1. M. Blicharski: Wstęp do inżynierii materiałowej. Wydawnictwa Naukowo – Techniczne, Warszawa, 2001
2. Norma PN-EN 10020:2003
3. L. A. Dobrzański: Podstawy nauki o materiałach i metaloznawstwo. Wydawnictwa Naukowo – Techniczne, Warszawa, 2002
4. M. Blicharski: Stal. Wydawnictwa Naukowo – Techniczne, Warszawa, 2004
5. M. Przybyłowicz: Metaloznawstwo. Wydawnictwa Naukowo – Techniczne, Warszawa, 1999
6. O. D Sherby, T Oyama, D. W. Kum, B. Walser, J. Wadsworth: Ultrahigh carbon steel. Journal of Metals, June 1985, 50 – 56
7. J. Wadsworth, O. D. Sherby: The History of Ultrahigh Carbon Steels. D. R. Lesuer, C. K. Syn, O. D. Sherby (eds.): Termomechanical Processing and Mechanical Properties of Hypereutectoid Steels and Cast Irons. Warrendale, PA: TMS, 1997 8. O. D. Sherby, B. Walser, C. M. Young, and E. M. Cady: Superplastic UHCSs.
Scripta Metallurgica, 9, 1975, 569 – 574
9. D. R. Lesuer, C. K. Syn, A. Goldberg, J. Wadsworth and O. D. Sherby: The Case for Ultrahigh Carbon Steel as Structural Materials. The Journal of The Minerals, Metals & Materials Society, vol. 45, 1993, issue 8, 40 – 46
10. D. R. Lesuer, C. K. Syn, O. D. Sherby: Ultrahigh Carbon Steel for Automotive Application. SAE Technical Paper, #960314, 1996
11. J. Pacyna: Metaloznawstwo. Wybrane zagadnienia. Wydawnictwa AGH, Kraków 2005
12. G. Krauss: Steels: Structure, and Performance. ASM International, 2005
13. B. L. Bramfitt, A. O. Benscoter: Metallographer's guide: practices and procedures for irons and steels. ASM International, 2002
14. C. K. Syn, D. R. Lesuer, O. D. Sherby Influence of Microstructure on Tensile Properties of Spheroidized Ultrahigh-Carbon (1.8 Pct C) Steel. Metallurgical and Materials Transactions A, vol. 25A, July 1994, 1481 – 1493
15. T. Maki, T. Furuhara: Microstructure and Mechanical Properties of Ultra-fine (Ferrite + Cementite) Duplex Structure in High Carbon Steel. Materials Science Forum, vols. 426 – 432, 2003, 19 – 26
16. Y. Fan, J. Cao, W. Wang, Y. Liu: Microstructure and Mechanical Properties of a 1.6C (pct) Ultra-fine Grained Ultra-high Carbon Steel. Materials Science Forum, vol. 682, 2011, 131 – 137
127 17. E. M. Taleff, C. K. Syn, D. R. Lesuer, O. D. Sherby: Pearlite in Ultrahigh Carbon Steel: Heat Treatments and Mechanical Properties. Metallurgical and Materials Transactions A, vol. 27A, 1996, 111 – 118
18. Z. Zhang, K. Zhang, Y. Yue, N. Ma, Z. Xu: Microstructure and Mechanical Properties of Austempered Ultrahigh Carbon Steel 1.4% C. Materials Science Forum, vol. 682, 2011, 97 – 101
19. D. R. Lesuer, C. K. Syn, O. D. Sherby, D. K. Kim, W. D. Whittenberger: Mechanical Behavior of Ultrahigh Strength, Ultrahigh Carbon Steel Wire and Rod. D. R. Lesuer, C. K. Syn, O. D. Sherby (eds.): Termomechanical Processing and Mechanical Properties of Hypereutectoid Steels and Cast Irons. Warrendale, PA: TMS, 1997 20. H. R. Song, E. G. Kang, C. M. Bae, C. Y. Lee, D. L. Lee, W. J. Nam: The Effect of
a Cr Addition and Transformation Temperature on the Mechanical Properties of Cold Drawn Hyper-Eutectoid Steel Wire. Metals and Materials International, vol. 12, no. 3, 2006, 239 – 243
21. D. R. Lesuer, C. K. Syn, O. D. Sherby: Influence of Severe Plastic Deformation on the Structure and Properties of Ultrahigh-Carbon Steel Wire. T. C. Lowe, R. Z. Valiev (eds.), Investigations and Applications of Severe Plastic Deformation, Kluwer Academic Publishers, 2000
22. Y. J. Li, P. Choi, S. Goto, C. Borchers, D. Raabe, R. Kirchheim: Evolution of strength and microstructure during annealing of heavily cold-drawn 6.3 GPa hypereutectoid pearlitic steel wire. Acta Materialia, vol. 60, 2012, 4005 – 4016 23. T. G. Nieh, J. Wadsworth, O. D. Sherby: Superplasticity in metals and ceramics,
Cambridge University Press, 1997
24. S. Szczepanik, J. Sińczak: Determination of the Conditions for Heavy Deformations of Sintered Steel Containing 1.4%C, Metallurgy and Foundry Engineering, vol. 20, 1994, no. 4, 441 – 448
25. Metals Handbook: Forging and forming, ASM International, 9th Edition, vol. 14, 1993
26. O. A. Ruano, J. A. Jimenez, T. Oyama, O. D. Sherby: Enhancement of Superplastic Properties in Ultrahigh Carbon Steel through Silicon Addition, Steel Research, Int. vol. 80, 2009, no. 1, 78 – 83
27. C. K. Syn, D. R. Lesuer, A. Goldberg, H. C. Tsai, O. D. Sherby: Mechanical and Thermal Properties of Ultra-High Carbon Steel Containing Aluminum. Materials Science Forum, vols. 539-543, 2007, 4844 – 4849
28. R. C. Sharma: Principles of heat treatment of steels. New Age International (P) Ltd. Publisher, 2003
29. H. Chandler: Heat Treater's Guide: Practices and Procedures for Irons and Steels. ASM International, 1994
30. N. Gupta, S. K. Sen: Spheroidization treatment for steel. Defence Science Journal, vol. 56, 2006, no. 4, 665 – 676
128 31. K. Tsuzaki, E. Sato, S. Furimoto, T. Furuhara, T. Maki: Formation Of An (α+Θ) Microduplex Structure without Thermomechanical Processing in Superplastic Ultrahigh Carbon Steels. Scripta Materialia, vol. 40, 1999, no 6, 675 – 681
32. O. D. Sherby, T. Oyama, P. Alto, J. Wadsworth, M. Park: Divorced Eutectoid Transformation Process and Product of Ultrahigh Carbon Steel, Unite States Patent No: 4 448 613, 1984
33. J. D. Verhoeven, E. D. Gibson: The Divorced Eutectoid Transformation in Steel, Metallurgical and Materials Transactions A, Vol. 29A, 1998, 1183 – 1189
34. T. Furuhara, T. Yamaguchi, S. Furimoto, T. Maki: Formation of (Ferrite +Cementite) Microduplex Structure by Warm Deformation in High Carbon Steels. Materials Science Forum, vols. 539 – 543, 2007, 155 – 160
35. M. Blicharski: Odkształcenie i Pękanie. Wydawnictwo AGH, 2002
36. X. Zhaoa, T. F. Jing: Warm deformation behavior of medium carbon steel with different initial microstructures. Materials Science and Engineering A, vol. 543, 2012, 267– 270
37. J. Arruabarrena, B. Lopez, Jose M. Rodriguez-Ibabe: Influence of Prior Warm Deformation on Cementite Spheroidization Process in a Low-Alloy Medium Carbon Steel. Metallurgical And Materials Transactions A, vol. 45A, 2014, 1470 – 1484 38. W. Chen, L. Li, W. Yang, Z. Sun, J. He: Microstructure Evolution Of
Hypereutectoid Steels During Warm Deformation. Acta Metallurgica Sinica, vol. 45, 2009, no. 2, 151 – 155
39. L. Storojeva, D. Ponge, R. Kaspar, D. Raabe: Development of microstructure and texture of medium carbon steel during heavy warm deformation. Acta Materialia, vol. 52, 2004, 2209 – 2220
40. Q. Li, T. S. Wanga, T. F. Jing, Y. W. Gaob, J. F. Zhoub, J. K. Yua, H. B. Li: Warm deformation behavior of quenched medium carbon steel and its effect on microstructure and mechanical properties. Materials Science and Engineering A, vol. 515, 2009, 38 – 42
41. T. Wu, Y. Gao, M. Wang, X. Li, Y. Zhao, Q. Zou: Influence of Initial Microstructure on Warm Deformation Processability and Microstructure of an Ultrahigh Carbon Steel. Journal Of Iron And Steel Research, International, vol. 21, 2014, no 1, 52 – 59 42. T. Wu, Y. Gao, M. Wang, X. Li, Y. Zhao, Q. Zou: Effects of Plastic Warm Deformation on Cementite Spheroidization of a Eutectoid Steel. Journal of Iron and Steel Research, International. vol. 19, 2012, no. 8, 60 – 66
43. T. Furuhara, B. Poorganji: Formation of Ultrafine Grained Ferrite + Cementite Duplex Structure by Warm Deformation. Y. Weng et al. (eds.), Advanced Steels, DOI: 10.1007/978-3-642-17665-4_49, Springer-Verlag Berlin Heidelberg and Metallurgical Industry Press 2011, 495 – 500
44. H. Zhang, B. Bai, D. Raabe: Superplastic martensitic Mn–Si–Cr–C steel with 900% elongation. Acta Materialia, vol. 59, 2011, 5787 – 5802
129 45. U. H. Lee, N. Kamikawa, G. Miyamoto, T. Furuhara: Continuous dynamic recrystallization during warm deformation of tempered lath martensite in a medium carbon steel. Key Engineering Materials, vol. 508, 2012, 124 – 127
46. B. Poorganji, G. Miyamoto, T. Makib, T. Furuhara: Formation of ultrafine grained ferrite by warm deformation of lath martensite in low-alloy steels with different carbon content. Scripta Materialia, vol. 59, 2008, 279 – 281
47. P. Nikiel: Wpływ obróbki cieplno-plastycznej na mikrostrukturę spiekanej stali Fe 0,85Mo-0,65Si-1,4C. Rudy i Metale Nieżelazne, R58, 2013, Nr 11, 638 – 643 48. L. Li, W. Chen, W. Yang, Z. Sun: Mechanical Properties of Hypereutectoid Steel
with Microduplex (α+θ) Structure Formed by Hot Deformation of Undercooled Austenite. Materials Science Forum, vols. 654-656, 2010, 246 – 249
49. S. L. Zhang, X. J. Suna, H. Dong: Effect of deformation on the evolution of spheroidization for the ultra high carbon steel. Materials Science and Engineering A, vol. 432, 2006, 324 – 332
50. K. Przybyłowicz: Strukturalne aspekty odkształcania metali. WNT Warszawa, 2002 51. H. J. Frost, M. F. Ashby: Deformation-Mechanism Maps for Pure Iron, Two
Austenitic Stainless Steels, and a Low-Alloy Ferritic Steel. R. I. Jaffee et al. (eds.), Fundamental Aspects of Structural Alloy Design. Plenum Press, New York, 1977 52. L. Li, W. Yang, Z. Sun: Microstructure Evolution of a Pearlitic Steel during Hot
Deformation of Undercooled Austenite and Subsequent Annealing. Metallurgical and Materials Transactions A, vol. 39A, March 2008, 624 – 635
53. Y. Feng, S. Q. Yuan, M. Song: Microstructure Evolution of Undercooled Austenite during Deformation for Medium-Carbon Si-Mn Steel. Materials Science Forum, vols. 704-705, 2012, 903 –906
54. T. Furuhara, E. Sato, T. Mizoguchi, S. Furimoto, T. Maki: Grain Boundary Character and Superplasticity of Fine-Grained Ultra-High Carbon Steel. Metals Transactions, vol. 43, 2002, no. 10, 2455 – 2462
55. M. Caruso, S. Godet: Microstructural evolution during spheroidization annealing of eutectoid steel: effect of interlamellar spacing and cold working. Advanced Materials Research, vols. 89 – 91, 2010, 79 – 84
56. T. K. Ha, C. H. Lee, K. S. Kim: Spheroidization Behavior of Cementite in a High Carbon Steel. Materials Science Forum, vols. 654 – 656, 2010, 150 – 153
57. H. Halfa: Recent Trends in Producing Ultrafine Grained Steels. Journal of Minerals and Materials Characterization and Engineering, vol. 2, 2014, no. 5, 428 – 469
58. Y. G. Ko, B. W. Lee, J. S. Lee, D. Y. Choi, D. H. Shin: Spheroidization Behaviour of 1.0% Carbon Steel Processed by Equal Channel Angular Extrusion and Annealing. Materials Science and Technology, vol. 28, 2012, no. 1, 116 – 119
130 59. Y. Xiong, T. He, Z. Guo, H. He, F. Ren, A. A. Volinsky: Mechanical properties and fracture characteristics of high carbon steel after equal channel angular pressing. Materials Science & Engineering A, vol. 563, 2013, 163 – 167
60. T. Hea, Y. Xionga, F. Ren, Z. Guoa, A. A. Volinsky: Microstructure of Ultra-Fine-Grained high carbon steel prepared by equal channel angular pressing. Materials Science and Engineering A, vol. 535, 2012, 306 – 310
61. A. A. S. Abosbaia: Design And Processing Low Alloy High Carbon Steel by Powder Metallurgy. 2010, University of Bradford, praca doktorska
62. S. C. Mitchell, M. Youseffi, A. A. S. Abosbaia, J. Ernest: Processing and Heat Treatment of High Carbon Liquid Phase Sintering Steels. Powder Metallurgy Progress, vol. 8, 2008, no 2, 91 – 100
63. A. A. S. Abosbaia, S. C. Mitchell, M. Youseffi, A. S. Wronski: Liquid phase sintering, heat treatment and properties of ultrahigh carbon steels, Powder Metallurgy, vol. 54, 2011, no 5, 592-598.
64. S. Szczepanik, S. C. Mitchell, A. A. S. Abosbaia, A. S. Wronski: Warm Forging of Spheroidised Ultrahigh Carbon Steel. Powder Metallurgy Progress, vol. 10, 2010, no 1, 59 – 65
65. S. Szczepanik, S. C. Mitchell, A. S. Wronski, A. A. S. Abosbaia, P. Nikiel, J. Krawiarz: Microstructure evolution in fully dense warm forged sintered ultrahigh carbon steel. Powder Metallurgy Progress, vol. 11, 2011, no. 1–2, 78 – 84
66. http://tu-freiberg.de/fakult5/imf (20.01.2014)
67. B. D. Cullity: Elements of X-ray Diffraction. Addison – Wesley Publishing Company, Inc., Reading, Massachusetts: Addison-Wesley, 1956
68. S. J. Skrzypek, M. Witkowska, J. Kowalska, K. Chruściel: Zastosowanie nieniszczących dyfrakcyjnych metod rentgenowskich do charakteryzowania stanu struktury materiałów. Hutnik – Wiadomości Hutnicze, vol. 79, 2012, 238 – 246 69. J. Hedworth, M. J. Stowell: The Measurement of Strain-Rate Sensitivity in
Superplastic Alloys. Journal of Materials Science, 6, 1971, 1061 – 1069
70. M. W. Grabski: Nadplastyczność strukturalna metali. Wydawnictwo Śląsk, Katowice, 1973