Wroclaw University of Technology
Centre of Advanced Materials and N anotechnology
Materials Science-Poland
Vol. 28
Contents of Volume 28
Author Index
Key Word Index
•
•
Oficyna Wydawnicza Politechniki Wrodawskiej
Printed in Poland
©Copyright by Oficyna Wydawnicza Politechniki Wroclawskiej, Wroclaw 2011
Contents of Volume 28
No.l
H. Eslami, M. Solati-Hasbjin, M. Tahriri, F. Bakhshi, Synthesis and characterization ofnanocrys-talline hydroxyapatite obtained by the wet chemical technique... 5 Q. -H. Chen, W.-J. Wang, W.-G. Zhang, Structure and optical properties of(Al'l.r)/Al203 ethanol
colloids... 15 T. Zaremba, D. Witkowska, Methods of manufacturing of potassium titanate fibres and whiskers.
Areview... 25 D. W. Zhou, J.S. Liu, J. Zhang, Z.G. Huang, P. Peng, Electronic mechanism of dehydrogenation
of the Mg-Ge mixture during milling under hydrogen... 43
N. Suresh, S. Venkateswaran, S. Seetharamu, Influence of cenospheres of fly ash on the
mechani-cal properties and wear of permanent moulded eutectic Al-Si alloys... 55
W.Z. Nie, J. Li, X.H. Sheng, Tribological properties of oxidation modified carbon fibre -reinforced polyamide 6 composites... 67
L. Z. Pei, H.S. Zhao, W. Tan, H.Y. Yu, Q.-F. Zhang, Fabrication of core-shell Ge-Ge02
nanon-eedles... 77
S. Vatansever, F. OksU.Zomer, S. Naci Koc, M. Somer, H. Deligoz, M. A. Gurkaynak, Fabrication
of yttria stabilized zirconia nanoparticles by the reverse microemulsion method for SOFC ap-plications . ... ... ... ... .... ... ... ... ... ... 85
N. Dukstiene, L. Tatariskinaite, M. Andrulevicius, Characterization of electrochemically
depos-ited thin Mo-0-C-Se film layers... 93
C. Ludwig, M.F. Beug, K.-H. Kusters, Advances in flash memory devices... 105
K. Henkel, B. Seime, I. Paloumpa, K. MUller, D. Schmeisser, Optimization of MFIS structures
containing poly(vinylidene-fluoride trifluoroethylene) for non-volatile memory applications.... 117
V. Tyrpek, J. Poltierova-Vejpravova, J. Plocek, D. Niznanslcy, Preparation and characterization of
Si02 rnicrospheres doped with CoFe204 nanocrystals... 129
K. Dehghani, A. Jafari, Finite element stress analysis offorging dies to improve their fatigue life.. 139
C. Wang, Z. Chen, Y. He, L. Li, D. Zhang, Raman scattering ofZnO films prepared by the laser molecular beam epitaxy... 153
R. Sitek, J. Kaminski, P. Sallot, K.J. Kurzydlowski, Structure and properties of iron aluminide
layers fabricated by the chemical vapour deposition on 316L steel... 163
M.K. Halimah, W.M. Daud, H.A. A. Sidek, A.W. Zaidan, A.S. Zainal, Optical properties of
ternary tellurite glasses... 173
L. -P. Li, H.-Y. Zhang, J.-S. Pang, J. Lin, Fabrication and performance of carbon coated copper
nanoparticles.. ... ... ... ... ... ... ... ... ... ... .... ... ... ... ... .... 181
R. I. Zhao, Y. Ma, J. Zhang, F. Li, W. Liu, Q. Cui, Nitrogen doped carbon nanotubes and curved
lamellas produced via pyrolysis of melamine by direct current arc discharge... 189
D. Pathak, R.K. Bedi, D. Kaur, Characterization oflaser ablated AginSe2 films... 199
B. Wang, Y. Guo, G. Hu, On the design of biodegradable hydrogels both thermosensitive and pH
sensitive... 207
M. Banski, A. Podhorodecki, J. Misiewicz, Influence of sol-gel matrices on the optical excitation
of europium ions... 217
D. W. Zhou, J.S. Liu, S.H. Xu, G.Y. Chen, First principles study on the improved
4 Contents of Volume 28
I. S. El-Hallag, Characterization of electrodeposited nanostructured macroporous cobalt films using polystyrene sphere templates .. ... ... ... .. . ... ... ... ... 245 A. Chorfa, M. Hamidouche, M.A. Madjoubi, F. Petit, Mechanical behaviour of glass during
cyclic instrumented indentation... 255 S. Sen, P. Sahu, K. Prasad, A novel technique for the synthesis ofCaCu3Ti4012 ceramics... 265 M. Jiang, X. Liu, H. Wang, J. Xu, Growth orientation transition and metal-like conductivity ofTi, Al
eo-doped ZnO films... 273 S. Rani, P.K. Shishodia, R.M. Mehra, Enhancement of photovoltaic performance of quasi-solid
state dye sensitized solar cell \vith dispersion of a hole conducting agent... 281 K. Baltakys, E. Prichockiene, Influence of CaO reactivity on the formation of low-base calcium
silicate hydrates... 295 S. Bindra Narang, S. Bahel, Influence of frequency variations on the dielectric properties of Sm
doped Ba4L~.33 Ti 18054 dielectric ceramics at various temperatures... 305 B. K. Sharma, G. Misra, S.C. Goyal, Quantum computations for temperature variation of
refrac-tive indices of covalent semiconductors... 3 13 K. Prasad, S. Bhagat, K. Amarnath, S.N. Choudhary, K.L. Yadav, Electrical conduction in
Ba(Bio5Nb05)03 ceramics. Impedance spectroscopy analysis... 317 G. Z. Shen, G.S. Cheng, Y. Cao, Z. Xu, Preparation and microwave absorption of M type ferrite
nanoparticle composites... 327 B. B. Jha, B.K. Mishra, B. Satpati, S.N. Ojha, Effect of thermal ageing on the evolution of
micro-structure and degradation of hardness of 2.25Cr-l Mo steel... 3 35 S. Boucetta, T. Chihi, B. Ghebouli, M. Fatrni, First-principles study of the elastic and mechanical
properties ofNi3Al under high pressure... 34 7 J. Zhang, Y.N. Huang, C. G. Long, D.W. Zhou, J.S. Liu, Density functional study of Mg2FeH6
complex hydride... 357
No.2
A. E. Kandjani, P. Salehpoor, M. F. Tabriz, N. A. Arefian, M. R. Vaezi, Synthesis ofnano-Sn02 and neural network simulation of its photocatalytic properties... 377 E. Rusmski, P. Moczko, A combined numerical-experimental method for determining the spatial
distribution of a residual stress in a notch... 393 M. R. Akbarpour, F. Nematzadeh, S. E. Hasemi Amiri, H. Rezaii, Effect of long duration
inter-critical heat treatment on the mechanical properties of AISI 4340 steel... 40 I M. Ardestani, H. Arabi, H. Razavizadeh, H. R. Rezaie, H. Mehtjoo, Synthesis of WC-20 wt. %
Cu composite powders by eo-precipitation and carburization processes... 413 M. Golmohammad, Z. A. Nemati, M. A. Faghihi Sani, Synthesis and characterization of
nano-crystalline barium strontium titanate ... .. ... ... ... ... .. ... ... ... 421 S. Ghosh, S. Dasgupta, Synthesis, characterization and properties of nanocrystalline perovskite
cathode materials... 427 K. K. Kasem- D. Hanninger, A. Croxford, F. Phetteplace, Electrochemical studies on
metal-hexacyanocobaltate(III) thin solid films in aqueous electrolytes... 439 L. Marcinauskas, P. Valatkevicius, The effect of plasma torch power on the microstructure and
phase composition of a lumina coatings... 451 S. K. Durrani, M. A. Hussain, S. Z. Hussain, J. Akhtar, A. Saeed, N. Hussain, N. Ahmed,
Fabri-cation of magnesium aluminum silicate glass ceramics by sintering route... 459 Y. Wang, L. Chen, H. Yang, Q. Guo, W. Zhou, M. Tao, Large-area self assembled monolayers of
Contents of Volume 28 5 Y. Wen, H. Li, G. Peng, Y. Yang, L. Liu, HRTEM nanostructural evolution of onion-like spheres
in polyacrylonitrile fibres during stabilization and carbonization... 479 A. K. Srivastava, B. C. Yadav, Humidity sensing properties ofTi02-Sb205 nanocomposite... 491
X. F. Lin, R. M. Zhou, J. Q. Zhang, X. H. Sheng, Preparation and photocatalytic activity ofCu20 nanoparticles. ... ... ... ... ... ... ... ... ... ... .. ... ... ... ... ... .. . ... ... .. ... 503 A. Kathalingam, N. Ambika, M. R. Kim, J. Elanchezhiyan, Y. S. Chae, J. K. Rhee, Chemical bath
deposition and characterization ofnanocrystalline ZnO thin films... 513 C. K. Kajdas, A. Kulczycki, K. J. Kurzydlowski, G. J. Molina, Activation energy oftribochemical
and heterogeneous catalytic reactions... 523 J. Qi, G. Ning, Y. Zhao, M. Tian, Y. Xu, H. Hai, Synthesis and characterization ofV203
micro-crystal particles controlled by thermodynamic parameters... 535 K. Faghihi, M. Hajibeygi, New flame-retardant and optically active poly(amide-imide)s based on
N-trimellitylimido-L-amino acid and phosphine oxide moiety in the main chain: synthesis and characterization ... ... .... .... ... ... ... ... ... ... ... .... .... ... 545 A. Phuruangrat, T. Thongtem, S.I. Thongtem, Synthesis of nanocrystalline metal molybdates
using cyclic microwave radiation ... ... .. ... ... .... ... ... ... ... ... . ... .. 557 A. Abbasi, A. Reza Mahjoub, A. R. Badiei, A novel highly acidic sulfonic functionalized SBA-1
cubic mesoporous catalyst and its application in the esterification of palmitic acid... 565 B. Zurowska, A. Bialoiiska, A. Kotyiiski, J. Ochocki, Crystal structure and spectroscopic
proper-ties of [Zn(2-qmpe)Cl2] compounds containing a diethyl(quinolin-2-ylmethyl)phosphonate
li-gand (2-qmpe) ... 573 S. Balaji, S. Shanmugan, D. Mutharasu, K. Ramanathan, Structural, morphological and
electro-chemical characterization of electron beam deposited Li l+xMn204 (x = 0, 0.05) thin films... 583
G. Z. M a, D. Chen, Z. H. Chen, J. W. Liu, W. Li, The effect of cryogenic treatment on the micro-structure and mechanical properties ofCu46Zr4t;Al8 bulk metallic glass matrix composites... 595
No.3
M. Racuciu, D.E. Creangii, A. Airinei, D. Chicea, V. Bii.descu, Synthesis and properties of mag-netic nanoparticles coated with biocompatible compounds... 609 A. Abbasi, A.R. Mahjoub, A.R. Badiei, Fast and easy preparation of a novel highly acidic sulfonic
-functionalized SBA-1 cubic mesoporous catalyst and its application in the esterification of palmitic acid... 617 B. Zieliiiska, E. Borowiak-Palen, R.J. Kalenczuk, A study on the synthesis, characterization,
and photocatalytic activity ofTi02 derived nanostructures ... 625
M. S. da Luz, A.D.A. Coelho, C.A.M. dos Santos, H.J. Izario Filho, A.J.S. Machado, Structural characterization and electrical resistance of the BaPb1_xBix03 system... 639
S. Kanagesan, C. Kumar, R. Velmurugan, S. Jestrrani, Sol-gel combustion synthesis ofBi05Nao5Ti03
-Zr02 ceramic composite... 647
A. Wymyslowski, L Dowhan, 0. Wittier, R. Mrossko, R. Dudek, Application ofnanoindentation technique to extract properties of thin films through experimental and numerical analysis... 655 M. Li, F. Chen, Q. Shen, L. Zhang, Fabrication and thermal properties of Al2 Ti05/Ah03
compo-sites... 663 X. Tang, Y. Zhao, Q. Jiao, Y. Cao, A novel conversion of inert carbon nanotubes to highly
dis-persed fibres ... ... ... ... .. ... ... ... ... ... ... ... 671 J. K. Quamara, S.K. Mahna, S. Garg, Thermally stimulated depolarization current. Investigations
of copolyesteramide (Vectra B 950) polymer liquid crystal... 679 M. Jedyrl.ski, J. Hoffinan, T. Moscicki, W. Mr6z, S. Burdyrl.ska, R. Diduszko, P. Kolodziejczak,
6 Contents of Volume 28
A. K. Zak, A. Jalaliian, S.M. Hosseini, A. Kompany, T. Shekofteh Narm, Effect of Y,.. and Nb5+
eo-doping on dielectric and piezoelectric properties ofPZT ceramics... 703 W.-D. Xiang, Y.-X. Yang, J.-L. Zheng, L. Cao, H.-J. Ding, X.-N. Liu, Synthesis ofmesoporous
silica by cationic surfactant templating in various inorganic acid sources ... 709 K. Kolanek, M. Tallarida, D. Schmeisser, Atomic layer deposition ofHfD2 investigated in situ by
means of a noncontact atomic force microscopy ... ... ... .. ... ... .... .. .. ... ... ... ... 731
Y. Li, Y.-L Zou, Morphology and characterization ofcockloft-like ZnO/morin hybrid... 741
B. Zurowska, U. Kalinowska-Lis, J. Ochocki, Coordination properties of diethyl (pyridyn-2
-ylmethyl)phoshate ligand with chloride transition metal salts... 749
No.4
P. S. Sahoo, A. Panigrahi, S.K. Patri, R.N.P. Choudhary, Impedance and modulus spectroscopy studies ofBa4SrSmTi3 V 7030 ceramics... 763 H. Sahan, H. Goktepe, S. Patat, Cycling behaviour of barium doped LiMn204 cathode materials
for Li ion secondary batteries... 773
W. Wang, Q.D. Ling, M.J. Lin, Q.H. Chen, A study of a block copolymer synthesized by RAFT polymerization containing carbazole groups and a europium complex... 781
M. Sahin, H. Celikkan, A. Asan, M.L. Aksu, The effect of Congo red inhibitor on the corrosion of
various steels in a 3.5% NaCl medium... 795
Y. Zhang, Y.H. Tang, E.L. Zhang, LW. Lin, L.Z. Pei, Preparation ofNi/MgO catalysts for car-bon nanofibres by a self-propagating low temperature combustion process . . ... .. ... ... 805 P. Ou, G. Xu, C. Xu, Y. Zhang, X. Hou, G. Han, Synthesis and characterization of magnetite
nanoparticles by a simple solvothermal method... 817 Y. C. Chi, Y. Liou, Room temperature ferromagnetism in Si nanocaps on self-assembled glass beads... 823
A. Yoffe, V. Shelukhin, Modification of 306 Edwards sputtering system for the reproducible
Author Index*
Abbasi A, Mahjoub AR., Badiei AR., Fast and easy preparation of a novel highly acidic sulfonic -functionalized SBA-l cubic mesoporous catalyst and its application in the esterification of palmitic acid
Abbasi A, Reza Mahjoub A, Badiei AR., A novel highly acidic sulfonic functionalized SBA-1 cubic mesoporous catalyst and its application in the esterification of palmitic acid Ahmed N. see Durrani S.K.
Airinei A. see Racuciu M.
Akbarpour M.R., Nematzadeh F., Hasemi Arniri S.E., Rezaii H., Effect oflong duration inter-critical heat treatment on the mechanical properties of AISI 4340 steel
Akhtar J. see Durrani S.K. Aksu M.L. see Sahin M. Amarnath K. see Prasad K. Ambika N. see Kathalingam A Andrulevicius M. see Dukstiene N.
Arabi H. see Ardestani M.
Ardestani M., Arabi H., Razavizadeh H., Rezaie H.R., Mehrjoo H., Synthesis ofWC-20 wt. % Cu composite powders by eo-precipitation and carburization processes
Arefian N.A. see Kandjani AE. Asan A see Sahin M.
Badescu V. see Racuciu M.
Badiei AR. see Abbasi A Badiei AR. see Abbasi A Bahel S. see Bindra Narang S. Bakhshi F. see Eslarni H.
Balaji S., Shanmugan S., Mutharasu D., Ramanathan K., Structural, morphological and electrochem-ical characterization of electron beam deposited Li t+xMn204 ("'C = 0, 0.05) thin films
Baltakys K., Prichockiene E., Influence of CaO reactivity on the formation of low-base cal-cium silicate hydrates
Banski M., Podhorodecki A, Misie'iVi.cz J., Influence of sol-gel matrices on the optical exci ta-tion of europium ions
Bedi R.K. see Pathak D.
Beug M.F. see Ludwig C. Bhagat S. see Prasad K. Bialoilska A. see Zurowska B.
Bindra Narang S., Bahel S., Influence of frequency variations on the dielectric properties of Sm doped Ba.L~33Ti18054dielectric ceramics at various temperatures
Borowiak-Palen E. see Zieliilska B.
Boucetta S., Chihi T., Ghebouli B., Fatrni M., First-principles study of the elastic and mechan-ical properties ofNi3Al under high pressure
Burdyilska S. see Jedyilski M. Cao L., Ding H.-J. see Xiang W.-D. Cao Y. see Shen G.Z.
·Page number/Issue number.
617/3 565/2 459/2 609!3 401/2 459/2 795/4 31711 513/2 93/1 413/2 413/2 377/2 795/4 609/3 565/2 617/3 30511 511 583/2 29511 21711 19911 10511 31711 573/2 305/1 625/3 347/1 693/3 709/3 32711
8
Cao Y. see Tang X.
Celikkan H. see Sahin M. Chae Y.S. see Kathalingam A. Chen D. see Ma G.Z.
Chen F. see Li M. Chen G.Y. see Zhou D.W. Chen L. see Wang Y.
Chen Q.H. see Wang W.
Author Inde.Y
Chen Q.-H., Wang W.-J., Zhang W.-G., Structure and optical properties of (Alq,JIA1203 etha-nol colloids
Chen Z. see Wang C. Chen Z.H. see Ma G.Z. Cheng G.S. see Shen G.Z.
Chi Y.C., Liou Y., Room temperature ferromagnetism in Si nanocaps on self-assembled glass beads Chicea D. see Racuciu M.
Chihi T. see Boucetta S.
Chorfa A., Hamidouche M., Madjoubi M.A., Petit F., Mechanical behaviour of glass during cyclic instrumented indentation
Choudhary R.N.P. see Sahoo P.S. Choudhary S.N. see Prasad K. Coelho A.D.A. see Luz da M.S.
Creanga D.E. see Racuciu M. Croxford A. see Kasem K.K. Cui Q. see Zhao R.I. Dasgupta S. see Ghosh S.
Daud W.M. see Halimah M.K.
Dehghani K., Jafari A., Finite element stress analysis of forging dies to improve their fatigue life Deligoz H. see Vatansever S.
Diduszko R. see Jedyilski M.
Dowhan L. see Wymyslowski A. Dudek R. see Wymyslowski A.
Dukstiene N., Tatariskinaite L., A.ndrulevicius M., Characterization of electrochemically depo-sited thin Mo-0-C-Se film layers
Durrani S.K., Hussain M.A., Hussain S.Z., Akhtar J., Saeed A., Hussain N., Ahmed N., Fabri-cation of magnesium aluminum silicate glass ceramics by sintering route
Elanchezhiyan J. see Kathalingam A.
El-Hallag I.S., Characterization of electrodeposited nanostructured macroporous cobalt films using polystyrene sphere templates
Eslami H., Solati-Hashjin M., Tahriri M., Bakhshi F., Synthesis and characterization ofnano-crystalline hydroxyapatite obtained by the wet chemical technique
Faghihi K., Hajibeygi M., New flame-retardant and optically active poly(amide-imide)s based on N-trimellitylimido-L-amino acid and phosphine oxide moiety in the main chain: synthe
-sis and characterization
Faghihi Sani M.A. see Golmohammad M. Fatrni M. see Boucetta S.
Garg S. see Quamara J.K. Ghebouli B. see Boucetta S.
Ghosh S., Dasgupta S., Synthesis, characterization and properties ofnanocrystalline perovskite cathode materials
Goktepe H. see Sahan H.
671/3 795/4 513/2 595/2 663/3 229/1 467/2 781/4 15/1 15311 595/2 327/1 823/4 609/3 34711 25511 763/4 317/1 639/3 609/3 439/2 189/1 427/2 17311 139/1 85/1 693/3 647/3 647/3 93/1 459/2 513/2 24511 511 545/2 42112 34711 679/3 34711 427/2 773/4
Author Index 9 Golmohammad M., Nemati Z.A., Faghihi Sani M.A., Synthesis and characterization
ofnano-crystalline barium strontium titanate 421/2
Goyal S.C. see Sharrna B.K. 313/1
Guo Q. see Wang Y. 467/2
Guo Y. see Wang B. 207/1
Gtirkaynak M.A. see Vatansever S. 8511
Hai H. see Qi J. 535/2
Hajibeygi M. see Faghihi K. 545/2
Halimah M.K., Daud W.M., Sidek H.A.A., Zaidan A.W., Zainal A.S., Optical properties of
ternary tellurite glasses 173/1
Hamidouche M. see Chorfa A. 255/1
Ran G. see Ou P. 817/4
Hanninger D. see Kasem K.K. 439/2
Hasemi Arniri S.E. see Akbarpour M.R. 401/2
HeY. see Wang C. 153/1
Henkel K., Seirne B., Paloumpa I., Muller K., Schmeisser D., Optimization of MFIS structures
containing poly(vinylidene-fluoride trifluoroethylene) for non-volatile memory applications 117/1
Hoffman J. see Jedynski M. 693/3
Hosseini S.M. see Zak A.K. 703/3
HouX.seeOuP. 817/4
HuG. see Wang B. 207/1
Huang Y.N. see Zhang J. 357/1
Huang Z.G. see Zaremba T. 43/1
Hussain M.A. see Durrani S.K. 459/2
Hussain N. see Durrani S.K. 459/2
Hussain S.Z. see Durrani S.K. 459/2
Izario Filho H.J. see Luz da M.S. 639/3
Jafari A. see Dehghani K. 139/1
Jalaliian A. see Zak A.K. 703/3
Jedynski M., Hoffman J., Moscicki T., Mr6z W., Burdynska S., Diduszko R., Kolodziejczak P.,
Szyrnaftski Z., Deposition of thin hydroxyapatite films by 335 nrn Nd:YAG laser ablation 693/3
Jesurani S. see Kanagesan S. 647/3
Jha B.B., Mishra B.K., Satpati B., Ojha S.N., Effect of thermal ageing on the evolution of
microstructure and degradation of hardness of2.25Cr-1Mo steel 335/1 Jiang M., Liu X., Wang H., Xu J., Growth orientation transition and metal-like conductivity ofTi, Al
eo-doped ZnO films 273/1
Jiao Q. see Tang X. 671/3
Kajdas C.K., Kulczycki A., Kurzydlowski K.J., Molina G.J., Activation energy
oftribochemi-cal and heterogeneous catalytic reactions 523/2
Kalenczuk R.J. see Zielinska B. 625/3
Kalinowska-Lis U. see Zurowska B. 749/3
Kaminski J. see Sitek R. 163/1
Kanagesan S., Kumar C., Velmurugan R., Jesurani S., Sol-gel combustion synthesis ofBi05N~5Ti03
-Zr02 ceramic composite 647/3
Kandjani A.E., Salehpoor P., Tabriz M.F., Arefian N.A., Vaezi M.R., Synthesis ofnano-Sn02
and neural network simulation of its photocatalytic properties 377/2 Kasem K.K., Hanninger D., Croxford A., Phetteplace F., Electrochemical studies on
metal-hexacyanocobaltate(III) thin solid films in aqueous electrolytes 439/2 Kathalingam A., Arnbika N., Kim M.R., Elanchezhiyan J., Chae Y.S., R.hee J.K., Chemical
10 Author Index:
Kaur D. see Pathak D.
Kim M.R. see Kathalingam A.
Kolanek K., Tallarida M., Schmeisser D., Atomic layer deposition ofHf02 investigated in situ by means of a non contact atomic force microscopy
Kolodziejczak P. see Jedyilski M. Kompany A. see Zak A.K. Kotyilski A. see Zurowska B.
Kulczycki A. see Kajdas C.K. Kurnar C. see Kanagesan S.
Kurzydlowski K.J. see Kajdas C.K. Kurzydlowski K.J. see Sitek R. Kusters K.-H. see Lud\\-ig C. Li F. see Zhao R.I.
Li H. see Wen Y.
Li J. see Nie W.Z.
Li L. see Wang C.
Li L.-P., Zhang H.-Y., Pang J.-S., Lin J., Fabrication and performance of carbon coated copper nanoparticles
Li M., Chen F., Shen Q., Zhang L., Fabrication and thermal properties of AI2Ti05/A1203
com-posites Li W. see Ma G.Z.
Li Y., Zou Y.-L., Morphology and characterization ofcockloft-like ZnO/morin hybrid Lin J. see Li L.-P.
Lin LW. see Zhang Y.
Lin M.J. see Wang W.
Lin X.F., Zhou R.M., Zhang J.Q., Sheng X.H., Preparation and photocatalytic activity of Cu20 nanoparticles
Ling Q.D. see Wang W.
Liou Y. see Chi Y.C. Liu J.S. see Zaremba T. Liu J.S. see Zhang J. Liu J.S. see Zhou D.W. Liu J.W. see Ma G.Z. Liu L. see Wen Y. Liu W. see Zhao R.I. Liu X. see Jiang M. Liu X.-N. see Xiang W.-D. Long C. G. see Zhang J.
Lud\vig C., Beug M. F., Ktisters K.-H., Advances in flash memory devices
Luz da M.S., Coelho A.D.A., Santos dos C.A.M., Izario Filho H.J., Machado A.J.S., Structural characterization and electrical resistance of the BaPbt-xBix03 system
Ma G.Z., Chen D., Chen Z.H., Liu J.W., Li W., The effect of cryogenic treatment on the mi-crostructure and mechanical properties of Cu46Zr46AI8 bulk metallic glass matrix compo-sites
M a Y. see Zhao R.I.
Machado A.J.S. see Luz da M.S.
Madjoubi M.A. see Chorfa A. Mahjoub AR. see Abbasi A Mahna S.K. see Quamara J.K.
199/l 513/2 731/3 693/3 703/3 573/2 523/2 647/3 523/2 163/1 105/1 189/1 479/2 67/1 153/1 18111 663/3 595/2 74113 181/l 805/4 781/4 503/2 781/4 823/4 43/1 357/1 229/1 595/2 479/2 189/1 273/1 709/3 357/1 105/1 639/3 595/2 189/l 639/3 255/1 617/3 679/3
Author Index
Marcinauskas L., ValatkeviCius P., The effect of plasma torch power on the microstructure and phase composition of alumina coatings
Mehra R.M. see Rani S. Mehrjoo H. see Ardestani M. Mishra B.K. see Jha B.B. Misievricz J. see Banski M.
Misra G. see Sharma B.K. Moczko P. see Rusinski E.
Molina G.J. see Kajdas C.K. Moscicki T. see Jedyilski M.
Mrossko R. see Wymyslowski A. Mr6z W. see Jedyilski M.
Muller K. see Henkel K. Mutharasu D. see Balaji S. Naci Koc S. see Vatansever S.
Nemati Z.A. see Golmohammad M.
Nematzadeh F. see Akbarpour M.R.
Nie W.Z., Li J., Sheng X.H., Tribological properties of oxidation modified carbon fibre -reinforced polyamide 6 composites
Ning G. see Qi J.
Nimanscy D. see Tyrpek V. Ochocki J. see Zurowska B. Ochocki J. see Zurowska B.
Ojha S.N. see Jha B.B.
Oksiizomer F. see Vatansever S.
Ou P., Xu G., Xu C., Zhang Y., Hou X., HanG., Synthesis and characterization of magnetite nanoparticles by a simple solvothermal method
Paloumpa I. see Henkel K. Pang J.-S. see Li L.-P.
Panigrahi A. see Sahoo P .S.
Patat S. see Sahan H.
Pathak D., Bedi R.K., Kaur D., Characterization oflaser ablated AglnSe2 films Patri S.K. see Sahoo P.S.
Pei L.Z. see Zhang Y.
Pei L.Z., Zhao H.S., Tan W., Yu H.Y., Zhang Q.-F., Fabrication of core-shell Ge-Ge02 nano-needles
Peng G. see Wen Y. Peng P. see Zaremba T.
Petit F. see Chorfa A. Phetteplace F. see Kasem K.K.
Phuruangrat A., Thongtem T., Thongtem S.I., Synthesis of nanocrystalline metal molybdates using cyclic microwave radiation
Plocek J. see Tyrpek V. Podhorodecki A. see Banski M.
Poltierova-Vejpravova J. see Tyrpek V. Prasad K. see Sen S.
Prasad K., Bhagat S., Amamath K., Choudhary S.N., Yadav K.L., Electrical conduction in Ba(Bi0.5Nb0.5)03 ceramics. Impedance spectroscopy analysis
Prichockiene E. see Baltakys K.
11 45112 281/1 413/2 335/1 217/1 313/1 393/2 523/2 693/3 647/3 693/3 117/1 583/2 85/1 421/2 40112 67/1 535/2 129/1 573/2 749/3 335/1 85/1 817/4 11711 181/1 763/4 773/4 199/1 763/4 805/4 7711 479/2 43/1 255/1 439/2 557/2 12911 21711 12911 26511 31711 29511
12 Author Index
Qi J., Ning G., Zhao Y., Tian M., Xu Y., Hai H., Synthesis and characterization of V ~03 mi-crocrystal particles controlled by thermod)'llamic parameters
Quamara J.K., Mahna S.K., Garg S., Thermally stimulated depolarization current. Investiga-tions of copolyesteramide (Vectra B 950) polymer liquid crystal
Racuciu M., Creanga D.E., Airinei A., Chicea D., Biidescu V., Synthesis and properties of magnetic nanoparticles coated \Vith biocompatible compounds
Ramanathan K. see Balaji S.
Rani S., Shishodia P.K., Mehra R.M., Enhancement of photovoltaic performance of quasi-solid state dye sensitized solar cell with dispersion of a hole conducting agent
Razavizadeh H. see Ardestani M. Reza Mahjoub A. see Abbasi A. Rezaie H.R. see Ardestani M. Rezaii H. see A.kbarpour M.R. Rhee J.K. see Kathalingam A.
Rusinski E., Moczko P., A combined numerical-experimental method for determining the spatial distribution of a residual stress in a notch
Saeed A. see Durrani S.K.
Sahan H., Goktepe H., Patat S., Cycling behaviour of barium doped LiMn204 cathode mate-rials for Li ion secondary batteries
Sahin M., Celikkan H., Asan A., Aksu M.L., The effect of Congo red inhibitor on the corro-sion of various steels in a 3.5% NaCl medium
Sahoo P.S., Panigrahi A., Patri S.K., Choudhary R.N.P., Impedance and modulus spectrosco-py studies ofBa4SrSmTi3 V 7030 ceramics
Sahu P. see Sen S.
Salehpoor P. see Kandjani A. E. Sallot P. see Sitek R.
Santos dos C.A.M. see Luz da M.S. Satpati B. see Jha B.B.
Schmeisser D. see Henkel K. Schmeisser D. see Kolanek K. Seetharamu S. see Suresh N. Seime B. see Henkel K.
Sen S., Sahu P., Prasad K., A novel technique for the S)'llthesis ofCaCu3Ti4012 ceramics Shanmugan S. see Balaji S.
Sharma B.K., Misra G., Goyal S.C., Quantum computations for temperature variation of re-fractive indices of covalent semiconductors
Shekofteh Narm T. see Zak A.K. Shelukhin V. see Yoffe A.
Shen G.Z., Cheng G.S., Cao Y., Xu Z., Preparation and microwave absorption of M type ferrite nanoparticle composites
Shen Q. see Li M. Sheng X. H. see Lin X.F. Sheng X. H. see Nie W.Z. Shishodia P.K. see Rani S. Sidek H.A.A. see Halimah M.K.
Sitek R., Kaminski J., Sallot P., Kurzydlowski K.J., Structure and properties of iron aluminide layers fabricated by the chemical vapour deposition on 316L steel
Solati-Hashjin M. see Eslami H. Somer M. see Vatansever S.
Srivastava A.K., Yadav B. C., Humidity sensing properties ofTi02-Sb205 nanocomposite
535/2 679/3 609/3 583/2 28111 413/2 565/2 413/2 401/2 513/2 393/2 459/2 773/4 795/4 763/4 265/1 377/2 163/1 639/3 335/1 117/1 731/3 55/1 117/1 26511 583/2 313/1 703/3 833/4 327/1 663/3 503/2 67/1 28111 173/1 163/1 5/1 85/1 49112
Author Index
Suresh N., Venkateswaran S., Seetharamu S., Influence of cenospheres of fly ash on the me-chanical properties and wear of permanent moulded eutectic Al-Si alloys
Szymaftski Z. see Jedyftski M. Tabriz M.F. see Kandjani A.E. Tahriri M. see Eslami H. Tallarida M. see Kolanek K. Tan W. see Pei L.Z.
Tang X., Zhao Y., Jiao Q., Cao Y., A novel conversion of inert carbon nanotubes to highly dispersed fibres
Tang Y.H. see Zhang Y. Tao M. see Wang Y.
Tatariskinaite L. see Dukstiene N. Thongtem S.I. see Phuruangrat A. Thongtem T. see Phuruangrat A. Tian M. see Qi J.
Tyrpek V., Poltierova-Vejpravova J., Plocek J., NiZflanscy D., Preparation and characteriza-tion ofSi02 microspheres doped with CoFe204 nanocrystals
Vaezi M.R. see Kandjani A.E. Valatkevicius P. see Marcinauskas L.
Vatansever S., Oksiizomer F., Naci Koc S., Somer M., Deligoz, H. Gilrkaynak M.A., Fabrica-tion of yttria stabilized zirconia nanoparticles by the reverse microemulsion method for SOFC applications
Velmurugan R. see Kanagesan S. Venkateswaran S. see Suresh N.
Wang B., Guo Y., HuG., On the design of biodegradable hydrogels both thermosensitive and pH sensitive
Wang C., Chen Z., HeY., Li L., Zhang D., Raman scattering of ZnO films prepared by the laser molecular beam epitaxy
Wang H. see Jiang M.
Wang W., Ling Q.D., Lin M.J., Chen Q.H., A study of a block copolymer synthesized by RAFT polymerization containing carbazole groups and a europium complex
Wang W.-J. see Chen Q.-H.
Wang Y., Chen L., Yang H., Guo Q., Zhou W., Tao M., Large-area self assembled monolayers of silica microspheres formed by dip coating
Wen Y., Li H., Peng G., Yang Y., Liu L., HRTEM nanostructural evolution of onion-like spheres in polyacrylonitrile fibres during stabilization and carbonization
Witkowska D. see Zaremba T. Wittier 0. see Wymyslowski A.
Wymyslowski A., Dowhaft L., Wittier 0., Mrossko R., Dudek R., Application ofnanoindenta-tion technique to extract properties of thin films through experimental and numerical anal-ysis
Xiang W.-D., Yang Y.-X., Zheng J.-L., Cao L., Ding H.-J., Liu X.-N., Synthesis ofmesopor-ous silica by cationic surfactant templating in variofmesopor-ous inorganic acid sources
Xu C. see Ou P. Xu G. see Ou P. Xu J. see Jiang M. Xu S.H. see Zhou D.W. Xu Y. see Qi J. Xu Z. see Shen G.Z.
Yadav B. C. see Srivastava A.K.
13 5511 693/3 377/2 511 73113 7711 671/3 805/4 467/2 9311 557/2 55712 535/2 12911 377/2 45112 8511 647/3 5511 207/1 15311 27311 78114 1511 467/2 479/2 2511 647/3 655/3 709/3 817/4 817/4 273/1 22911 535/2 327/1 491/2
14
Yadav K.L. see Prasad K. Yang H. see Wang Y. Yang Y. see Wen Y. Yang Y.-X. see Xiang W.-D.
Author lnde:r:
Yoffe A., Shelukhin V., Modification of 306 Edwards sputtering system for the reproducible fabrication of sensitive thin films
Yu H.Y. see Pei L.Z.
Zaidan A.W. see Halimah M.K. Zainal A.S. see Halimah M.K.
Zak A.K., Jalaliian A., Hosseini S.M., Kompany A., Shekofteh Narrn T., Effect of yH and Nb5- eo-doping on dielectric and piezoelectric properties ofPZT ceramics
Zaremba T., Witkowska D., Methods of manufacturing of potassium titanate fibres and whisk-ers. A review
Zhang D. see Wang C. Zhang E.L. see Zhang Y. Zhang H.-Y. see Li L.-P. Zhang J. see Zaremba T. Zhang J. see Zhao R.I.
Zhang J., Huang Y.N., Long C.G., Zhou D.W., Liu J.S., Density functional study ofMg2FeH6 complex hydride
Zhang J.Q. see Lin X.F. Zhang L. see Li M. Zhang Q.-F. see Pei L.Z. Zhang W.-G. see Chen Q.-H. Zhang Y. see Ou P.
Zhang Y., Tang Y.H., Zhang E.L., Lin L.W., Pei L.Z., Preparation of Ni!MgO catalysts for carbon nanofibres by a self-propagating low temperature combustion process
Zhao H.S. see Pei L.Z.
Zhao R.l., Ma Y., Zhang J., Li F., Liu W., Cui Q., Nitrogen doped carbon nanotubes and curved lamellas produced 'via pyrolysis of melamine by direct current arc discharge Zhao Y. see Qi J.
Zhao Y. see Tang X. Zheng 1.-L. see Xiang W.-D. Zhou D.W. see Zhang J.
Zhou D.W., Liu J.S., Xu S.H., Chen G.Y., First principles study on the improved dehydroge-nating properties of MgH2 systems with metal fluorides
Zhou D.W., Liu J.S., Zhang J., Huang Z.G., Peng P., Electronic mechanism of dehydrogena-tion of the Mg-Ge mixture during milling under hydrogen
Zhou R.M. see Lin X.F. Zhou W. see Wang Y.
Zielinska B., Borowiak-Palen E., Kalenczuk R.J., A study on the synthesis, characterization, and photocatalytic activity ofTi02 derived nanostructures
Zou Y.-L. see Li Y.
Zurowska B., Bialonska A., Kotyilski A., Ochocki J., Crystal structure and spectroscopic properties of [Zn(2-qmpe)Cl:J compounds containing a diethyl(quinolin-2-ylmethyl)phos-phonate ligand (2-qmpe)
Zurowska B., Kalinowska-Lis U., Ochocki J., Coordination properties of diethyl (pyridyn-2 -ylmethyl)phoshate ligand with chloride transition metal salts
317/l 467/2 479/2 709/3 833/4 7711 173/1 173/l 703/3 25/1 153/1 805/4 181/1 4311 18911 357/1 503/2 663/3 77/1 15/1 817/4 805/4 7711 18911 535/2 671/3 709/3 357/1 229/1 43/1 503/2 467/2 625/3 741/3 573/2 749/3
Keyword Index*
ac conductivity 317/1 charge trapping 105/1
acid source 709/3 chemical bath deposition 51312
acidic anions 709/3 chemical synthesis 85/1, 427/2, 535/2
adsorption 491/2 chronoamperometry 245/l
advanced oxidation process 377/2 cobalt ferrite 129/1
AFM 647/3 cockloft 741/3
A1203 45112 composite 647/3
A12Ti05/Al203 composites 663/3 conduction mechanism 317/l
alkaline earth metal molybdate 557/2 Congo red 795/4
alloy steels 795/4 controlled polymerization 781/4
(Alq")/ A\203 nanoparticles 15/1 copper nanopartic!es 181/1
amorphous matrix 217/l corrosion testing 795/4
arc discharge 18911 cryogenic treatment
ccn
595/2artificial neural network (ANN) 377/2 crystal structure 57312
atomic force microscopy 731/3 Cu20 503/2
atomic layer deposition 73113 Cu46Zr46Al8 glassy matrix composite 595/2 austenitic stainless steel 163/1 cubic mesoporous silica 565/2, 617/3
CVD 163/1
Ba doping 773/4 cycle life 773/4
Ba(Bio.sNbo.s)OJ 317/1 cyclic microwave-assisted synthesis 557/2
bainite 40112
(Ba,Sr)Ti03 42112 d core effect 313/1
biodegradable hydrogel 207/1 deformation measurements 393/2
biodiesel 565/2, 617/3 dehydrogenating properties 229/1
biomaterials 693/3 density 173/1
block copolymer 781/4 density functional theory 229/1, 357/l
dielectric loss 305i1
calcium silicate hydrate 295/1 dielectric properties 703/3
CaO reactivity 295/1 die-life improvement 139/1
carbon arc discharge 18111 dip coating 467/2
carbon coated 18111 direct band gap materials 199/1
carbon fibres 327/1, 479/2 disk 741/3
carbon nanofibres 67113 dispersed Cui 281/1
carbon nanotubes 189/1, 67113 double patterning 105/l
carburization 413/2 dual phase steels 401/2
catalyst 523/2
cenospheres 55/1 Edwards sputtering 833/4
ceramics 30511, 317/l EIS 795/4
CF lP A6 composite 67/! elastic properties 347/1
characterization methods 671/3 electocatalysis 439/2
characterizations 77/1 electric permittivity 647/3
charge transfer 217/1 electrical conductivity 427/2, 639/3
16 Keyword Index
electrical properties 763/4 high resolution transmission
electrochemical deposition 245/1 electron microscopy 479/2
electron beam evaporation 583/2 high workfunction gate 105/1
electron beam irradiation 503/2 high-k dielectric thin films 731/3
electron microscopy 85/1 high-k dielectric 10511
electronic materials 427/2 hopping model 317/1
electronic structure 43/1,357/1 humidity 491/2
enthalpy of formation 35711 hydrogen storage materials 357/1
erase saturation 10511 hydrothermal deposition 7711
erosion resistance to molten AI 663/3 hydroxyapatite 5/1' 693/3
esterification 565/2,617/3
ethanol colloids 15/1 inhibitor 795/4
ethylene glycol 817/4 interfacial adhesion 6711
europium 217/1 intermetallics 163/1' 34 711
europium complex 78114 ionic conductivity 8511
excitation mechanism 217/1 iron aluminides 163/1
exciton Bohr radius 823/4
extrusion 139/1 laser molecular beam epitaxy 153/1
layered Cui 28111
fatigue crack propagation 255/1 light scattering anisotropy 609/3
fatigue fracture 139/1 LiMn204 583/2, 773/4
Fe304 nanoparticles 817/4
FeAl 163/1 machinable glass 459/2
FeFET 117/1 macroporous films 245/1
ferrite nanoparticles 327/1 magnesium aluminum silicate 459/2
ferrite 401/2 magnetic nanoparticles 609/3
ferromagnetism 823/4 magnetic properties 245/1, 609/3, 817/4
FESEM 199/1 magnetism 749/3
fibres 25/1 mechanical properties 5511,40112, 595/2
finite element method 393/2, 655/3 mesoporous silica 709/3
first-principles calculation 4311 metal matrix composites 55/1
flame retardant 545/2 metal-like conductivity 273/1
flash 105/I MFIS 117/1
fly ash 55/I Mg-Ge mixture 4311
forging 139/J MgHz 229/I
fragmentation chain transfer 78114 microemulsion 12911
FTIR spectra 609/3, 647/3, 671/3 micropores 439/2
microspheres 12911
Ge-Ge02 nanoneedles 77/1 microstructure 335/1' 663/3
glass 255/1 microstn1cture evolution 595/2
glycine nitrate method 773/4 microwave absorption 327/1
growth-orientation transition 27311 microwave synthesis 583/2
gyro lite 295/1 modification 74113
modified electrode 439/2
hardness degradation 335/1 molybdenum oxides and hydroxides 93/1
hardness 255/1 morin 74113
heat of formation 43/1 morphology 741/3
heterogeneous photocatalyst 377/2 MoSe2 93/1
heterojunction 19911 2.25Cr-1Mo steel 33511
Keyword Index 17 nanocomposite nanocrystalline material nanocrystalline semiconductor nanoindentation nanosphere lithography nanostructures Ni/MgO catalyst non-volatile memory onion-like sphere optical band gap optical properties optical refractive index
oxidation resistance oxides
ozone palmitic acid
particle size distribution pH sensitivity 129/1,491/2 Si!, 26511, 421/2 513/2 65513 823/4 625/3 805/4 105/1,117/1 479/2 173/1 1511,93/1 313/1 18111 625/3 6711 565/2, 61 7/3 459/2 20711 573/2 503/2 217/1 phosphonic acid ester N,O-donor ligand
photodegradation photoluminescence piezoelectric properties plasma sprayed coating plasma torch
poly( amide-imide) poly( ethylene glycol) polycondensation polymer liquid crystal polystyrene latex potassium titanate precipitation pre-stress production pulse laser ablation pulsed laser deposition P(VDF-TrFE) pyrolytic carbon PZT ceramics quantum confinement Raman scattering reduction Reitveld analysis relative permittivity residual stress resistance reversible addition 703/3 45112 45112 545/2 503/2 545/2 679/3 24511 25/1 5/1 139/1 25/1 15/1,199/1 693/3 11711 18911 703/3 823/4 153/1 413/2 265/1 30511 393/2 491/2 781/4 SBA-1
scanning electron microscopy
scheelite structure selenium
self assembled monolayer self-propagating combustion SEM sensor silica microsphere silicon wafers 565/2, 617/3 535/2 557/2 9311 467/2 805/4 26511,763/4 491/2 467/2 199/1 6711 647/3 single fibre pull-out
sol-gel combustion sol-gel method solution growth solvothermal process SO NOS spectroscopy stress analysis structural properties structure 129/1, 32711, 42112, 805/4 513/2 817/4 105/1 749/3 255/1 347/1 15/1 superconducting clusters 639/3 superconductivity 639/3 synthesis conditions 709/3 synthesis 5/1 TANOS 105/1 tellurite glasses 173/1 TEM analysis 609/3 temperature coefficient of resonant frequency 305/1 temperature dependence 31311 temperature sensitivity 207/1 thermal ageing 335/1
thermal expansion ratio 663/3
thermally stimulated
depolarization current 679/3
thermodynamic parameters 535/2
thermogravimetry 413/2
thin film 439/2, 655/3, 833/4
thin film electrodeposition 93/1
Ti, AI eo-doped 27311
titania 491/2
1.13 nm tobermorite 295/1
transition metal complexes 749/3
tribochemical reaction 523/2
triboemission 523/2
tunnelling effects 823/4
18 Keyword Index
UV-VIS absorbance 609/3 X-ray diffraction 153/1,427/2, 535/2, 763/4
XRD patterns 639/3
vacuum annealing 273/1 XRD 26511, 647/3
vacuum system 833/4
vanadium oxides 535/2 yttria stabilized zirconia 85/1
Vectra B 679/3
zinc oxide 513/2, 74113
WC-Cu composites 413/2 Zn(II) 573/2
wear 55/1 ZnO compact layer 281/1
whiskers 25/1 ZnODSSC 281/1
work hardening 40112 ZnO films 153/1
ZnO thin film 273/1
