• Nie Znaleziono Wyników

Grijpers (summary)

N/A
N/A
Protected

Academic year: 2021

Share "Grijpers (summary)"

Copied!
1
0
0

Pełen tekst

(1)

Delft University of Technology

Faculty Mechanical, Maritime and Materials Engineering Transport Technology

W.J.M. Janszen Grijpers

Literature survey, Report TT.0180, Transport Engineering and Logistics.

After 1850, when it became possible to utilize steam-energy, grabs are more and more used. Especially after 1900 are several revolutionary types of grabs developed. The factors, of importance for the output of grabs, are identified, using methods from ground mechanics.

The requirements for hoisting engines, in order to have a satisfactory cooperation with the grabs, are illustrated at some groups of hoisting engines. Reports on Transport Engineering and Logistics (in Dutch)

Cytaty

Powiązane dokumenty

This conclusion is of primary importance while designing the mining operations advancing towards or from the protecting or shaft pillars (Fig. Increased subsidence in trough

The most important social variables fostering development of relation- ships are trust, commitment, frequent interpersonal contacts, shared norms and values, quality of

Particulate matter, in Dutch called “fijn stof”, influences weather and climate and has adverse health effects. The Netherlands is the European country with the largest loss of life

The most important changes compared to the present situation are centralizing of the storages, orders will be picked by dedicated order pickers and tablets will mainly be

De belangrijkste veranderingen vergeleken met de huidige situatie zijn dat er een centrale opslag komt, orders hier (centraal) gepikt worden en de tabletten

The collected information allowed for indicating the positive influence of mod- ern technologies used in the warehouse economy on the competitiveness of enter- prises which apply

kosten voor de katalysator zijn dan fl. Aangezien er 3 reaktoren gebruikt worden, is de totale reaktorprijs fl. corrosiviteit. rookgas)

Метод розрахунку через зміну моменту інерції (замкнутий коробчатий профіль) Розглядаючи енергетичні показники при просуванні тріщини, а саме швидкість