Ceiling-Mounted & Suspended Systems
Beam Clamp UC...
Ceiling-Mounted & Suspended Systems.
Head Plate PS
Head Plate Variable PSUN/PSUNO
Ceiling Bracket WPCB...
Head Plate PSC N
Bracket WZD...
Spacer BRP40 Hold Down Clamp
UDC
Base Plate PMMN Beam Clamp
UCM..
XIII
F
APPLICATION Suspending cable routes.
MATERIAL:
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 Available finishes:
F- steel, hot-dip galv.
to PN-EN ISO 1461:2011
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
MATERIAL:
Steel, hot-dip galv.
to PN-EN ISO 1461:2011 Available finishes:
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
Thickness mm
g
Catalogue CODE No.
WSV...
Safe Working Load Fmax[kN]1 pc.
Length kg mm
L
6 6 8
0.39 0.48 0.75 WSV100
WSV150 WSV200
0.60 0.45 0.30 10 10
1.26 1.55 WSV300
WSV400
0.40 0.25 115
165 215 315 415
712210 712215 712220
30 20 20 712230 712240
10 10 Qty
Bracket
Length mm
L
Catalogue CODE No.
70 120 170 220
0.13 0.18 0.22 0.25
720205 720210 720215 720220 WSS50
WSS100 WSS150 WSS200
WSS...
Safe Working Load Fmax[kN]
0.40 0.30 0.22 0.17
100 100 100 100 1 pc.
kg Qty
Bracket
WSV WSS
F
Thickn. (ga) ≠ [mm]: 0.7 1.0 1.2
1.5 2.02
XIII XIII
Width
a
mm
Catalogue CODE No.
90 140 190 240 340
0.13 0.15 0.20 0.25 0.40
730205 730210 730215 730220 730230 WSO50
WSO100 WSO150 WSO200 WSO300
WSO...
Safe Working Load Fmax[kN]
0.95 0.85 0.75 0.50 0.40
100 50 50 50 30 1 pc.
kg Qty
Ceiling Hanger
WSO
NOTE:
Load given for two-point mounting
F
Side Holder
Length
L
mm
Catalogue No.
32 42 52
0.08 0.09 0.10
730204 730104 730304 CODE
WC30 WC40 WC50
WC...
Safe Working Load Fmax[kN]
0.30 0.25 0.22
100 100 100 1 pc.
kg
Qty 102
88 78 Height mmH
WC
F
MATERIAL:
Steel, strip-galv.
acc. to the Sendzimir method to PN-EN 10346:2015-09 Available finishes:
F- steel galvanized using zinc flake coating PN-EN ISO 10683:2014-09
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
APPLICATION Suspending cable routes.
For mechanical properties of screws and anchors see Section XI page 15
60 0.03 100
WD...
Safe Working Load Fmax[kN]1 pc.
kg CatalogueNo.
Qty Width
mma
50 100
0.90 0.39
0.03 0.03
910000 940000
100 50 40
115 Height mmH
127 130
128 1.10 0.03 900000 100 CODE
WD50 WD100 WD40
WD60 0.55 920000
Hanger
WD
WD100
MATERIAL
Electro-galvanised wire (EG) Available finishes:
F- galvanized using zinc flake coating wire PN-EN ISO 10683:2014-09 E- stainless steel wire (SS)
L- powder coating in a full range of colours (PC) (info p. 4)
APPLICATION
Suspending cable routes and profiles.
Hanger WD40 fits to:
CW…40H35, 40H40, 40H47, 40H60, 40H80, CM…40H30, 40H40, 40H60, CM..40H80, CTM…40H40, 40H60, 40H80
Hanger Wd50 fits to:
CM…50H30, H50, CTM…50H50, H100, Hanger WD60 fits to KDS/KDSO60H60.
Hanger WD100 fits to CTMT100H100, KDS100H30, KDS/KDSO100H60 and KDS100H110
E-90
N
LUWD N
Stiffening Connector LUWD
Safe Working Load Fmax[kN]
CODE
1 pc.
kg CatalogueNo.
Qty
LUWD 0.55 0.03 920100 50
- Detailed info in section XIX
E-90
APPLICATION
Simplified montage of WD... hanger with the threaded rod to the ceiling. Together with WD...
hanger and PG... rod gives possibility of suspending cable trays, channels and wire mesh cable trays-stiffens sling based on WD... hanger
150
L 9x20 25 g
120
22
L 7x17
Ø9
H 90 ÷ 150
8.5x45
a 7x19 Ø9
H
L 45
15
9x18 11
Ø4
a
H
25
19 34
M8
2.5
Thickn. (ga) ≠ [mm]: 0.7 1.0 1.2
1.5 2.0For mechanical properties of screws and anchors see Section XI page 15
Length
L
mm
Catalogue No.
455 355 255 165
0.86 0.73 0.60 0.47
720340 720330 720320 720310
WFC/WFCO...
Safe Working Load Fmax[kN]
0.23 0.30 0.50
0.85 20
20 20 20 1 pc.
kg Qty
655 555
1.12 0.99
720360 720350 0.10
0.14 20
20
205 0.53 720315
CODE
WFC/WFCO400 WFC/WFCO300 WFC/WFCO200 WFC/WFCO100
WFC600 WFC500
WFC/WFCO150 0.70 20
WFC/WFCO
E-90
F
MATERIAL:
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 Available finishes:
F- steel galvanized using zinc flake coating PN-EN ISO 10683:2014-09
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
Spacer
CODE PD9
PD9
0.02 803200 100 8.5
mm
Dimension Catalogue 1 pc. No.
kg Qty
CODE PD11
PD11
0.03 803100 100 11
mm Dimension
Catalogue 1 pc. No.
kg Qty
APPLICATION
PD11 - for brackets WFC/WFCO, WFL, WFCS, WFLS
PD9 - for brackets WFMC, WFML Due to use of spacers, firm assembly of bracket is provided
PD9 PD11 E-90
- Detailed info in section XIX
E-90
Protective Cap
MATERIAL
Polyethylene. Standard colour: green to RAL 6029.
Available finishes:
white to RAL 9010. silver to RAL 9006.
APPLICATION
Protecting installers against cut from steel edges;
Improving overall product appearance
NOF...
NOFM
Catalogue CODE No.
900667
NOFM 100
Qty
Important! Only for: WFML and WFMC
NOF
Catalogue CODE No.
900666
NOF 100
Qty
Important! Only for:
WFL/WFLO and WFC/WFCO.
NOFM
NOF
XIII
PMM..
PM..
APPLICATION Suspending cable routes.
MATERIAL:
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 Available finishes:
F- steel, hot-dip galv.
to PN-EN ISO 1461:2011
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
18011×25
L 11-7×26
60
17
30 15 20
Ø11
30 12
10Ø8.5
Ø8-7x25
L
Ø8.5
Ø11
L Ø11-7x25
N N Bracket
WFMC
WFMC...
720341 720331 720321 720311
WFMC400 WFMC300 WFMC200 WFMC100
Length mm
L
Catalogue CODE No.
Safe Working Load Fmax[kN]1 pc.
kg
720316 WFMC150
143 197 243 337 443
0.35 0.30 0.25 0.20 0.15
20
20 20 20 20 0.26 20
0.30 0.33 0.42 0.48
720312 WFMC50 127 0.40 0.22
F
Qty
150
L 36
Ø8-6.5x25
Ø8
901140 901130 901120 901110
PMM400 PMM300 PMM200 PMM100
Length
L
mm
Catalogue CODE No.
PMM..
1 pc.
kg Qty
901115 PMM150
140 190 240 340 440
20
20 20 20 20 20 0.09
0.12 0.15 0.21 0.27
901105
PMM50 90 0.06
Length
L
mm
Catalogue No.
440 340 240 140
0.70 0.54 0.38 0.22
901440 901430 901420 901410
PM..
20
20 20 20 1 pc.
kg Qty
640 540
1.00 0.85
901460 901450 20
20
190 0.30 901415
CODE
PM400 PM300 PM200 PM100
PM600 PM500
PM150 20
Snap-in Support
4
XIII XIII
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 Available finishes:
F- steel, hot-dip galv.
to PN-EN ISO 1461:2011
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
APPLICATION Suspending cable routes
Central Hanger
Internal Hanger
97 WWK100
147 WWK150
197 WWK200
297 WWK300
731410 731415 731420 731430
28 0.10 100
28 0.14 100
28 0.17 50
28 0.25 50
30 30 30 30
0.60 0.45 0.40 0.25
WWK...
Width
a
mm Length
mm
L
Catalogue CODE No.
47 WWK50
1 pc.
Height kg mm
H
731405
28 0.07 100
30
Safe working max.
Fmax[kN]
0.80
WWK
Qty731505 731510 731515 731520 731530 Width
a
mm Length
mmL
Catalogue CODE No.
41 WKW50H42
91 WKW100H42
141 WKW150H42
191 WKW200H42
291 WKW300H42
1 pc.
Height kg mmH
0.07 100
0.10 100
0.14 100
0.17 50
0.25 50
Safe working max.
Fmax[kN]
0.80 0.60 0.45 0.40 0.25
WKW...H42
40 40 40 40 40 28 28 28 28 28
Qty
Application Example of Central Hanger WWK with Threaded Rod PG and Trapezoidal Ceiling Bracket WT80
KC...
Trapezoidal Decking Sheet
PWT WT120/WTO120 PGM8
WWK
Application Example of Cable Tray with Central Hanger WKW
WKW
731910 731915 731920 731930 91
WKW100H100 141 WKW150H100
191 WKW200H100
291 WKW300H100
0.16 30
0.20 30
0.23 30
0.31 30
0.60 0.45 0.40 0.25
WKW...H100
98 98 98 98 28 28 28 28
731810 731815 731820 731830 91
WKW100H80 141 WKW150H80
191 WKW200H80
291 WKW300H80
0.14 50
0.18 50
0.21 50
0.29 50
0.60 0.45 0.40 0.25
WKW...H80
78 78 78 78 28 28 28 28
731710 731715 731720 731730 91
WKW100H60 141 WKW150H60
191 WKW200H60
291 WKW300H60
0.12 100
0.16 50
0.19 50
0.27 50
0.60 0.45 0.40 0.25
WKW...H60
58 58 58 58 28 28 28 28
731605 731610 731615 731620 731630 41
WKW50H50 91 WKW100H50
141 WKW150H50
191 WKW200H50
291 WKW300H50
0.08 100
0.11 100
0.15 50
0.18 50
0.26 50
0.80 0.60 0.45 0.40 0.25
WKW...H50
48 48 48 48 48 28 28 28 28 28 Width
a
mm Length
mmL
Catalogue CODE No.
1 pc.
Height kg mmH
Safe working max.
Fmax[kN]
Qty
Width
a
mm Length
mmL
Catalogue CODE No.
1 pc.
Height kg mmH
Safe working max.
Fmax[kN] Qty
Width
a
mm Length
mmL
Catalogue CODE No.
1 pc.
kg Height
mmH
Safe working max.
Fmax[kN] Qty
Width
a
mm Length
mmL
Catalogue CODE No.
1 pc.
Height kg mmH
Safe working max.
Fmax[kN] Qty
≠ 2.0 mm
≠ 2.0 mm
≠ 2.0 mm
≠ 2.0 mm
≠ 2.0 mm
≠ 2.0 mm
For mechanical properties of screws and anchors see Section XI page 15
Thickn. (ga) ≠ [mm]: 2.0 2.5 3.0 4.0 5.0 6.0
USW9PGM8
KC...
WKW...
7
7x16
HH
a a
H
- Detailed info in section XIX
E-90
Thickn. (ga) ≠ [mm]: 2.0 2.5 3.0 4.0 5.0 6.0
Lock
OZK50 KCJ50H60
SROM6x30 MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 Available finishes:
F- steel galvanized using zinc flake coating PN-EN ISO 10683:2014-09
E- stainless steel (SS), grade 1.4301 (AISI304) - only for OZ/OZO
L- powder coating in a full range of colours (PC) (info p. 4)
OZK50
APPLICATION
Installing cable trays max. 50mm wide and max. 60mm high
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 Available finishes:
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
Application Examples of OZ/OZO, OZS/OZSO, OZM/OZMO - Wall-mount
- Wall-mount
- Fixing to Beam Clamp ZC - Fixing to threaded rod
SROM6x30
KCJ50H60 OZK50
Application Example of OZK50 Application Example of Cable Tray Hanger OZK50 Catalogue
CODE No.
POZ
POZ 0.02 50
1 pc.
kg 752416
Qty
≠ 1.5 mm
Cable Hanger E-90
CODE OZ/OZO
Catalogue No.
752400 50 0.38
Safe Working Load
Fmax[kN] 0.50 Dimension
mm 100 a
Dimension
mm 82 b
Dimension
mm 120 H
1 pc.
kg
OZ/OZO
Qty
≠ 1.5 mm
OZ/OZO
APPLICATION
Suspending electrical cables.
OZS/OZSO 52 38 81 0.20 0.12752500 100
OZS/OZSO
≠ 1.2 mmCODE Catalogue
No.
Safe Working Load
Fmax[kN] Dimension
mm a
Dimension
mm b
Dimension
mm H
1 pc.
kg Qty
OZM/OZMO 42 33 62 0.10 0.08753200 100
OZM/OZMO
≠ 0.7 mmCODE Catalogue
No.
Safe Working Load
Fmax[kN] Dimension
mma Dimension
mmb Dimension
mmH
1 pc.
kg Qty
OZS/OZSO
OZM/OZMO
E-90
E-90
For mechanical properties of screws and anchors see Section XI page 15
Lengthmm
L
Catalogue CODE No.
OZK50
Height mm
H
OZK50 94 0.06
Safe Working Load Fmax[kN]
55 100
1 pc.
kg 805300 0.12
Qty
≠ 1.5 mm
Cable Hanger
POZ
Barrier of Cable Clamp OZ/OZO
APPLICATION
Lengthwise division of Cable Hanger
Features & Benefits:
Barrier strip separates cables.
Montage example of Barrier Strip POZ and Barier of Cable Clamp OZ/OZO
N
XIII
35 L
H
H
Ø7
Ø7
b Ø20 a
b Ø16 a
Ø7
H
7
b a Ø10
H
Ø7 7
78
102
6
XIII XIII
APPLICATION
In combination with Cable Clamp UK/UKO for attaching electrical cables directly to the wall in the vertical plane or to the ceiling in the horizontal plane.
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 Available finishes:
F- steel, hot-dip galv.
to PN-EN ISO 1461:2011
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
SD...
NOTE:
Perforated rungs are subject to minimum order quantity
Rung SDC...
0.13 18
35
0.26 18
35
0.39 18
35
0.52 18
35
0.65 18
35
0.78 18
35
403810 403820 403830 403840 403850 403860
50 50 50 50 30 30 90
190 290 390 490 590 SDC100
SDC200 SDC300 SDC400 SDC500 SDC600
Length
L
mm
Catalogue CODE No.
Height
H
mm Width
a
mm 1 pc.
kg Qty
≠ 2.0 mm
UK2/UKO2
APPLICATION
Attaching cables to Cable Ladders DUP, DUD, DUC, DSP, DSC, DST.
MATERIAL
Steel galvanized using zinc flake coating PN-EN ISO 10683:2014-09
Available finishes:
E- stainless steel (SS), grade 1.4301 (AISI304)
UK1/UKO1
Cable Clamp
UK2/UKO2...
Dimension mm
D
CODE
UK2/UKO2/16-22 16-22 UK2/UKO2/22-28 22-28 UK2/UKO2/28-34 28-34 UK2/UKO2/34-40 34-40 UK2/UKO2/40-46 40-46 UK2/UKO2/46-52 46-52 UK2/UKO2/52-58 52-58
100 100 100 100 50 50 50 Qty Catalogue
No.
2 cables
0.07 0.09 0.10 0.12 0.15 0.16 0.18
403000 403100 403200 403300 403400 403500 403701 1 pc.
Height kg mm
H
80 90 105 118 132 149 158
UK2/UKO2/58-64 58-64 163 0.20 403600 50
UK1/UKO1...
CODE
Dimension mm
D
1 cable
Height mmH
1 pc.kg CatalogueNo.
Qty UK1/UKO1/16-22
UK1/UKO1/22-28 UK1/UKO1/28-34 UK1/UKO1/34-40 UK1/UKO1/40-46 UK1/UKO1/46-52 UK1/UKO1/52-58
16-22 22-28 28-34 34-40 40-46 46-52 52-58
57 61 71 78 86 97 100
0.05 0.06 0.07 0.08 0.10 0.11 0.12
402300 402400 402500 402600 402700 402800 402850
150 150 100 100 100 100 100 UK1/UKO1/58-64 58-64 103 0.13 402900 100 UK1/UKO1/64-70 64-70 116 0.14 404000 100
Application Examples of Rung SD in Combination with Cable Clamp UK/UKO and Anchor Bolt STR
E-90
- Detailed info in section XIX
E-90
For mechanical properties of screws and anchors see Section XI page 15
Optional application of Cable Protection Piece RO1.
Thickn. (ga) ≠ [mm]: 2.0 2.5 3.0 4.0 5.0 6.0
H
D
HD
16
23
L
32
18
16
9x15
Thickn. (ga) ≠ [mm]: 0.7 1.0 1.2
1.5 2.0 MATERIALStainless steel (SS), grade 1.4301 (AISI304).
Cable Clip
Application Example of UDF APPLICATION
Fastening cables directly on walls and to ceilings
UDF...
UDF...E UDF...
Dimension mm
D
Catalogue CODE No.
5
UDF...
6 7 8 9 10 12 14
15 16 18 20 22 25
405505 405506 405507 405508 405509 405510 405512 405514
405515 405516 405518 405520 405522 405525 26 28 32 33 35 36 40 42 UDF5
UDF6 UDF7 UDF8 UDF9 UDF10 UDF12 UDF14
UDF15 UDF16 UDF18 UDF20 UDF22 UDF25 UDF26 UDF28 UDF32 UDF33 UDF35 UDF36 UDF40 UDF42
405526 405528 405532 405533 405535 405536 405540 405542
5
UDF...E
6 7 8 9
10 12
14
15 16 18 20 22 25 26 28 32 33 35 36 40 42 UDF5E
UDF6E UDF7E UDF8E UDF9E UDF10E UDF12E UDF14E
UDF15E UDF16E UDF18E UDF20E UDF22E UDF25E UDF26E UDF28E UDF32E UDF33E UDF35E UDF36E UDF40E UDF42E
415505 415506 415507 415508 415509 415510 415512 415514
415515 415516 415518 415520 415522 415525 415526 415528 415532 415533 415535 415536 415540 415542
100 100 100 100 100 100 100 100
100 100 100 100 100 100 Qty
100 100 100 100 100 100 100 100
100 100 100 100 100 100 100 100
100 100 100 100 100 100 100 100 100 100 100 100 100 Dimension
D
mm Catalogue CODE No.
Qty
Dimension
D
mm Catalogue CODE No.
Qty
Dimension mm
D
Catalogue CODE No.
Qty
Cable Clip
UDF...
≠ 2.0 mm
≠ 2.0 mm
≠ 1.2 mm
≠ 1.2 mm
E-90 E-90
- Detailed info in section XIX
E-90
For mechanical properties of screws and anchors see Section XI page 15
MATERIAL
Steel galvanized using zinc flake coating PN-EN ISO 10683:2014-09
Available finishes:
L- powder coating in a full range of colours (PC) (info p. 4)
MATERIAL
Electro-galvanised steel (EGS).
Available finishes:
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
APPLICATION Fastening cables directly on walls and to ceilings
100
KSA...
Catalogue CODE No.
Dimension
D
мм KSA6
KSA8 KSA10 KSA12 KSA14 KSA16 KSA18 KSA20 KSA22 KSA24 KSA25 KSA26 KSA28 KSA32 KSA22 KSA24 KSA25 KSA26 KSA28 KSA32 KSA24 KSA26 KSA35 KSA37 KSA40 KSA42 KSA47 KSA50 KSA33 KSA55
805106 805108 805110 805112 805114 805116 805118
100 100 100 100 100 100 100 805120 100 805122 805124 805125 805126 805128 805132 805122 805124 805125 805126 805128
100 100 100 100 100 50
805148 805135 805136 805140 805142
50 50 50 50 50 50 805150 5-6 7-8 9-10 11-12 13-14 15-16 17-18 19-20 21-23 24-25 25-26 26-28 28-29 31-32 21-23 24-25 25-26 26-28 28-29 31-32 34-35 36-37 39-40 41-43 45-47 49-50
52-55 805155 50 Qty
Cable Clip
KSA E-90
Application Example of UDF, UEF and KSA
UDF SRO
UEF
KSA
XIII
D
Ø7
D
Ø7
M6 D
Thickn. (ga) ≠ [mm]: 0.7 1.0 1.2
1.5 2.08
XIII XIII
MATERIAL
Stainless steel (SS), grade 1.4301 (AISI304).
Cable Clip
APPLICATION Fastening cables directly on walls and to ceilings
D
UDFB...
UDFB...E UDFB...
Dimension
D
mm Catalogue CODE No.
5
UDFB...
6 7 8 9 10 12 14
15 16 18 20 22 25
425505 425506 425507 425508 425509 425510 425512 425514
425515 425516 425518 425520 425522 425525 26 28 32 33 35 36 40 42 UDFB5
UDFB6 UDFB7 UDFB8 UDFB9 UDFB10 UDFB12 UDFB14
UDFB15 UDFB16 UDFB18 UDFB20 UDFB22 UDFB25 UDFB26 UDFB28 UDFB32 UDFB33 UDFB35 UDFB36 UDFB40 UDFB42
425526 425528 425532 425533 425535 425536 425540 425542
5
UDFB...E
6 7 8 9 10 12 14
15 16 18 20 22 25 26 28 32 33 35 36 40 42 UDFB5E
UDFB6E UDFB7E UDFB8E UDFB9E UDFB10E UDFB12E UDFB14E
UDFB15E UDFB16E UDFB18E UDFB20E UDFB22E UDFB25E UDFB26E UDFB28E UDFB32E UDFB33E UDFB35E UDFB36E UDFB40E UDFB42E
100 100 100 100 100 100 100 100
100 100 100 100 100 100 Qty
100 100 100 100 100 100 100 100
100 100 100 100 100 100 100 100
100 100 100 100 100 100 100 100 100 100 100 100 100 100 Dimension
mm
D
Catalogue CODE No.
Qty
Dimension
D
mm Catalogue CODE No.
Qty
Dimension mm
D
Catalogue CODE No.
Qty
Cable Clip
D
UDFB...E
≠ 2.0 mm
≠ 2.0 mm
≠ 1.2 mm
≠ 1.2 mm
E-90
- Detailed info in section XIX
E-90
For mechanical properties of screws and anchors see Section XI page 15
MATERIAL
Steel galvanized using zinc flake coating PN-EN ISO 10683:2014-09
Available finishes:
L- powder coating in a full range of colours (PC) (info p. 4)
425605 425606 425607 425608 425609 425610 425612 425614
425615 425616 425618 425620 425622 425625 425626 425628 425632 425633 425635 425636 425640 425642
An example of UDFB application using the Gas Nail Gun OGB
3 1
Laying the clamp to the cable2
Shooting in the nail usingthe Gas Nail Gun
E-90
N
N
Thickn. (ga) ≠ [mm]: 0.7 1.0 1.2
1.5 2.0 MATERIALSteel galvanized using zinc flake coating PN-EN ISO 10683:2014-09
Available finishes:
L- powder coating in a full range of colours (PC) (info p. 4)
Cable Clip
Application Example of UEF APPLICATION
Fastening cables directly on walls and to ceilings
Cable Clip
UEF...
UEF...E
Dimension mm
D
Catalogue CODE No.
Qty
Dimension mm
D
Catalogue CODE No.
Qty
Dimension mm
D
Catalogue CODE No.
Qty
UEF...E UEF...
Dimension
D
mm Catalogue CODE No.
5
UEF...
6 7 8 9 10 12 14
15 16 18 20 22 25
405605 405606 405607 405608 405609 405610 405612 405614
405615 405616 405618 405620 405622 405625
100 100 100 100 100 100 100 100
100 100 100 100 100 100 Qty UEF5
UEF6 UEF7 UEF8 UEF9 UEF10 UEF12 UEF14
UEF15 UEF16 UEF18 UEF20 UEF22 UEF25 UEF26 UEF28 UEF32 UEF33 UEF35 UEF36 UEF40 UEF42
100 100 100 100 100 100 100 100 405626 405628 405632 405633 405635 405636 405640 405642 26 28 32 33 35 36 40 42
5
UEF...E
6 7 8 9 10 12 14
15 16 18 20 22 25
100 100 100 100 100 100 100 100
100 100 100 100 100 100 UEF5E
UEF6E UEF7E UEF8E UEF9E UEF10E UEF12E UEF14E
UEF15E UEF16E UEF18E UEF20E UEF22E UEF25E UEF26E UEF28E UEF32E UEF33E UEF35E UEF36E UEF40E UEF42E
26 28 32 33 35 36 40 42
100 100 100 100 100 100 100 100 415605 415606 415607 415608 415609 415610 415612 415614
415615 415616 415618 415620 415622 415625 415626 415628 415632 415633 415635 415636 415640 415642
≠ 2.0 mm
≠ 2.0 mm
≠ 1.2 mm
≠ 1.2 mm
E-90
E-90
SRO
UDF
UEF
KSA
- Detailed info in section XIX
E-90
For mechanical properties of screws and anchors see Section XI page 15
MATERIAL
Stainless steel (SS), grade 1.4301 (AISI304).
XIII
D
Ø7
D
Ø7
3 2
Shooting in the nail usingthe Gas Nail Gun
1
Laying the clamp to the cableThickn. (ga) ≠ [mm]: 0.7 1.0 1.2
1.5 2.010
XIII XIII
MATERIAL
Steel galvanized using zinc flake coating PN-EN ISO 10683:2014-09
Available finishes:
L- powder coating in a full range of colours (PC) (info p. 4)
Cable Clip
APPLICATION Fastening cables directly
on walls and to ceilings using the Gas Nail Gun D
UEFB...
Dimension mm
D
Catalogue CODE No.
Qty
UEFB...
Dimension
D
mm Catalogue CODE No.
5
UEFB...
6 7 8 9 10 12 14
15 16 18 20 22 25
100 100 100 100 100 100 100 100
100 100 100 100 100 100 Qty UEFB5
UEFB6 UEFB7 UEFB8 UEFB9 UEFB10 UEFB12 UEFB14
UEFB15 UEFB16 UEFB18 UEFB20 UEFB22 UEFB25 UEFB26 UEFB28 UEFB32 UEFB33 UEFB35 UEFB36 UEFB40 UEFB42
100 100 100 100 100 100 100 100 26
28 32 33 35 36 40 42
≠ 2.0 mm
≠ 1.2 mm
- Detailed info in section XIX
E-90
For mechanical properties of screws and anchors see Section XI page 15
Dimension mm
D
Catalogue CODE No.
Qty
Dimension mm
D
Catalogue CODE No.
Qty
UEFB...E
5
UEFB...E
6 7 8 9 10 12 14
15 16 18 20 22 25
100 100 100 100 100 100 100 100
100 100 100 100 100 100 UEFB5E
UEFB6E UEFB7E UEFB8E UEFB9E UEFB10E UEFB12E UEFB14E
UEFB15E UEFB16E UEFB18E UEFB20E UEFB22E UEFB25E UEFB26E UEFB28E UEFB32E UEFB33E UEFB35E UEFB36E UEFB40E UEFB42E
26 28 32 33 35 36 40 42
100 100 100 100 100 100 100 100
≠ 2.0 mm
≠ 1.2 mm
Cable Clip
UEFB...E
MATERIAL
Stainless steel (SS), grade 1.4301 (AISI304).
D
425705 425706 425707 425708 425709 425710 425712 425714
425715 425716 425718 425720 425722 425725 425726 425728 425732 425733 425735 425736 425740 425742
425805 425806 425807 425808 425809 425810 425812 425814
425815 425816 425818 425820 425822 425825 425826 425828 425832 425833 425835 425836 425840 425842
An example of UDFB application using the Gas Nail Gun OGB
E-90
E-90
N
N
PSW PS
PSN
Head Plate
Fixing Channel
APPLICATION Suspending cable routes.
APPLICATION
Used as a supporting element for a full range of brackets.
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 Available finishes:
F- steel, hot-dip galv.
to PN-EN ISO 1461:2011
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
Catalogue CODE No.
0.49 740410 PSN
PSN
50 1 pc.
kg
Qty Catalogue CODE No.
0.45 740310 PS
PS
50 1 pc.
kg
Qty
Catalogue CODE No.
740520 740530 740540 740550 740511 740512 740513
PSW...
PSW/02 PSW/03 PSW/04 PSW/05 PSW/1 PSW/2 PSW/3
Length mm
L
200 300 400 500 1000 2000 3000
0.23 0.33 0.43 0.53 1.06 2.01 3.10
30 30 30 30 8 8 8 1 pc.
kg Qty
Single-sided load distr. on ceiling bracket 200 300
0.20 0.15 Double-sided load distr. on ceiling bracket
F 800
F F 800
Length of ceiling bracket in [mm]
Safe Working Load
"F" in [kN]max.
Length of ceiling bracket in [mm]
Safe Working Load
"F" in [kN]max.
200 300 100
0.25
100
0.45 0.35 0.25 Safe Working Load "F”max. = cable weight + weight of cable tray + weight of ceiling bracket + weight of bracket without an average man's (an installer's) weight. In case of double-sided weight distribution the difference between the forces on both sides of the ceiling bracket must not exceed 50% value of its safe working load.
Arrangement of 'bean-shaped' (oval) openings in the head plate allows for installing the ceiling bracket in four different positions.
We have introduced the joint of the head plate with the arm by the use of riveting. Excluding welding of ceiling brackets from the whole production process positively influences the product general appearance.
Application Example of PSN
Head Plate PSN should be used in combination with Fixing Channel PSW, channels 40 and 41 mm wide, and Brackets WW.
Application Example of PS
Head Plate PS should be used in combination with Fixing Channel PSW.
Will not suit channel 40mm wide.
WW PS
PSW WW
WSZ WZS
PS
SNKM8x12
PSN
WW
CW...40H40
CW...40H22 PSW
For mechanical properties of screws and anchors see Section XI page 15
Thickn. (ga) ≠ [mm]: 2.0 2.5 3.0 4.0 5.0 6.0
MATERIALSteel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 Available finishes:
F- steel galvanized using zinc flake coating PN-EN ISO 10683:2014-09
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
XIII
12x25 9
70
L
32 9x23
1925 40 47 130 130
142
9x18 11x20
38 26 130 130
110
9x18 10x24 Ø8
12
XIII XIII
APPLICATION Suspending cable routes.
MATERIAL Steel, strip-galv.
acc. to the Sendzimir method to PN-EN 10346:2015-09 Available finishes:
F- steel galvanized using zinc flake coating PN-EN ISO 10683:2014-09
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
Fastening Bracket
PSUV
Fastening Bracket
Height mm
H
Catalogue CODE No.
102 0.53 740711
PSTV
PSTV
20 1 pc.
Safe Working kg Load Fmax[kN]
7.00
Qty
Height
H
mm
Catalogue CODE No.
127 0.39 740710 PST
PST
40 1 pc.
kg Qty
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 Available finishes:
F- steel galvanized using zinc flake coating PN-EN ISO 10683:2014-09
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
MATERIAL
Steel galvanized using zinc flake coating PN-EN ISO 10683:2014-09
Available finishes:
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
Safe Working Load Fmax[kN]
Height mm
H
Catalogue CODE No.
95 0.76 740611
PSUV
PSUV
20 1 pc.
kg Qty
Height mm
H
Catalogue CODE No.
120 0.41 740610 PSU
PSU
30 1 pc.
kg Qty
≠ 2.0 mm
≠ 3.0 mm
≠ 5.0 mm
≠ 5.0 mm
For mechanical properties of screws and anchors see Section XI page 15
Strong
7.00
F
PSTV
F
Strong
N
PST
MATERIAL
Steel galvanized using zinc flake coating
PN-EN ISO 10683:2014-09 Available finishes:
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
PSU
F
30x11
11 42
180
100
PSUN/PSUNO
Fastening Bracket
Catalogue CODE No.
0.45 741518 PSUN/PSUNO
PSUN/PSUNO
30 1 pc.
kg Qty
100 200 300 400
1.10 0.95 0.80 0.70 Length of ceiling
bracket in [mm]
Length of ceiling bracket in [mm]
Safe Working Load
"F" in [kN]max.
Safe Working Load
"F" in [kN]max.
100 200 300 400
1.65 1.50 1.30 1.10 Length of ceiling
bracket in [mm]
Safe Working Load
"F" in [kN]max.
100 200 300 400
1.10 0.95 0.80 0.70
800
L F 45°
F F
F
≠ 2.0 mm
E-90
WWS SMM10x20
PSRM10
CWC40H40 PSU
SRM8x25 WW
PZC100 WMC/WMCO
CWC40H40
NOW40x40 WWT
NO40x40 PSRM10
PSTV
SMM10x20
SRM10x30
PSUN/PSUNO
KC...
CWC40H40
SMM10x60
sm oo th ad
justm ent forcedangle
APPLICATION
Suspending cable routes. Benefits of using angle adjustable head plate are smooth angle adjustment or regulated with a screw.
Recommended is the use of channels:
CW...40H40, CW...40H35, i CM..41H41
Thickn. (ga) ≠ [mm]: 2.0 2.5 3.0 4.0 5.0 6.0 - Detailed info in section XIX
E-90
150120
H
42
13x24 113150
13x22
H
11x20
150 35
H
11x20 Ø11
20x11
11x26 42
150
H
NO40x40
Universal Holder
CODE UDU
UDU1
Catalogue No.
0.23 751626 10 1 pc.
kg Qty
UDU1
1
CODE UDU
UDU2
Catalogue No.
0.25 751627 10 1 pc.
kg Qty
2
N
UDU2
Cable Ladder Holder
CODE UDD
UDD
Catalogue No.
0.29 751625 10 1 pc.
kg
Qty
APPLICATION
Mounting of cable ladders and long span cable ladders to the I-beam
UDD
Strong
N
MATERIAL
Steel galvanized using zinc flake coating PN-EN ISO 10683:2014-09
NOTE
Cable Ladder Holder comes in set with SGFM10x40 screw.
Application example of UDD Application example of UDU...
XIII
M8x50 36
52 21
30 36
M8x50
30
52 21
21
86
58 Ø12
68
52
Thickn. (ga) ≠ [mm]: 2.0 2.5 3.0 4.0 5.0 6.0
≠ 4.0 APPLICATIONS
Mounting of long span cable trays and ladders H150, H160, H200 to the I-beam
APPLICATIONS
Mounting of long span cable trays and ladders H100, H110, H120 to the I-beam
Advantages:
-quick and easy montage of a long span cable tray or ladder to steel construction
-upper rotary part allows for symmetrical mounting of the cable clips (in one line)
Advantages:
-quick and easy montage of a long span cable tray or ladder to steel construction
-upper rotary part allows for symmetrical mounting of the cable clips (in one line)
F 400
F F400
Single-sided load distr. on ceiling bracket
100 200 300 400 500 600
5.50 4.60 3.80 3.20 2.80 2.50
Length of ceiling bracket in [mm]
Double-sided load distr. on ceiling bracket
100 200 300 400 500 600
7.80 7.20 6.80 6.10 5.70 5.40 Length of ceiling
bracket in [mm]
Safe Working Load
"F" in [kN]max.
Safe Working Load
"F" in [kN]max.
Safe Working Load "F”max. = cable weight + weight of cable tray + weight of ceiling bracket + weight of bracket without an average man's (an installer's) weight. In case of double-sided weight distribution the difference between the forces on both sides of the ceiling bracket must not exceed 50% value of its safe working load.
Application Example of PSBR...
Application Example of PSB Will suit Support Channels:
CMPC41H42 and CMPM41H42 (slides inside)
APPLICATION Suspending cable routes.
MATERIAL
Steel galvanized using zinc flake coating PN-EN ISO 10683:2014-09
Available finishes:
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
14
XIII XIII
Catalogue CODE No.
1.17 714181 PSBR
PSBR
1 pc.
kg
Single-sided load distr. on ceiling bracket
F 800
F F 800
100 200 300 400 500 600
1.80 1.60 1.20 1.00 0.90 0.80
Length of ceiling bracket in [mm]
Double-sided load distr. on ceiling bracket
100 200 300 400 500 600
2.60 2.30 2.00 1.80 1.60 1.40 Length of ceiling
bracket in [mm]
Safe Working Load
"F" in [kN]max.
Safe Working Load
"F" in [kN]max.
For mechanical properties of screws and anchors see Section XI page 15
Thickn. (ga) ≠ [mm]: 2.0 2.5 3.0 4.0 5.0 6.0
20 Qty
Head Plate
PSB
Head Plate with Barier Strip
PSBR
Features & Benefits:
-completes the system
-very durable head plate for new double channels 41H82 -integrated spacer in the base protects channel from strain and shortens assembly time
-bracket can be mounted to any side of a channel (even from the open side, what gives possibility of smooth regulation)
integrated barrier strip APPLICATION
Suspending cable routes.
Strong Strong
N
N
N
PSKK
APPLICATION Suspending cable routes.
Catalogue CODE No.
1.27 714124 PSKK
PSKK
10 1 pc.
kg
Qty Catalogue CODE No.
0.78 714123 PSB
PSB
10 1 pc.
kg Qty
Features & Benefits:
-completes the system
-very durable head plate for new double channels 41H42
-integrated spacer in the base protects channel from strain and shortens assembly time
-bracket can be mounted to any side of a channel (even from the open side, what gives possibility of smooth regulation)
Safe Working Load "F”max. = cable weight + weight of cable tray + weight of ceiling bracket + weight of bracket without an average man's (an installer's) weight. In case of double-sided weight distribution the difference between the forces on both sides of the ceiling bracket must not exceed 50% value of its safe working load.
Single-sided load distr. on ceiling bracket
F 800
F F 800
100 200 300 400 500 600
1.90 1.70 1.30 1.10 1.00 0.90
Length of ceiling bracket in [mm]
Double-sided load distr. on ceiling bracket
100 200 300 400 500 600
2.80 2.50 2.20 2.00 1.80 1.60 Length of ceiling
bracket in [mm]
Safe Working Load
"F" in [kN]max.
Safe Working Load
"F" in [kN]max.
Will suit Channels: CM...41H41 (slides inside) and CC55H50 (slides outside)
13x30 13-17x23
100 43 150
49
126 43
150 200
43
126
52
13-17x30 13x30
200
50
13x30 13x25
108 8042
50 42 Will suit Support Channels:
CMPC41H82 and CMPM41H82 (slides inside)
Safe Working Load "F”max. = cable weight + weight of cable tray + weight of ceiling bracket + weight of bracket without an average man's (an installer's) weight. In case of double-sided weight distribution the difference between the forces on both sides of the ceiling bracket must not exceed 50% value of its safe working load.
PM..
PMM..
PMVN
APPLICATION Suspending cable routes.
MATERIAL Steel, strip-galv.
acc. to the Sendzimir method to PN-EN 10346:2015-09 Available finishes:
F- steel galvanized using zinc flake coating PN-EN ISO 10683:2014-09
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
Catalogue CODE No.
0.16 740807 50 PMN
PMN
1 pc.
kg
0.24 740907 50 PMTN
PMTN
Qty
Catalogue CODE No.
0.14 741007 50 PMMN
PMMN
1 pc.
kg
0.21 741107 50 PMMTN
PMMTN
Qty
Safe Working Load Fmax[kN]
7.00
Catalogue CODE No.
0.48 741207 PMVN
PMVN
1 pc.
kg
30 Qty Catalogue CODE No.
1 pc.
kg Qty
Catalogue CODE No.
1 pc.
kg Qty
MATERIAL
Steel galvanized using zinc flake coating PN-EN ISO 10683:2014-09
Available finishes:
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
≠ 2.0 mm
≠ 2.0 mm
≠ 3.0 mm
≠ 3.0 mm
≠ 5.0 mm
For mechanical properties of screws and anchors see Section XI page 15
Head Plate
Catalogue CODE No.
0.80 751210 PSCN
PSCN
30 1 pc.
kg Qty
Single-sided load distr. on ceiling bracket
F 800
F F 800
100 200 300 400 500 600
1.80 1.60 1.20 1.00 0.90 0.80
Length of ceiling bracket in [mm]
Double-sided load distr. on ceiling bracket
100 200 300 400 500 600
2.60 2.30 2.00 1.80 1.60 1.40 Length of ceiling
bracket in [mm]
Safe Working Load
"F" in [kN]max.
Safe Working Load
"F" in [kN]max.
Will suit Support Channels: CW...40H40, CM...41H41,
CTM..40H40
PSCN
Catalogue CODE No.
0.90 751410 PSDN
PSDN
20 1 pc.
kg Qty
Single-sided load distr. on ceiling bracket
F 800
F F 800
100 200 300 400 500 600
1.90 1.70 1.30 1.10 1.00 0.90
Length of ceiling bracket in [mm]
Double-sided load distr. on ceiling bracket
100 200 300 400 500 600
2.80 2.50 2.20 2.00 1.80 1.60 Length of ceiling
bracket in [mm]
Safe Working Load
"F" in [kN]max.
Safe Working Load
"F" in [kN]max.
MATERIAL
Steel galvanized using zinc flake coating PN-EN ISO 10683:2014-09
Available finishes:
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
APPLICATION
Suspending heavy duty cable routes
Will suit Support Channels: CC55H50, CT55H50, CWC40H40, CWT40H40, CM..41H41, CTMT40H40, CTMC40H40
PSDN
PSRM10
SMM10x20
SGM6x12
WZS PSCN
CWC40H40 KG...
PSRM10x90
SGM10x20 PSDN
CT55H50
WWC SMM10x20 KSC...
Application Example of PSDN Application Example of PSCN
Thickn. (ga) ≠ [mm]: 2.0 2.5 3.0 4.0 5.0 6.0
XIII
42
9x18
65
38
35 116
35 22 42
65
116
42
87
92
50
11x22 126
F
Base Plate
F
F
150
11x20 13x30 80 150
40 48
42
40 48
150
11x20 13x30
80 200
42 104154
Safe Working Load "F”max. = cable weight + weight of cable tray + weight of ceiling bracket + weight of bracket without an average man's (an installer's) weight. In case of double-sided weight distribution the difference between the forces on both sides of the ceiling bracket must not exceed 50% value of its safe working load.
Safe Working Load "F”max. = cable weight + weight of cable tray + weight of ceiling bracket + weight of bracket without an average man's (an installer's) weight. In case of double-sided weight distribution the difference between the forces on both sides of the ceiling bracket must not exceed 50% value of its safe working load.
F 400
F F400
Single-sided load distr. on ceiling bracket
100 200 300 400 500 600
5.50 4.60 3.80 3.20 2.80 2.50
Length of ceiling bracket in [mm]
Double-sided load distr. on ceiling bracket
100 200 300 400 500 600
7.80 7.20 6.80 6.10 5.70 5.40 Length of ceiling
bracket in [mm]
Safe Working Load
"F" in [kN]max.
Safe Working Load
"F" in [kN]max.
Will suit Channels:
CC55H50, CT55H50, CWC40H40, CWT40H40, CM..41H41, CTMT40H40, CTMC40H40
PSRM10x90
SGM10x20 PSDDN
CT55H50
WPT...
Br55
SMM10x80
DSC...
Application Example of PSDDN
PSRM10x90
CE70H50
Br70
SMM12x100 SMM12x100 PSEN
WWV...
Application Example of PSEN Will suit Channels:
CE70H50, CT70H50 APPLICATION
Suspending heavy duty cable routes
MATERIAL
Steel galvanized using zinc flake coating PN-EN ISO 10683:2014-09
Available finishes:
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
16
XIII XIII
Head Plate
PSDDN
CatalogueCODE No.
0.90 751510 PSDDN
PSDDN
20 1 pc.
kg
Qty
Catalogue CODE No.
2.67 741620 PSEN
PSEN
10 1 pc.
kg Qty
Single-sided load distr. on ceiling bracket
F 800
F F 800
100 200 300 400 500 600
1.90 1.70 1.30 1.10 1.00 0.90
Length of ceiling bracket in [mm]
Double-sided load distr. on ceiling bracket
100 200 300 400 500 600
2.80 2.50 2.20 2.00 1.80 1.60 Length of ceiling
bracket in [mm]
Safe Working Load
"F" in [kN]max.
Safe Working Load
"F" in [kN]max.
For mechanical properties of screws and anchors see Section XI page 15 PSEN
Strong
Thickn. (ga) ≠ [mm]: 2.0 2.5 3.0 4.0 5.0 6.0
150
11x20 13x30
80 200
40
48
150
13x30 80 200
54 13x20
71 42
154154
Safe Working Load "F”max. = cable weight + weight of cable tray + weight of ceiling bracket + weight of bracket without an average man's (an installer's) weight. In case of double-sided weight distribution the difference between the forces on both sides of the ceiling bracket must not exceed 50% value of its safe working load.
Safe Working Load "F”max. = cable weight + weight of cable tray + weight of ceiling bracket + weight of bracket without an average man's (an installer's) weight. In case of double-sided weight distribution the difference between the forces on both sides of the ceiling bracket must not exceed 50% value of its safe working load.
Thickn. (ga) ≠ [mm]: 2.0 2.5 3.0 4.0 5.0 6.0
Head Plate
Will suit Support Channels:
CTMT40H80 and CMT40H80
APPLICATION
Suspending heavy duty cable routes
MATERIAL
Steel galvanized using zinc flake coating PN-EN ISO 10683:2014-09
Available finishes:
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
Catalogue CODE No.
2.67 741621 PSM
PSM
10 1 pc.
kg Qty
Catalogue CODE No.
0.98 741310 PSZN
PSZN
20 1 pc.
kg Qty
Single-sided load distr. on ceiling bracket
F 400
F F 400
Length of ceiling bracket in [mm]
Double-sided load distr. on ceiling bracket
100 200 300 400 500 600
7.80 7.20 6.80 6.10 5.70 5.40 Length of ceiling
bracket in [mm]
Safe Working Load
"F" in [kN]max.
Safe Working Load
"F" in [kN]max.
Single-sided load distr. on ceiling bracket
100 200 300 400 500 600
2.00 1.80 1.50 1.20 1.00 0.80 Double-sided load distr. on ceiling bracket
100 200 300 400 500 600
2.80 2.40 2.00 1.60 1.40 1.20
F 800
F F 800
Length of ceiling bracket in [mm]
Length of ceiling bracket in [mm]
Safe Working Load
"F" in [kN]max.
Safe Working Load
"F" in [kN]max.
PSZN
Will suit Z-Profile ZWC40H37
CODE
BR...
Height
H
mm 100
140 140 Width
a
mm 35
47 60 BR40
BR55 BR70
Catalogue No.
700100
700300 700400
50
50 50 Dimension
b
mm 15
15 15
Qty
Spacer
Spacer
CODE
BRP40
Height
H
mm 140 Width
a
mm 35 BRP40
Catalogue No.
700500 50 Dimension
b
mm 15
Qty
BRP40 BR...
We recommend using spacers BR… when screwing up Head plates with steel profiles. Spacer BR…
Protects against crushing channel or Z – profiles During installation.
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 Available finishes:
F- steel galvanized using zinc flake coating PN-EN ISO 10683:2014-09
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
APPLICATION
Used as spacer protecting against crushing steel profile during installation. Used with channel and Z-Profile
PSM
SMM10x120
CMT40H80
WMCT400
PSZN
SMM10x20
ZWC40H37
WSZ...
PSRM10x90
NO80x37 WPT...
For mechanical properties of screws and anchors see Section XI page 15
Strong
154
XIII PSM
110
12x30 13x30
80 200
b a
H
b a
H150
80 200
83 11x20
13x30
11x15
93 46
154
140 44
BR50 15 700210 50
Safe Working Load "F”max. = cable weight + weight of cable tray + weight of ceiling bracket + weight of bracket without an average man's (an installer's) weight. In case of double-sided weight distribution the difference between the forces on both sides of the ceiling bracket must not exceed 50% value of its safe working load.
Safe Working Load "F”max. = cable weight + weight of cable tray + weight of ceiling bracket + weight of bracket without an average man's (an installer's) weight. In case of double-sided weight distribution the difference between the forces on both sides of the ceiling bracket must not exceed 50% value of its safe working load.
MATERIAL
Polyethylene. Standard colour: green to RAL 6029.
Available finishes:
white to RAL 9010. silver to RAL 9006.
APPLICATION
Protecting installers against cut from steel edges; improving overall product appearance.
Ceiling Bracket
Single-sided load distr. on ceiling bracket
F 800
100 200 300
0.40 0.25 0.20 Length of ceiling
bracket in [mm]
Safe Working Load
"F" in [kN]max.
Length mm
L
Catalogue CODE No.
0.32 0.42 0.49 0.58 0.68 0.77 0.86 0.95 1.04
720420 720430 720440 720450 720460 720470 720480 720490 720411 WSP200
WSP300 WSP400 WSP500 WSP600 WSP700 WSP800 WSP900 WSP1000
WSP...
200 300 400 500 600 700 800 900 1000
20 20 20 20 20 8 8 8 8 1 pc.
kg Qty
Catalogue CODE No.
NO32x18N
760310 Height
H
mm 18 Width
a
mm 32
NO32x18N 100
Qty Safe Working Load "F”max. = cable weight + weight of cable tray + weight of ceiling bracket + weight of bracket without an average man's (an installer's) weight.
18
XIII XIII
NO...
For mechanical properties of screws and anchors see Section XI page 15
Catalogue CODE No.
NO40x40N
760510 Height mm
H
40 Width mm
a
40
NO40x40N 100
Qty
NO40x40N
WSP Przykład zastosowania WSP
WW
płynna regulacja WS
SMM10x20
WMC/WMCO WPCW/WPCO
PSRM10 Przykład zastosowania WPCW/WPCO
Length mm
L
Catalogue CODE No.
750620 750630 750640 750650 750660 750670 750680 750690 750611 WPCW/WPCO200
WPCW/WPCO300 WPCW/WPCO400 WPCW/WPCO500 WPCW/WPCO600 WPCW/WPCO700 WPCW/WPCO800 WPCW/WPCO900
215 315 415 515 615 700 800 900 1000 WPCW/WPCO1000
WPCW/WPCO...
0.90 1.10 1.30 1.47 1.67 1.86 2.10 2.25 2.45
20 20 10 10 10 10 10 10 10 1 pc.
kg Qty
Single-sided load distr. on ceiling bracket
100 200 300 400 500 600
1.80 1.60 1.20 1.00 0.90 0.80
Length of ceiling bracket in [mm]
Double-sided load distr. on ceiling bracket
100 200 300 400 500 600 2.60 2.30 2.00 1.80 1.60 1.40
F 800
F F 800
Length of ceiling bracket in [mm]
Safe Working Load
"F" in [kN]max.
Safe Working Load
"F" in [kN]max.
APPLICATION Suspending cable routes.
MATERIAL Steel, hot-dip galv.
to PN-EN ISO 1461:2011 Available finishes:
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
E-90
750515 1500
WPCW/WPCO1500 3.26 4
750511 1100
WPCW/WPCO1100 2.70 10
750512 1200
WPCW/WPCO1200 2.95 10
Ceiling Bracket
WPCW/WPCO
750613 3000
WPCW/WPCO3000 6.35 4
750641
WPCW4000 4000 8.25 4
750651 5000
WPCW5000 10.15 4
750661 6000
WPCW6000 12.10 4
750612 2000
WPCW/WPCO2000 4.90 4
Thickn. (ga) ≠ [mm]: 2.0 2.5 3.0 4.0 5.0 6.0 - Detailed info in section XIX
E-90
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 Available finishes:
F- steel, hot-dip galv.
to PN-EN ISO 1461:2011
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
13597
37
L
19 32
WSP
12x25 13x30
40
40
L
80 150
7 104
NO40x40
Protective Cap
Safe Working Load "F”max. = cable weight + weight of cable tray + weight of ceiling bracket + weight of bracket without an average man's (an installer's) weight. In case of double-sided weight distribution the difference between the forces on both sides of the ceiling bracket must not exceed 50% value of its safe working load.