CONSTRUCTION

1. Central unit 2. Dust container 3. EPA filter 4. Filter casing 5. Telescopic pipe 6. Crevice tip - long 7. Crevice tip - short 8. Electric brush

9. Replaceable Li-ion battery

10. Wall bracket with charger (cord length 1,5 m) 11. Tube for vacuuming the car

11

24 HOFFEN 8. USE

BEFORE THE FIRST START

All operations should be carried out gently so as not to damage the components.

Perform all operations with care, paying particular attention to the possibility of snapping your skin or fingers when mounting the unit.

Caution! When mounting and dismounting, be careful not to turn on the vacuum cleaner by accidentally pressing the on/off switch.

Unpack the device. Check whether any of the components are damaged. Place the vacuum cleaner on the floor.

ASSEMBLY AND DISASSEMBLY OF THE DEVICE COMPONENTS

Check that the dust container contains a filter. If not, place the filter in the dust container. Put the filter from the top of the dust container.

Attach the dust container with the filter fitted and the base of the vacuum cleaner by hooking on the knobs in both parts and pushing them together. You will hear a characteristic sound - click which means that the dust container and the base of the vacuum cleaner are connected.

Then connect the tube to the vacuum cleaner base, connect one end of the tube to the other end of the tube: the electro-brush or the long crevice tip and press down The long crevice tip can be fitted with a short crevice tip.

If in need, the device can be used without the telescopic pipe attached. An electro brush, long crevice tip or tube for vacuuming the car can be connected directly to the vacuum central unit.

The vacuum cleaner's elements are disassembled in the opposite way to their assembly, by pressing the appropriate assembly buttons to release the lock and pulling the elements to disconnect them. To remove the dust container from the base of the vacuum cleaner, press the lock button firmly and disconnect the components.

26 HOFFEN TUBE ADJUSTMENT

The vacuum cleaner tube has a half bend which allows vacuuming under furniture and in hard to reach places. To use this function, release the lock by pressing the button on the tube.

CHARGING

Wall bracket is to be mounted on the wall.

To prolong battery life avoid charging directly after complete discharge.

The appliance is only to be used with the provided power supply unit.

Make sure the device is switched off. Put the vacuum cleaner in the wall bracket by pressing the handle against the bracket until you hear characteristic click. Connect the power supply plug to the power outlet. The charging indicator lights will light up sequentially to indicate the status of charge When the battery is full, all three control lamps will be on lit up with continuous light. When the charging is complete, unplug the power cord from the charging base.

Charging parameters:

Charging temperature range - 0-40 ºC Charging voltage - 25.5 V (max 25.8 V) Charging current - 440 mA (max 1000 mA) SWITCHING THE DEVICE ON AND OFF

Make sure your hands are dry before operating the unit.

Do not expose the device to suction of water or conductive dust (toners from printers) or easily clumped (gypsum, cement, etc.).

Do not expose the unit to the suction of objects that may damage the dust container and thus the entire unit.

Do not vacuum materials such as tablecloths, curtains, drapes, etc. or use only low suction power.

Never stand or sit on the device.

Ensure that no children or animals are in the proximity of the device when it is used.

Make sure that there is a dust container and filters mounted in the vacuum cleaner.

Empty the dust container as soon as it is full. Do not leave it filled in the unit.

Clean the filter as soon as it gets dirty. It is best to clean it every time you empty the dust container. The filter must be replaced in case of very heavy soiling that cannot be cleaned.

If the pipe becomes clogged turn off the device at once.

After assembling the unit and selecting the appropriate brush, press the on/off trigger and start vacuuming. Once switched on, the device operates at low suction power. By pressing the MAX button once, the device switches on higher suction power. Pressing the MAX button again switches the device back into lower suction power mode. When finished, turn off the unit by pressing the on/off switch trigger.

28 HOFFEN

9.CLEANING AND MAINTENANCE CLEANING THE DEVICE

Cleaning may only be carried out when the vacuum cleaner is switched off and has cooled down and is not connected to the wall bracket.

Do not use any chemical, alkaline, abrasive or disinfecting agents for cleaning, as they might have a negative effect on the components.

The central part of the vacuum and its components may only be cleaned with a dry cloth or paper towel. In case of heavy soiling it is allowed to use a cloth slightly dampened with warm water and wrung out of its excess. Afterwards, wipe the cleaned area immediately with a dry cloth or paper towel and leave the device to dry.

EMPTYING, CLEANING THE DUST CONTAINER

Make sure the device is not charging or switched on. For more convenient operation, disconnect the pipe from the base of the vacuum cleaner. Subsequently disconnect the dust container from the vacuum cleaner base. Remove the filter from the dust container by pulling on the attached ribbon and then the filter housing by pulling on the metal holder under the filter. Empty the contents of the container, then insert the filter housing with the filter into it. Connect the dust container and other parts of the unit to the vacuum cleaner base.

CLEANING AND FILTER REPLACEMENT

Filter is a component designed to retain contaminants. After some time its filtration properties deteriorate significantly. We therefore recommend that you check and clean the filter at regular intervals. The filter can be washed in case of heavy dirt.

There is a recess in the filter housing, which must fit into the dust container.

Make sure the device is not charging or switched on. For more convenient operation, disconnect the pipe from the base of the vacuum cleaner. Subsequently disconnect the dust container from the vacuum cleaner base. Remove the filter from the dust container by pulling on the attached ribbon and then the filter housing by pulling on the metal holder under the filter. Empty the contents of the container and then clean the filter by peeling it off the dirt. The filter may be cleaned if needed. The filter housing can be rinsed gently and then wiped thoroughly with a dry cloth or paper towel and left to dry. After cleaning, install the filter housing and filter in the dust container.

New EPA filters available for purchase from the manufacturer.

Contact: +48 71 71 77 400 or pomoc@myphone.pl Dispose of used filters in accordance with local regulations.

30 HOFFEN CLEANING THE ELECTRIC BRUSH

Disconnect the electric brush from the vacuum cleaner pipe or base, depending on how it is installed. Access to the brush is located on the bottom of the electric brush. Turn the brush locking mechanism to the left, open the lock by lifting it and remove the brush. Clean the brush and place it back in the electric brush. Close the locking mechanism and turn the lock to the right.

10. PROBLEMS

If you have any problems with your device, please refer to the following tips.

I cannot switch the device on

Check if the battery has been mounted properly.

Check the battery charge level

Check whether the wall bracket or power cord are not damaged.

Check whether the electrical outlet is damaged - select another one.

Poor suction power

Check the fill level of the dust container.

Check the dirt level of the filter.

Check that the inlet or outlet openings are not covered.

Check that nothing is blocking the tips or telescopic tube.

There is an unpleasant odour coming out of the

The first time you start the machine, you may notice a smell that will disappear after a few minutes of operation.

If the smell emitted from the appliance resembles the smell of

device burning plastic, immediately disconnect the appliance from the power supply and set it aside in a place where it will not cause damage if ignited. Do not plug in the device again and contact the manufacturer's service department immediately.

Check to see if the reason is something that was sucked into the dust container by the vacuum cleaner. If so, empty the container.

If the filter is heavily soiled or the unit has been used in a room with strong odours or humidity, it can cause unpleasant odours.

If the odour persists after a few minutes of operation, it is recommended to replace the filter with new one.

There are

If the problem persists, contact the manufacturer's service department.

STORAGE OF EQUIPMENT

If you are not going to use the unit for a long time, after turning it off with the power button, rolling up the power cable, disassembling the components, cooling and cleaning, store it in a dry room away from heat and moisture sources. It is best to place the device in its original packaging, away from children and pets.

TRANSPORT OF THE DEVICE

It is recommended to transport the device in its original packaging. Do not expose the unit to excessive vibration or shock during transportation. When handling, only carry the unit after it has been switched off, holding it securely by the handle. Do not expose the device to heat or moisture.

12. WARRANTY AND SERVICE

The product is covered by a 2 year warranty from the date of sale of the product. The warranty does not cover the filter and filter housing - these are consumables. If you need warranty repair, please contact the manufacturer's hotline. The product returned for repair should be complete and preferably packed in its original packaging.

13. DECLARATION OF CONFORMITY WITH EUROPEAN STANDARDS

mPTech Ltd. hereby declares that the product complies with all relevant provisions of the so called the 'New Approach' Directive of the European Union.

11. STORAGE AND TRANSPORT

32 HOFFEN 14. MANUFACTURER

mPTech Sp. z o.o.

Nowogrodzka 31 00-511 Warsaw

Poland

Helpline: (+48 71) 71 77 400 Manufactured in China

Lot number: 202110