Cariva™
łączniki i przyciski
Pak. Nr ref. Łączniki 10 AX* – 250 V~
Kremowy Biały
10 7737 01 7736 01 Łącznik jednobiegunowy 10 7737 06 7736 06 Łącznik schodowy 10 7737 07 7736 07 Łącznik krzyżowy 10 7737 05 7736 05 Łącznik świecznikowy 10 7737 08 7736 08 Łącznik schodowy podwójny 10 7737 02 7736 02 Łącznik dwubiegunowy 2P 10 7737 10 7736 10 Łącznik jednobiegunowy
ze wskaźnikiem przepływu prądu 10 7737 26 7736 26 Łącznik schodowy podświetlany 10 7737 09 7736 09 Łącznik jednobiegunowy IP44
Przyciski 6 A – 250 V~ 10 7737 11 7736 11 Przycisk jednobiegunowy 10 7737 13 7736 13 Przycisk podświetlany 250 V 10 7737 12 7736 12 Przycisk z uchwytem etykiety 12 V
Ściemniacze 230 V~ 1 7737 17 7736 17 Ściemniacz obrotowy.
Obciążenie:
• 40-300 W dla lamp żarowych i halogenowych,
• 40-300 VA dla lamp halogenowych ELV z transformatorami ferromagnetycznymi.
1 7737 15 7736 15 Ściemniacz przyciskowy.
Obciążenie:
• 40-600 W dla lamp żarowych i halogenowych,
• 40-600 VA dla lamp halogenowych ELV z transformatorami ferromagnetycznymi.
7736 01 + 7736 81 7737 05 + 7737 51
Cariva™
ściemniacze, łączniki hotelowe, sterowanie roletami
7737 17 + 7737 51 7736 04 + 7736 71
Pak. Nr ref. Łącznik hotelowy 10 A – 250 V~
Kremowy Biały
10 7737 48 7736 48 Łącznik do zarządzania energią w pokojach hotelowych przy zastosowaniu karty o maksymalnej szerokości 54 mm.
Produkt kompletny dostarczany z zieloną lampką 1 mA – nr ref. 7758 90.
Produkt nie może być montowany w ramce wielokrotnej.
Sterowanie roletami 10 A – 250 V~ 1 7737 04 7736 04 Łącznik sterowania roletami 1 7737 14 7736 14 Przycisk sterowania roletami
Gniazda wtyczkowe 16 A – 250 V~ Mechanizmy gniazd pojedynczych dostarczane z plakietką.
Wyposażone w metalowy uchwyt do montażu w puszce przy użyciu pazurków lub wkrętów.
Wyposażone w podwójne zaciski śrubowe.
10 7737 16 7736 16 Gniazdo pojedyncze 2P 10 7737 24 7736 24 Gniazdo pojedyncze 2P+Z 10 7737 25 7736 25 Gniazdo pojedyncze 2P+Z
z przesłoną styków
10 7737 28 7736 28 Gniazdo pojedyncze 2P+Z IP44 z przesłoną styków
Mechanizmy gniazd podwójnych dostarczane są z plakietką i ramką 5 7737 18 7736 18 Gniazdo podwójne 2 x 2P+Z
7736 24 + 7736 51 7737 28 + 7736 61
Mechanizmy wyposażone w metalowy uchwyt.
Montaż w puszce przy użyciu pazurków lub wkrętów.
7 737 00/01/02/04/05/06/07/08/09/10/11/12/13/14/26/56/57/58 7 738 00/01/02/04/05/06/07/08/09/10/11/12/13/14/26 7 739 00/01/02/04/05/06/07/08/09/10/11/12/13/14/26
Switches
Switch mechanisms with or without indicator. Supplied with rocker plate or cover plate. To be fitted with finishing plates.
Fixed using screws or claws
To be fitted with plates 1. USE
2. RANGE
2. RANGE (continued)
3. DIMENSIONS (mm)
7 737 12
CONTENTS Pages 1. Use . . . 1 2. Range . . . 1 3. Dimensions. . . 1-2 4. Positioning . . . 2 5. Connection. . . 2-3-4 6. Technical characteristics . . . 4 7. Cleaning . . . 4 8. Accessories . . . 4-5 9. Standards and approvals . . . 5
7 736 02 7 736 01
VERSIONS
Modular 7 736 xx 7 737 xx
Complete
Supplied with 1-gang plate 7 738 xx 7 739 xx SWITCHES - 16 AX - 250 V~
Description Type
reference White Ivory Weight
1-way switch 1E 7 736 00 7 737 00 61 g
SWITCHES - 10 AX - 250 V~
1-way switch 2-way switch
1-way - IP44 Intermediate switch
1 6
1 IP44 7
7 736 01 7 736 06
7 736 09 7 736 07
7 737 07 7 736 56 7 737 56 7 737 06
58 g 7 736 57 7 737 57 60 g
7 737 09 7 737 07
59 g 62 g
2-gang 1-way switch 2-gang 2-way switch
5 6/2
7 736 05
7 736 08
7 737 05
7 737 08
Double-pole switch 2 7 736 02 7 737 02 1-way switch with
indicator (230 V ~ lamp) Illuminated 2-way switch (230 V ~ lamp)
1T
6L
7 736 10
7 736 26
7 737 10
7 737 26 PUSH-BUTTONS - 10 A - 250 V~
Push-button 1P 7 736 11 7 737 11
Illuminated push-button
(230 V ~ lamp) 1PL 7 736 13 7 737 13 7 736 58 7 737 58 62 g
66 g
61 g
60 g
61 g
58 g
59 g
IP44
ROLLER SHUTTER CONTROLS 10 A / 10 AX - 250 V~
Description Type
reference White Ivory Weight Roller blind control
switch - 10 AX 1 + 6 7 736 04 7 737 04
Roller blind control
push-button - 10 A 1 + 6P 7 736 14 7 737 14 78 g
79 g
A B C D E F
A
A
E F
B
C D
Cat. Nos: 7 736 00/01/02/04/05/06/07/08/09/10/11/12/13/14/26/56/57/58 7 737 00/01/02/04/05/06/07/08/09/10/11/12/13/14/26/56/57/58 7 738 00/01/02/04/05/06/07/08/09/10/11/12/13/14/26 7 739 00/01/02/04/05/06/07/08/09/10/11/12/13/14/26
Cariva
TMSwitches
3. DIMENSIONS (continued)
4. POSITIONING
mounting boxes. For surface mounting installation, the appropriate Cariva switch mechanisms are mounted in commercially-available flush- surface mounting boxes must be used (7 736 98 and 7 737 98).
4.1 Screws
All Cariva switch mechanisms are equipped with long pitch screws. To ensure quick, safe mounting, the mechanisms have been equipped with mixed head screws (Pozidriv + slot for flat screwdriver).
Size of tools to be used on Cariva mechanismswith screws with mixed head and 3 mm diameter: PZ1 head or flat screwdriver 0,8 x 4.
To avoid any risk of damaging the screws by overtightening, take note of the maximum tightening torque in standard EN/IEC 60669-1.
When using electric screwdrivers, it is advisable to preset the tightening torque to 0,5/0,6 Nm.
4. POSITIONING (continued) 4.2 Fixing claws
When open, the claws extend dimensions from 50 to 71 mm.
5. CONNECTION 5.1 Connection terminals
All the switch and push-button mechanisms are equipped with automatic (screwless) terminals, for copper conductors, compliant with standard EN/IEC 60669-1. The stripped length required should be between 10 mm and 12 mm for all mechanisms.
A gauge marking on the front makes it easy to see the max. and min.
stripped lengths.
The double-blade connection spring is made up of 2 symmetrical parts, ensuring safe, simultaneous connection of two conductors with different diameters (between 1 mm2 and 2,5 mm2, except for catalogue numbers 7 73x 04/08/14 which are restricted to 1,5 mm2).
The terminals are also suitable for flexible wires (stranded cable) without needing any special preparation of the wires. Simply twist the strands by hand (no crimped terminations are needed). The flexible wire shall be inserted into the terminal by pressing its disconnecting button.
A safety stop ensures electrical separation between the operating device and the cable entry during the insertion of wires.
50 mm 71 mm
Note: Cat. Nos. 7 73x 04/08/14 are equipped with two types of terminal (screw/automatic).
A
B A
B
MAX
min
min MAX
A
A C
A B C
81,0 48,4 15,5
B
B
5. CONNECTION (continued) 5.2 Wiring diagrams (continued)
5.2 Wiring diagrams (continued)
L
N 230 V ~ L
N 230 V ~
L
N 230 V ~ L
N 230 V~
1-way switch Double-pole switch
2-gang 1-way switch 1-way switch with indicator
N L
230 V ~
N L
230 V ~ Illuminated 2-way switch
2-way switch
N L
230 V ~
N L
230 V ~ 2-gang 2-way switch
Intermediate switch
N L
230 V ~ Push-button
N L
230 V ~ Illuminated push-button
Cat. Nos: 7 736 00/01/02/04/05/06/07/08/09/10/11/12/13/14/26/56/57/58 7 737 00/01/02/04/05/06/07/08/09/10/11/12/13/14/26/56/57/58 7 738 00/01/02/04/05/06/07/08/09/10/11/12/13/14/26 7 739 00/01/02/04/05/06/07/08/09/10/11/12/13/14/26
Cariva
TMSwitches
6. TECHNICAL CHARACTERISTICS 6.1 Degree of protection
Protection against solid objects and liquids: IP 20 (complete mechanism), unless otherwise specified
Impact protection: IK 04 (0.5 J) 6.2 Material characteristics
Plates and rocker plates: Acrylonitrile butadiene styrene (ABS) Colours: White RAL 9003 and Ivory RAL 1013
Mechanisms:
Frame Zinc-plated steel
Cover Polycarbonate (PC)
Base UF resin
Rocker holder Polycarbonate (PC)
Claws Zinc-plated steel
Screws Zinc-plated steel
Automatic terminals CuZn 36/X12 CrNi 177
Contacts AgNi (cadmium-free)
Lamp-holder Polyamide (PA6) Self-extinguishing:
+ 850 °C / 30 s for insulating parts holding live parts in place + 650 °C / 30 s for the other insulation material components
6.3 Climatic characteristics Usage temperature: - 5 °C to + 40 ºC Storage temperature: - 25 ºC to + 40 ºC
(*)
Clean the surface with a cloth.
Do not use: acetone, tar-removing cleaning agents or trichloroethylene.
(*)
8.1 Lamps
Illuminated/indicator functions are supplied with a neon orange lamp for 230 V~.
Illuminated push-button with label-holder functions are supplied with an incandescent white lamp for 12 V~.
7. CLEANING
8. ACCESSORIES
Warning: Always test before using other special cleaning products.
5. CONNECTION (continued) 5.2 Wiring diagrams (continued)
N L
230 V ~ 12 V ~
Illuminated push-button with label-holder
Roller blind control switch
Roller blind control push-button
N L 230 V ~
M
Mechanism
Lamps Voltage Current Colour
Lamp-holder Replacement
7 73x 10 230 V~ 1 mA Red 0 712 98
7 73x 12 12 V~ 35 mA Ivory to order
7 73x 13 230 V~ 1 mA Red 0 712 98
7 73x 26 230 V~ 1 mA Red 0 712 98
230 V ~
M
N L
6.4 Marking
Frame Stamped markings
Base / rocker plate Pad printing
(*)
Lamp replacement
8.2 Rocker plates with pictogram
(*)
Compliant with installation and manufacturing standards.
See e-catalogue.
8. ACCESSORIES (continued)
9. STANDARDS AND APPROVALS
Description Cat. No. Pictogram
Rocker plate with pictogram (doorbell) 7 736 29 7 737 29 Rocker plate with pictogram (lamp) 7 736 30 7 737 30 Rocker plate with pictogram (stairs) 7 736 31 7 737 31