• Nie Znaleziono Wyników

Onderdelenmagazijnen in flexibele produktiesystemen (summary)

N/A
N/A
Protected

Academic year: 2021

Share "Onderdelenmagazijnen in flexibele produktiesystemen (summary)"

Copied!
1
0
0

Pełen tekst

(1)

Delft University of Technology

Faculty Mechanical, Maritime and Materials Engineering Transport Technology

M.G. de Leeuw Onderdelenmagazijnen in flexibele produktiesystemen. Masters thesis, Report TT.1203, Transport Engineering and Logistics.

In this report small parts handling and storage in Philips factory-warehouses are duscussed. In the report is shown wich handling- and storage systems are preferable, given the characterists of the goodsflow.

In recent years in Philips-factories mostly is chosen for mini-load-like systems or vertical storage systems. In this report is shown which (alternative) solutions or combinations could be employed.

Reports on Transport Engineering and Logistics (in Dutch)

Cytaty

Powiązane dokumenty

Use the global angular momentum balance to calculate the time evolution of angular velocity Ω(t) of a rotating lawn sprinkler after the water pressure is turned on.. An arm of a

The main advantages of lithium-ion batteries are high energy density, long life (determined 

$contrl scftyp=rhf runtyp=tdhfx nosym=1 ispher=0 $end $system mwords=1 $end.. $basis gbasis=n21 ngauss=3 $end $guess

Stack-losses of ammonia Y were measured in course of 21 days of operation of a plant for the oxidation of ammonia (NH3) to nitric acid (HNO 3 ).. Discuss the

Stack-losses of ammonia Y were measured in course of 21 days of operation of a plant for the oxidation of ammonia (NH3) to nitric acid (HNO 3 )... Discuss the obtained

After the determination of the most important parameters and possible storage solutions, the most dominant biomass types for both solid and liquid are determined, together with

To continue the works ordered by Health Minister on the 8 th of February 2005, a Group was set up to draw up a strategy for the development of a medical information system in

Where an answer is incorrect, some marks may be given for a correct method, provided this is shown by written working.. Answers must be written within the answer