final published version (if applicable).

Please check the document version above.

Copyright

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons. Takedown policy

Please contact us and provide details if you believe this document breaches copyrights. We will remove access to the work immediately and investigate your claim.

This work is downloaded from Delft University of Technology.

(2)

Propositions

accompanying the dissertation

MEMS M

ICROPROPULSION

DESIGN,MODELING AND CONTROL OFVAPORIZINGLIQUIDMICROTHRUSTERS

by

Marsil de A

THAYDE

C

OSTA E

S

ILVA

1. Assuming that the vapor inside the vaporization chamber of Vaporizing Liquid Mi-crothrusters is at the saturation temperature is sufficient to model the dynamics of VLM systems.

2. Controlling the temperature of the thruster is crucial to a smooth operation of Va-porizing Liquid Microthruster systems.

3. A fuzzy system can be used to solve the control allocation problem for thrusters on-board of a spacecraft as long as its rules are carefully generated using a tradi-tional approach.

4. A chamber separate from the vaporization chamber of Vaporizing Liquid Micro-thruster systems is required to significantly increase the vapor temperature after boiling.

5. Interfacing is the biggest challenge when implementing micropropulsion systems based on Micro Electro-Mechanical Systems.

6. The use of silicon technology to produce micropropulsion systems is only justifi-able in order to integrate electronics.

7. Micropropulsion systems based on Micro Electro-Mechanical Systems are the best option for highly miniaturized spacecraft.

8. Science should not be based on political agendas but only on the need to increase and improve our knowledge.

9. Being capable of understanding everyone else, not only those close to us, is a nec-essary step for humans to actually evolve.

10. Human society is doomed to fail so long as it relies on the monopoly on violence as the only means to order.

These propositions are regarded as opposable and defendable, and have been approved as such by the promotor Prof. Dr. E. K. A. Gill.

(3)

Stellingen

behorende bij het proefschrift

MEMS M

ICROPROPULSION

DESIGN,MODELING AND CONTROL OFVAPORIZINGLIQUIDMICROTHRUSTERS

door

Marsil de A

THAYDE

C

OSTA E

S

ILVA

1. De aanname dat de waterdamp binnen de verdampingkamer van Vaporizing Li-quid Microthrusters op het kookpunt is, is voldoende om de dynamica van VLM-systemen te modelleren.

2. Het regelen van de temperatuur van de raketmotor is van cruciaal belang voor de soepele werking van Vaporizing Liquid Microthrusters.

3. Een fuzzy systeem kan worden gebruikt om het probleem van control allocation op te lossen, mits zijn regels zorgvuldig worden gegenereerd met een traditionele aanpak.

4. Een kamer die afgezonderd is van de verdampingkamer van Vaporizing Liquid Mi-crothrusters is nodig om de temperatuur van de waterdamp significant te verho-gen nadat het kookpunt bereikt is.

5. Het interfacen is de grootste uitdaging bij het implementeren van microvoorstu-wing systemen gebaseerd op Micro Electro-Mechanical Systems.

6. Het gebruik van silicium technologie om microvoorstuwing systemen te vervaar-digen is alleen gerechtvaardigd om elektronica te integreren.

7. Microvoorstuwingssystemen gebaseerd op Micro Electro-Mechanical Systems zijn de beste alternatief voor sterk geminiaturiseerde ruimtevaartuigen.

8. Wetenschap zou niet gebaseerd moeten zijn op politieke agenda’s maar uitsluitend op onze behoefte om de kennis te verbeteren en uit te breiden.

9. In staat zijn om iedereen te begrijpen, en niet alleen die die dicht bij huis zijn, is een noodzakelijke stap om de mensheid écht te evolueren.

10. De maatschappij is gedoemd zolang die vertrouwt op het geweldsmonopolie als enige middel om orde te scheppen.

Deze stellingen worden opponeerbaar en verdedigbaar geacht en zijn als zodanig goedgekeurd door de promotor Prof. Dr. E. K. A. Gill.

Cytaty

Powiązane dokumenty

The result of the present study shows that for maximum work output, thermal efficiency as well as total exergy destruction, extraction of combustible gases from the passage of

problem transcendencji to pytanie, czy świadomościowy podmiot poznania jest w stanie wykroczyć poza swą sferę immanentną lub, w innym ujęciu, poza własne stany i dotrzeć

W tej sytuacji pojawia się problem znajomości narodowych tańców polskich — a więc i podstaw stylu narodowego w muzyce polskiej — wśród współczesnej młodzieży.. Zagad­

Jest to dobry pomysł, gdyż znamy tak karykaturalne wstępy, jak na przykład ten z  Aptekarza z  getta krakowskiego Tomasza Bereź‑ nickiego: komiks otwiera

(2) In the alternative, in the event that the Court should answer the questions concerning the interpretation of the third paragraph of Article 267 TFEU to

With due consideration to results of computer code, some notes can pointed as follow : a) With due consideration to the distribution of the ratio of oxidizer to fuel flow rate

Conclusion: Antireflux surgery is required as a part of the treatment for Barrett’s esophagus, which prevents further dysplasia and development of esophageal cancer.. KEYWORDS:

Prowadzone w IMBiGS o/z w Katowicach badania odkamieniania urobku węglowego pokazały, że dla węgli o stosunkowo dużej zawartości siarki, zwłaszcza pirytowej, można