Magnetorheological elastomer composites

(1)

Delft University of Technology

Magnetorheological elastomer composites

Modeling and dynamic finite element analysis

Yarali, Ebrahim; Ali Farajzadeh, Mohammad; Noroozi, Reza; Dabbagh, Ali; Khoshgoftar, Mohammad J.; Mirzaali Mazandarani, M. DOI 10.1016/j.compstruct.2020.112881 10.1016/j.compstruct.2020.113063 Publication date 2020 Document Version Final published version Published in

Composite Structures

Citation (APA)

Yarali, E., Ali Farajzadeh, M., Noroozi, R., Dabbagh, A., Khoshgoftar, M. J., & Mirzaali Mazandarani, M. (2020). Magnetorheological elastomer composites: Modeling and dynamic finite element analysis. Composite Structures, 254, [112881]. https://doi.org/10.1016/j.compstruct.2020.112881,

https://doi.org/10.1016/j.compstruct.2020.113063 Important note

To cite this publication, please use the final published version (if applicable). Please check the document version above.

Copyright

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons. Takedown policy

Please contact us and provide details if you believe this document breaches copyrights. We will remove access to the work immediately and investigate your claim.

This work is downloaded from Delft University of Technology.

(2)

Corrigendum to

“Magnetorheological elastomer composites: Modeling and

dynamic

ﬁnite element analysis” [Compos. Struct. 254 (2020) 112881]

Ebrahim Yaralia, Mohammad Ali Farajzadeha, Reza Noroozia, Ali Dabbagha, Mohammad J. Khoshgoftarb, Mohammad J. Mirzaalic,⇑

a_{School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran 11155-4563, Iran} b_{Department of Mechanical Engineering, Faculty of Engineering, Arak University, Arak 38156-88349, Iran}

c_{Department of Biomechanical Engineering, Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology (TU Delft), Mekelweg 2, 2628 CD Delft, The Netherlands}

The authors regret to inform that unfortunately, there is a minor typo in the original version of the article. Authors apologize for this shortcoming and are aimed to report the correct data herein.

In Table 1 of the original manuscript, a6 must be considered to be equal with +2.71 (instead of−2.71).

The authors would like to apologise for any inconvenience caused.

https://doi.org/10.1016/j.compstruct.2020.113063

DOI of original article:https://doi.org/10.1016/j.compstruct.2020.112881

⇑Corresponding author.

E-mail address:M.J.MirzaaliMazandarani@tudelft.nl(M.J. Mirzaali).

Composite Structures xxx (2020) 113063

Contents lists available atScienceDirect

Composite Structures

j o u r n a l h o m e p a g e : w w w . e l s e v i e r . c o m / l o c a t e / c o m p s t r u c t

Please cite this article in press as: Yarali E et al. Corrigendum to“Magnetorheological elastomer composites: Modeling and dynamic ﬁnite element analysis” [Com-pos. Struct. 254 (2020) 112881]. Compos Struct (2020),https://doi.org/10.1016/j.compstruct.2020.113063