Contents/Spis treści
2
0
0
Pełen tekst
(2)
Powiązane dokumenty
On the basis of the performed investigation it was found that the biggest influence on the nucleation temperature has the aluminium content (it decreases the nucleation
Based on these investigation the distribution of the powder particles in the surface layer of the aluminium-silicon-copper cast alloys was presented, it was also
As a result of the comparison of the corrosion loops width of the investigate alloys as well of the inclination angle and amplitude of the curve loops it can be
Magnesium alloys are subjected to heat treatment mostly for the purpose of improvement of their mechanical properties or as an intermediary operation, to prepare the alloy to
The results of the static tension test make it possible to determine and compare the mechanical and plastic properties of the examined magnesium cast alloys in
The result of the investigation show that the application of the mechanical alloying process for production Fe-Co-Ni-Nb-Si-B powder alloy enables to obtain
The results of the metallographic investigations performed on the optical microscope show that the ACAlSi9Cu and ACAlSi9Cu4 cast aluminium alloys are characterised by a
Obtained refinement of primary structure, which is important in point of view of next plastic deformation of continuous ingots, results from influence of
