Upgraded testing standard E90 Cable Tray:
KCJ/KCOJ...H60, KBJ...H60
KFJ...H60
KGJ/KGOJ...H60, Cable Tray:
KGL/KGOL...H60, KCL/KCOL...H60, KBL...H60 KFL...H60,
XIX
Upgraded Testing Standard
In order to meet and even exceed Customers expectations, BAKS has conducted tests that are beyond the standard with selected cable producers. These are tests that totally outclass the DIN 4102 part 12 standard criteria regarding the construction and loading figures of cable runs. Successful tests convinced us to offer our Customers new and improved solutions. Further in this catalogue you will find detailed information on cable producers, with whom we have conducted fire tests, however, for in-depth technical details please advise our technical support team or visit our website for additional technical documentation
Standard Criterion Criterion Higher Than Standard Confirmed by Successful Testing
Maximum Spacing of Supports for Cable Trays, Ladders, and Wire Mesh Cable Trays – 1.2m
Maximum Spacing of Supports for Cable Trays, Ladders, and Wire Mesh Cable Trays – 1.5m
Maximum Total Cable Trays Width=300mm under Maximum Load of 10kg/m Maximum Total Ladder Width=400mm
under Maximum Load of 20kg/m
Maximum Spacing of Cable Ladder Rungs=150mm under Maximum Load of 20kg/m Material Thickness of Cable Tray=1.5mm
under Maximum Load of 10kg/m Material Thickness of Cable Ladder=1.5mm
under Maximum Load of 20kg/m
Material That Cable Runs Are Manufactured from – Strip Galvanised Steel to the Sendzimir Method (SG)
Fixing a Cable Run to Concrete
Maximum Spacing of Supports for Cable Clips - 0.3m Cable Run Assembly Ceiling to the
on Threaded Rod M10
Maximum Total Cable Trays Width=600mm under Maximum Load of 20kg/m Maximum Total Ladder Width=600mm
under Maximum Load of 20kg/m Maximum Total Ladder Width=400mm under Maximum Load of 25kg/m (DUP/DUOP) Maximum Spacing of Cable Ladder Rungs=300mm
under Maximum Load of 20kg/m
Material Thickness of Cable Tray=0.7mm, 1.0mm, 1.2mm, 1.5mm under Maximum Load of 20kg/m
Material Thickness of Cable Ladder=1.2mm under Maximum Load of 20kg/m
Material That Cable Runs Are Manufactured from – Hot-dip galvanised Steel (HDG); Stainless Steel (SS)
Fixing Cable Run to Steel Structures and to Aerated Concrete
Maximum Spacing of Supports for Cable Clips - 0.6m Cable Run Assembly Ceiling to the
without the Use of Threaded Rod
Upgraded testing standard E90
Increased spacing between supports
Upgraded testing standard E90
System E-90 with components made from stainless steel, hot dip galvanized steel and powder painted
We have carried out tests exceeding standard with cable trays and cable ladders with between supports 1.5m and max. load of 20kg/m
We have carried out tests exceeding standard with cable trays and cable ladders made from stainless steel
Upgraded testing standard E90
We have carried out tests exceeding standard with cable trays with 0,7mm thickness
We have carried out tests exceeding standard
with cable trays with 1.0mm thickness
Max. Cable Tray Width 100 mm Cable Tray Thickness 0,7 mm Max. Spacing of Supports 1.5 m Max. Safe Load 5 kg/m
1 7
2
4 3
6 5
8
Cable Tray Width 400 mm Cable Tray Thickness 1,0 mm Max. Spacing of Supports 1.5 m Max. Safe Load 20 kg/m
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
1
3
5 2
6 7 8
Cable Tray
Threaded Rod
Nut Screw Set
Support Channel Screw Set
Washer
KCJ/KCOJ400H60/3 PGM8/1
NSM8 SGKM6x12
CWP/CWOP40H40/05 SGKM6x12
PW6
650801
650144 805305 661020 651141 160440
660844 2
2
8 6
1 2 2
4 Washer PW8 650944 8
Example of Assembly Exceeding Standard for Cables Distribution - Cable Tray to the Ceiling.
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
1
3
5 2
6
Cable Tray
Threaded Rod Nut Screw Set
Joint Connector Washer
KGL/KGOL100H60/3
PGM6/1 NSM6 SGKM6x12
ZSW PW6
650301 650144 902200 651141 160116
660844 2
1 2 6
1 2 4
3
1
2
4 6 5
Example of Assembly Exceeding Standard for Cables Distribution - Cable Tray to the Ceiling.
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
1
3 2
Cable Tray
Side Holder Screw Set
KGL/KCL/KPL50H60/3 WC50 SGKM6x12
730304 651141 160424 2
1 4
Example of Assembly Exceeding Standard for Cables Distribution - Cable Tray to the Ceiling.
Max. Cable Tray Width 100 mm Cable Tray Thickness 0,7 mm Max. Spacing of Supports 1.5 m Max. Safe Load 5 kg/m
4 Bolt Anchor PSROM10x80 804100 1
5 Screw Set SGKM6x12 651141 1
5 3
1
2
4
Mounting threaded rod onto ceiling:
- indirectly through Rod Hanger USV/USOV with Bolt Anchor PSROM10 - directly with Drop-In Anchor - Steels TRSOM... without the use of Rod Hangers USV/USOV
=
1 Example of Assembly Exceeding Standard 5 for Cables Distribution - Cable Tray with Cover to the Ceiling.
Cable Tray Width 400 mm Cable Tray Thickness 1,0 mm Max. Spacing of Supports 1.5 m Max. Safe Load 20 kg/m
2
9
6
8 7
10 3
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
1
3
6 2
7
Cable Tray Screw Set
KGJ/KGOJ400H60/3 SGKM6x12 651141
161216 2 8
5 Threaded Rod
Nut Support Channel
Screw Set Washer
PGM8/1
NSM8 CWP/CWOP40H40/05
SGKM6x12 PW6
650801
650144 805305 661020 660844
2
8 1 2 2
Washer PW8 650944 8
Cover PKJ400/3 100640 2
Example of Assembly Exceeding Standard for Cables Distribution - Cable Tray with Cover to the Ceiling.
Cable Tray Width 300 mm Cable Tray Thickness 0,7 mm Max. Spacing of Supports 1.5 m Max. Safe Load 20 kg/m
1 5
4
9
6
8 7
10
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
1
3 2
Cable Tray Screw Set
KCL/KCOL300H60/3 SGKM6x12 651141
160830 2 7
Threaded Rod
Nut Support Channel
Screw Set Washer
PGM8/1
NSM8 CWP/CWOP40H40/04
SGKM6x12 PW6
650801
650144 805304 661020 660844
2
4 1 2 2
Washer PW8 650944 4
Cover PKL300/3 100630 2
3
Cover Clamp ZPNH60 165000 8
5 6 7 8 4
9 10
2
4
4 Cover Clamp ZPNH60 165000 8
8 9 10
XIX
Mounting threaded rod onto ceiling:
- indirectly through Rod Hanger USV/USOV with Bolt Anchor PSROM10 - directly with Drop-In Anchor - Steels TRSOM... without the use of Rod Hangers USV/USOV
=
Mounting threaded rod onto ceiling:
- indirectly through Rod Hanger USV/USOV with Bolt Anchor PSROM10 - directly with Drop-In Anchor - Steels TRSOM... without the use of Rod Hangers USV/USOV
=
1 5
Example of Assembly Exceeding Standard for Cables Distribution - Cable Tray with Cover and Ladder to the Ceiling.
Cable Tray Width 400 mm Cable Tray Thickness 1,0 mm Max. Spacing of Supports 1.5 m Max. Safe Load 20 kg/m for one level
2
13
9
11 10
12
3
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
Example of Assembly Exceeding Standard for Cables Distribution - Cable Tray
with Cover and Wire Mesh Cable Tray to the Ceiling.
Cable Tray Width 400 mm Cable Tray Thickness 1,0 mm Max. Spacing of Supports 1.5 m Max. Safe Load 20 kg/m for one level
1
5
2
12 10
7
11
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
1
3
8 2
9 10 11
Cable Tray Screw Set
KBJ400H60/3
SGKM6x12 651141 161640 2
8
7 Threaded Rod
Nut Support Channel
Screw Set Washer
PGM10/1
NSM10 CWP40H22/05
SGKM6x12 PW6
651001
650244 611205 661020 660844
2
8 2 2 4
Washer PP10 650544 8
Cover PKJ400/3 100640 2
6
5 6
Cable Tray Joint Connector
KDS/KDSO400H60/3 USSN/USSO 900201
970140 2 5
6
7
8
14 15
16
3
12
8 9
Clamping Piece ZS/ZSO 901600 2
13 12
4
4 Cover Clamp ZPDH60 160800 8
13
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
1
3 2
Cable Tray Screw Set
KCJ/KCOJ400H60/3 SGKM6x12 651141
160440 2 8
7
Screw Set Washer
SGKM6x12 PW6
661020 660844
2 2
Cover PKJ400/3 100640 2
12 5 6
Ladder Straight Connector
DUP/DUOP400H60/3 LDC/LDOCH60 461001
466340 2 2
13
Hold Down Clamp Screw Set
ZM/ZMO SGKM8x14
400700 651241
2 2 14
15
Washer PW8 650944 2
Screw Set SGKM8x14 651241 8
16 9 10 11
8 Threaded Rod
Nut Support Channel
PGM10/1
NSM10 CWP40H22/05
651001
650244 611205
2
8 2
Washer PP10 650544 8
4 Cover Clamp ZPNH60 165000 8
4
Mounting threaded rod onto ceiling:
- indirectly through Rod Hanger USV/USOV with Bolt Anchor PSROM10 - directly with Drop-In Anchor - Steels TRSOM... without the use of Rod Hangers USV/USOV
=
Mounting threaded rod onto ceiling:
- indirectly through Rod Hanger USV/USOV with Bolt Anchor PSROM10 - directly with Drop-In Anchor - Steels TRSOM... without the use of Rod Hangers USV/USOV
=
8 1
10
2
5
3
4
7 6
Cable Tray Width 400mm.
Cable Tray Thickness 1,0 mm Material: Stainless Steel Max. Spacing of Supports 1.5 m Max. Safe Load 20 kg/m for one level
9
Example of Assembly Exceeding Standard for Cables Distribution - Cable Tray to the Ceiling.
Example of Assembly Exceeding Standard for Cables Distribution - Cable Tray to the Ceiling on Two Levels
Optional transition from cable run of trays in the horizontal plane to the vertical plane only through the use of cable ladders.
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
OPTIONALLY TO COMPLETE THE SET *
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
Cable Tray Width 400 mm Cable Tray Thickness 1,0 mm Max. Spacing of Supports 1.5 m Max. Safe Load 20 kg/m
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
OPTIONALLY TO COMPLETE THE SET *
LIST OF ELEMENTS TO CONNECT 4 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
1
3 4*
5*
6*
2
7 8
10*
9
11 5*
6*
Cable Tray
Threaded Rod Rod Hanger
Washer Nut Screw Set
Support Channel Screw Set
Bolt Anchor
Drop-In Anchor Washer
Washer Nut
KCJ/KCOJ400H60/3E
PGM10/1E USV/USOVE
PP10E NSM10E SGKM6x12E
CWP/CWOP40H40/05E SGKM6x12E PSROM10x80E
TRSOM10E PW6E
PP10E NSM10E
805400 652101
652300 652200 805305 661020 661020 861940
804101
804801 660844
652300 652200
4
2 2 12 12 16
2 4
2
2 4
8 8 1
3 4*
5*
6*
2
7 8
10*
9
11 5*
6*
Cable Tray
Threaded Rod Rod Hanger
Washer Nut Screw Set
Support Channel Screw Set
Bolt Anchor
Drop-In Anchor Washer
Washer Nut
KCJ/KCOJ400H60/3E
PGM10/1E USV/USOVE
PP10E NSM10E SGKM6x12E
CWP/CWOP40H40/05E SGKM6x12E PSROM10x80E
TRSOM10E PW6E
PP10E NSM10E
805400 652101
652300 652200 805305 661020 661020 861940
804101
804801 660844
652300 652200
2
2 2 8 8 8
1 2
2
2 2
4 4
XIX
Mounting threaded rod onto ceiling:
- indirectly through Rod Hanger USV/USOV with Bolt Anchor PSROM10 - directly with Drop-In Anchor - Steels TRSOM... without the use of Rod Hangers USV/USOV
=
Mounting threaded rod onto ceiling:
- indirectly through Rod Hanger USV/USOV with Bolt Anchor PSROM10 - directly with Drop-In Anchor - Steels TRSOM... without the use of Rod Hangers USV/USOV
=
*
11*
11Cable Tray Width 400 mm Cable Tray Thickness 1.2 mm Max. Spacing of Supports 1.5 m Max. Safe Load 10 kg/m
8 1
10
2
5
3 4
6
7
9
Example of Assembly Exceeding Standard for Cables Distribution - Cable Tray to the Ceiling.
10 1
12
4
7 3
5
6
9 8
Cable Tray Width 400 mm Cable Tray Thickness 1.5 mm Max. Spacing of Supports 1.5 m Max. Safe Load 20 kg/m
11
Example of Assembly Exceeding Standard for Cables Distribution - Cable Tray to the Ceiling.
2
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
OPTIONALLY TO COMPLETE THE SET *
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
Cable Tray Straight Connector
Joint Plate
Threaded Rod Rod Hanger
Washer Nut Screw Set
Support Channel Screw Set
Bolt Anchor
Drop-In Anchor Washer
Washer Nut 1
2 3
5 6*
7*
8*
4
9 10
12*
11
13 7*
8*
KCP/KCOP400H60/3 LPP/LPOPH60
BL/BLO400
PGM10/1 USV/USOV
PP10 NSM10 SGKM6x12
CWP/CWOP40H40/05 SGKM6x12 PSROM10x80
PW6
TRSOM10 PP10 NSM10
160840
750709 651001
650544 650244 611105 651141 651141 100140 163111
804100 650844
804800 650544 650244
2 2 1
2 2 8 8 1 2
2 2
2 4 4 16 No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
OPTIONALLY TO COMPLETE THE SET *
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
Cable Tray
Threaded Rod Rod Hanger
Washer Nut Screw Set
Support Channel Screw Set
Bolt Anchor Washer
Drop-In Anchor Washer
Nut
KCD/KCOD400H60/3
PGM10/1 USV/USOV
PP10 NSM10 SGKM6x12
CWP/CWOP40H40/05 SGKM6x12 PSROM10x80
PW6
TRSOM10 PP10 NSM10
750709 651001
650544 650244 611105 651141 651141 160640
804100 650844
804800 650544 650244
2
2 2 8 8 8
1 2
2 2
2 4 4 1
2 3
5*
6*
7 8 4*
9 10*
11 5*
6*
Mounting threaded rod onto ceiling:
- indirectly through Rod Hanger USV/USOV with Bolt Anchor PSROM10 - directly with Drop-In Anchor - Steels TRSOM... without the use of Rod Hangers USV/USOV
=
Mounting threaded rod onto ceiling:
- indirectly through Rod Hanger USV/USOV with Bolt Anchor PSROM10 - directly with Drop-In Anchor - Steels TRSOM... without the use of Rod Hangers USV/USOV
=
Example of Assembly Exceeding Standard for Cables Distribution - Cable Tray to the Ceiling.
1
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
LIST OF ELEMENTS TO CONNECT 4 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
Cable Tray KGL/KGOL100H60/3 160116 2 1
Threaded Rod Drop-In Anchor
Washer Nut Screw Set
Support Channel Screw Set
Washer
PGM10/1 TRSOM10
PP10 NSM10 SGKM6x12
CWP/CWOP40H40/05 SGKM6x12
PW6
804800 651001
650544 650244 611105 651141 651141
650844 2 2 4 4 11
1 3 3 3
4
6 7 8 9 5
10
Cable Tray KGL/KGOL200H60/3 160316 2 2
2
3
4 5
6
8 7 10 9
Example of Assembly Exceeding Standard for Cables Distribution - Cable Tray and Wire Mesh Cable Tray to the Ceiling.
8
7
15
10
12 11
6 5
2
1 4
3
13 9
14
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS and 2 PCS OF IRE MESH TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
1 2 3
7 5 4
8 9 10 11 6
13 12
Cable Tray Screw Set
Rod Grip
2
2
Bracket WWS/WWSO400
SGKM6x12
UPW/UPWO
160440
710540 651141
750100 8
2 KCJKCOJ400H60
Wire Mesh Cable Tray Joint Connector
KDS/KDSO400H60/3 USSN/USSO
2 5 970140 900201
Ceiling Bracket
Threaded Rod Washer
Nut Screw Set Screw Set
1
2 4 4 2 2 WPCW/WPCO400
PGM8/1 PP8 NSM8 SMM10x60 SGKM6x12
750640
650801 650444 650144 650943 651141
Spacer BR40 700100 1
Clamping Piece ZS/ZSO 901600 2
14
Screw Set SGKM8x14 651241 4
15
XIX
Mounting threaded rod onto ceiling:
- indirectly through Rod Hanger USV/USOV with Bolt Anchor PSROM10 - directly with Drop-In Anchor - Steels TRSOM... without the use of Rod Hangers USV/USOV
=
Mounting threaded rod onto ceiling:
- indirectly through Rod Hanger USV/USOV with Bolt Anchor PSROM10 - directly with Drop-In Anchor - Steels TRSOM... without the use of Rod Hangers USV/USOV
=
The maximum width of the sum of the cable trays 600 mm Cable Tray thickness 0.7 mm
Spacing of supports 1.5 m Max. safe load 10 kg/m
Cable Tray thickness 1.0 mm
Cable Tray and Wire Mesh cable Tray width 400 mm Spacing of supports 1.5 m
Max. safe single - side load 20 kg/m
2
14 13 18
17
1
6 7
4 5
3
8
9 10
15
12 16
Example of Assembly Exceeding Standard for Cables Distribution - Cable Tray to the Ceiling.
1
2
4
9 8
3 11
12
7
5
6
10
13
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
OPTIONALLY TO COMPLETE THE SET *
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
1 2 3
7*
5 4
8*
9*
10 11 6
13*
12
14 8*
9*
Cable Tray Screw Set
Ceiling Bracket Threaded Rod
Washer Nut Rod Grip
Screw Set Screw Set
Screw Set Bolt Anchor
Drop-In Anchor Washer
Nut
TRSOM10 PP10 NSM10
2
1 1 1 4 4 1
2 2
2 2+1
1 2 2 Bracket
Rod Hanger
KGL/KGOL300H60/3 WMC/WMCO300
USV/USOV SGKM6x12
WPCW/WPCO400 PGM10/1
PP10 NSM10 UPW/UPWO
SGKM8x14 SMM10x30
SGKM6x12 PSROM10x80
160416 711130
750709 651141
750640 651001
650544 650244 750100
651241 650843
651141 804100
804800 650544 650244
7 1
13* Bolt Anchor PSROM10x80 804100 2
Cable Tray Width 300 mm Cable Tray Thickness 0,7 mm Max. Spacing of Supports 1.5 m Max. Safe Load 20 kg/m
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS, 2 PCS OF LADDERS AND 2 PCS OF WIRE MESH CABLE TRAY LIST OF ELEMENTS TO CREATE SUPPORT
1 2 3
7 5 4
8 9 10 11 6
12
Cable Tray Screw Set
2 SGKM6x12
161216 651141 8 KGJ/KGOJ400H60
13 14
Ladder Straight Connector
DUD400H60/3N LDC/LDOCH60
2 2 466040 461001
15 16 17
Rod Grip 3
Bracket WWS/WWSO400
UPW/UPWO
710540 750100
3 Wire Mesh Cable Tray
Joint Connector
KDS/KDSO400H60/3 USSN/USSO
2 5 970140 900201
Ceiling Bracket
Screw Set Screw Set
1
6 2 WPCB1000
SMM10x30 SGKM6x12
752010
650843 651141
Clamping Piece ZS/ZSO 901600 2
Screw Set SGKM8x14 651241 8
Hold Down Clamp ZM/ZMO 400700 2
Screw Set SGKM8x14 651241 8
18
Threaded Rod Washer
Nut
1 6 6 PGM10/1
PP10 NSM10
651001 650544 650244
Bolt Anchor PSROM10x80 804100 2
19
20 Drop-In Anchor TRSOM10 804800 1
19
20 11
Mounting threaded rod onto ceiling:
- indirectly through Rod Hanger USV/USOV with Bolt Anchor PSROM10 - directly with Drop-In Anchor - Steels TRSOM... without the use of Rod Hangers USV/USOV
=
Mounting threaded rod onto ceiling:
- indirectly through Rod Hanger USV/USOV with Bolt Anchor PSROM10 - directly with Drop-In Anchor - Steels TRSOM... without the use of Rod Hangers USV/USOV
=
*
14Example of Assembly Exceeding Standard for Cables
Distribution in Tray, Wire Mesh Cable tray and Ladder - to the Ceiling
Cable Tray , Ladder and Wire Mesh Cable Tray width 400 mm Cable Tray thickness 1.0 mm
Ladder thickness 1.2 mm Rungs spacing 300 mm Spacing of supports 1.5 m Max. safe load for 1 level 20 kg/m
Example of Assembly Exceeding Standard for Cables Distribution - Cable Tray to the Ceiling.
Cable Tray Width 400 mm Cable Tray Thickness 1.2 mm Max. Spacing of Supports 1.5 m Max. Safe Load 10 kg/m
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
OPTIONALLY TO COMPLETE THE SET *
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
1 2 3
7*
5 4
8*
9*
10 11 6
13*
12
14 8*
9*
Cable Tray Screw Set
Ceiling Bracket Threaded Rod
Washer Nut Rod Grip
Screw Set Screw Set
Screw Set Bolt Anchor
Drop-In Anchor Washer
Nut
TRSOM10 PP10 NSM10
2
1 1 1 4 4 1
2 2
2 2+1
1 2 2 Bracket
Rod Hanger
KCD/KCOD400H60/3 WWS/WWSO400
USV/USOV SGKM6x12
WPCW/WPCO400 PGM10/1
PP10 NSM10 UPW/UPWO
SGKM8x14 SMM10x30
SGKM6x12 PSROM10x80
160640 710540
750709 651141
750640 651001
650544 650244 750100
651241 650843
651141 804100
804800 650544 650244
8
1
12
4
9 8
3 11
12
7 5
6
10
13
XIX
Cable Tray Width 400mm Cable Tray Thickness 1,0 mm Max. Spacing of Supports 1.5 m Max. Safe Load 20 kg/m
Example of Assembly Exceeding Standard for Cables Distribution - Cable Tray to the Ceiling.
1
2
4 8 11 9
10
13
12
3 5
6 7
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
2
5 3
6 7*
8*
9*
4
11 10
12 13*
Screw Set
Ceiling Bracket Threaded Rod
Washer Nut Rod Grip
Screw Set Screw Set
Screw Set Bolt Anchor
Bracket
Rod Hanger
14 8*
9*
Drop-In Anchor Washer
Nut
OPTIONALLY TO COMPLETE THE SET *
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
SGKM6x12E WMC/WMCO400E
USV/USOVE UPW/UPWOE
SGKM8x14E SMM10x30E
SGKM6x12E PSROM10x80E WPCW/WPCO400E
PGM10/1E
PP10E NSM10E
TRSOM10E PP10E NSM10E
8
1 1
1 1 4 4 1
2 2
2 2+1
1 2 2 661020 740040
750140 652101 805400 652300 652200 803301
661030 652600
661020 804101
804801 652300 652200 1 Cable Tray KCJ/KCOJ400H60/3E861940 2
Mounting threaded rod onto ceiling:
- indirectly through Rod Hanger USV/USOV with Bolt Anchor PSROM10 - directly with Drop-In Anchor - Steels TRSOM... without the use of Rod Hangers USV/USOV
=
Mounting threaded rod onto ceiling:
- indirectly through Rod Hanger USV/USOV with Bolt Anchor PSROM10 - directly with Drop-In Anchor - Steels TRSOM... without the use of Rod Hangers USV/USOV
=
*
14*
14Example of Assembly Exceeding Standard for Cables Distribution - Cable Tray to the Ceiling without the Use of Threaded Rod Support
Cable Tray Width 400 mm Assembly without threaded rod Cable Tray Thickness 1.5 mm Max. Spacing of Supports 1.5 m Max. Safe Load Cable Tray 20 kg/m
3
6
2
1
5
7 4
8
9 10
11
Cable Tray Width 400 mm Assembly without threaded rod
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
1 2 3
11 5 4
10 6
Cable Tray Straight Connector
Joint Plate
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
7 8 9
Screw Set Bracket
Spacer Ceiling Bracket
Washer Bolt Anchor
Screw Set Screw Set
KCP/KCOP400H60/3 LPP/LPOPH60
BL/BLO400 SGKM6x12 WWCT/WWCTO400
BR70 WPCE/WPCEO800
PW6 PSROM10x80
SGKM6x12 SMM10x120
651141 100140 163111 160840
713040
700400 721580 650884 804100 651141 651443
2 2 1 16 1
1 1
2 2
1 2
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
LIST OF ELEMENTS TO CREATE SUPPORT 1
2 3
7 5 4
8 9 10
6
12 11
Cable Tray Screw Set
4 SGKM6x12
161016 651141 12 KGJ/KGOJ200H60/3
13 14
Ladder Straight Connector
DUD200H60/3N LDC/LDOCH60
4 4 466020 461001
15
Bracket WWS/WWSO200 710520 6
Wire Mesh Cable Tray Joint Connector
KDS/KDSO200H60/3 USSN/USSO
4 8 970120 900201
Ceiling Bracket
Screw Set Screw Set
1
6 4 WPCB1000
SMM10x80 SGKM6x12
752010
651043 651141
Clamping Piece ZS/ZSO 901600 4
Screw Set SGKM8x14 651241 4
Spacer BR55 700300 3
Hold Down Clamp ZM/ZMO 400700 4
Screw Set SGKM8x14 651241 16
1
2 10
8 11
12
13
9
6 7
4
3
5
14 15
Max. Cable Tray and Wire Mesh Cable Tray Width 200 mm Assembly without threaded rod
Cable Tray Thickness 1,0 mm Ladder Material Thickness – 1.2 mm Max. Spacing of Supports 1.5 m Max. Safe Load 10 kg/m for one level
Example of Assembly Exceeding Standard for Cables Distribution in Tray, Wire Mesh Cable Tray - to the Ceiling without
the Use of Threaded Rod Support
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS, 2 PCS OF LADDERS AND 2 PCS OF WIRE MESH CABLE TRAY
XIX
Cable Tray Thickness 1.5 mm Max. Spacing of Supports 1.5 m Max. Safe Load 10 kg/m
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
LIST OF ELEMENTS TO CONNECT 4 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
1 2 3
5 6 7 4
8 9 10
16 11 12 13 14 15
Cable Tray Straight Connector
Screw Set
Bracket
Bolt Anchor Rod Grip Threaded Rod Artic. Rod Hanger
Washer Nut Joint Plate
Bracket Cable Tray
Joint Plate
Screw Set Screw Set
KCP/KCOP100H60/3F LPP/LPOPH60F
SGKM6x12E
WU/WUO200F PSROM10x80E UPW/UPWOF
PGM10/1E WPPGV/WPPOV
PP10E NSM10E BL/BLO200F
WU/WUO100F KCP/KCOP200H60/3F
BL/BLO100F
SGKM8x14E SGKM6x12E
169311 860701 661020
--- 804101 803502 652101 731401 652300 652200 862421
--- 169321
862411
661030 661020
2 4
1
5 2 1 1 6 6 24
1
1 2
1
4 3
1 2
3
5 6
9
8
7
4
11
10 13
14
15 12
16
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
LIST OF ELEMENTS TO CONNECT 4 PCS OF CABLE TRAYS AND LADDERS LIST OF ELEMENTS TO CREATE SUPPORT
1 2 3
5 6 7 4
8 9 10
16 11 12 13 14 15
Cable Tray Ladder Straight Connector
Bracket
Screw Set Rod Grip Threaded Rod
Rod Hanger Washer
Nut Screw Set
Bracket Cable Tray
Screw Set
Screw Set Screw Set
KCJ/KCOJ400H60/3 DUD/DUOD400H60/3
LDC/LDOCH60
WMC/WMCO400
SMM10x30 UPW/UPWO
PGM10/1 WKPO
PP10 NSM10 SGKM6x12
WWS/WWSO400 KGJ/KGOJ400H60/3
SGKM8x14
SGKM8x14 SGKM6x12
160440 466040 461001
711140
650843 750100 651001 750809 650554 650224 651141
710540 161216
651241
651241 651141
2 4
2
9 4 2 1 12 12 4 16
2 2
16
12 4
Hold Down Clamp ZM/ZMO 400700 4
17
Support Channel CWP/CWOP40H40/1 611110 1 18
10
18
13
1 7
3
3
4
5
6
9 8
7 11 15
2
12 15
17
16
Cable Tray Thickness 1,0 mm Ladder Material Thickness – 1.2 mm Max. Spacing of Supports 1.5 m Max. Safe Load 20 kg/m for any level
Example of Assembly Exceeding Standard
for Cables Distribution in Cable Tray and on Ladder Example of Assembly Exceeding
Standard for Cables Distribution in Tray to the tunnel wall
Assembly Channel to the Wall with 3 Bolt Anchors PSROM10x120
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
1 2 3
7*
5*
4
8 9 10 6*
2
SGKM6x12 8
160640 651141 Cable Tray KCD/KCOD400H60/3
Bracket
PD11 803100 Spacer
Threaded Rod Rod Hanger
Washer Nut
Screw Set 11
12*
Bracket
WFL/WFLO400
PSROM10x80
1
1+1 720140
804100 Bolt Anchor
1
PGM10/1 1
USV/USOV 1
651001 750709
PP10 4
NSM10 4
650544 650244
WFL/WFLO500 720150 1 SMM10x20 650743 2
SGKM6x12 651141 2 Screw Set
OPTIONALLY TO COMPLETE THE SET *
13 6*
7*
TRSOM10 804800 1 Drop-In Anchor
PP10 2
NSM10 2
650544 650244 Washer
Nut Screw Set
Example of Assembly for Cables Distribution - Cable Tray to the Ceiling.
Cable Tray Width 400mm Cable Tray Thickness 1.2 mm Max. Spacing of Supports 1.5 m Max. Safe Load 10 kg/m
11
5
7
6
8 9
12
1 2 3
10 Example of Assembly Exceeding Standard
for Cables Distribution - Cable Tray to the Ceiling.
Cable Tray Width 400 mm Cable Tray Thickness 1.5 mm Max. Spacing of Supports 1.5 m Max. Safe Load 20 kg/m
1 2
3 4
6 7
9 8 10 11
5
12
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
1 2 3
7 5 4
8 9 10 11 6
12
Cable Tray Straight Connector
Screw Set
Threaded Rod
Washer Nut Screw Set Joint Plate
Bolt Anchor Bracket
Drop-In Anchor
Spacer
LPP/LPOPH60 SGKM6x12
PGM10/1
PP10 NSM10 SGKM6x12 BL/BLO400
PSROM10x80 WFC/WFCO400
TRSOM10
PD11
2 2 16 160840 163111 651141
1 720340
1 1 651001 804800
2 2 650544 650244
2 651141
1 100140
1 804100
1 803100 KCP/KCOP400H60
4
Mounting threaded rod onto ceiling:
- indirectly through Rod Hanger USV/USOV with Bolt Anchor PSROM10 - directly with Drop-In Anchor - Steels TRSOM... without the use of Rod Hangers USV/USOV
=
*
13Cable Tray Width 400mm Cable Tray Thickness 1.5 mm Max. Spacing of Supports 1.2 m Max. Safe Load 10 kg/m
10 11
7 9 8
1 4
3 2
5 6
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
1 2 3
5 4
9
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
10 11 6 7 8
Threaded Rod Beam Clamp
Washer Nut Support Channel
Screw Set Washer Cable Tray Straight Connector
Screw Set Joint Plate
PGM8/1 ZK8/19
PP8 NSM8 CWP/CWOP40H40/05
SGKM6x12 PW6 KCP/KCOP400H60/3
LPP/LPOPH60 SGKM6x12 BL/BLO400
752208 650801
650444 650144 611105 651141 650844 160840 163111 651141 100140
2 2 8 8 1 2 2 2 2
16 1
Cable Tray Thickness 1.5 mm Max. Spacing of Supports 1.5 m.
Max. Safe Load Cable Tray 10 kg/m Max. Width of Cable Tray 400mm.
10
2
3
4 13
12
1 8
7 6
9
5 11
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
1 2 3
5 4
9
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
10 11 6 7 8
Threaded Rod Hold Down Clamp
Washer Nut
Washer Screw Set Support Channel
Cable Tray Straight Connector
Screw Set Joint Plate
PGM10/1 UDC PP10 NSM10
PW10 SMM10x60 CWP/CWOP40H40/05
KCP/KCOP400H60/3 LPP/LPOPH60
SGKM6x12 BL/BLO400
750806 651001
650544 650244
651044 650943 611105 160840 163111 651141 100140
2 2 8
2 2 2 2 2
16 1
8
12 Washer PW6 650884 2
13 Screw Set SGKM6x12 651141 2
XIX Example of Assembly Exceeding Standard
for Cables Distribution in Tray Attached to I-Beam by the Use of Beam Clamps ZK8/19, Ceiling to the
Important! Only one level of cable tray allowed
Example of Assembly Exceeding Standard for Cables Distribution in Cable Tray and on Ladder, Attached to I-Beam by the Use of Hold Down Clamp UDC
Important! Only one level of cable tray allowed
Cable Tray and Ladder Thickness 1.5 mm Max. Spacing of Supports 1.5 m Max. Safe Load Ladder 10kg/m Max. Safe Load Cable Tray 10 kg/m Max.Width of CableTray and Ladder 200mm
1 1
2
3 4
7 5
6 8
7 5
6 3 2
8 4
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
1 2 3
5 4
6
2
LDC/LDOCH60 2
Ladder Straight Connector
SGKM8x14 651241 8 Screw Set
ZM/ZMO 400700 2 Hold Down Clamp
461001
LIST OF ELEMENTS TO CONNECT 2 PCS OF LADDERS LIST OF ELEMENTS TO CREATE SUPPORT
8
ALTERNATIVE ASSEMBLY OF THE LADDERS
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
1 2 3
5 4
6
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
LPP/LPOPH60 SGKM6x12
2 2 12
1 163111 651141 Cable Tray
Straight Connector Screw Set Joint Plate
7
UDC 750806 2
Hold Down Clamp
KCP/KCOP200H60/3 161420
BL/BLO200 100120 CWP/CWOP40H40/05611105 1 Support Channel
DGOP200H60/3N 863023
UDC 750806 2
Hold Down Clamp
CWP/CWOP40H40/05611105 1 Support Channel
SMM10x60 650943 2 Screw Set
PW10 651044
Washer 2
Cable Tray and Ladder Thickness 1.5 mm Max. Spacing of Supports 1.5 m.
Max. Safe Load Ladder 10kg/m.
Max. Safe Load Cable Tray 10 kg/m Max. Width of Cable Tray and Ladder 200mm
1
3 2 4
5 7 6
8 9
10 16
15
11
12
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
1 2 3
5 4
6
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS and 2 PCS OF LADDERS
LIST OF ELEMENTS TO CREATE SUPPORT 7
12 11 10 8 9
2
LDC/LDOCH60 2
SGKM8x14 8
461001 651241 Ladder
Straight Connector Screw Set
ZM/ZMO 400700 2 Hold Down Clamp
LPP/LPOPH60 2
SGKM6x12 12
163111 651141 Cable Tray
Straight Connector Screw Set Joint Plate 1
2 DGOP200H60/3N 863023
UDC 750806 2
Hold Down Clamp
CWP/CWOP40H40/1 611110 1 Support Channel
KCP/KCOP200H60/3 161420
BL/BLO200 100120
PW10 651044
Washer 2
SMM10x60 650943
Screw Set 2
13 Washer PW6 650884 2
14 Screw Set SGKM6x12 651141 2
16 Screw Set SGKM8x14 651241 2
15 Washer PW8 650944 2
13 14
7 8
SMM10x60 650943 2 Screw Set
PW10 651044
Washer 2
9 Washer PW6 650884 2
10 Screw Set SGKM6x12 651141 2
10 Screw Set SGKM8x14 651241 2
9 Washer PW8 650944 2
9 10
9 10
Example of Assembly Exceeding Standard for Cables Distribution in Cable Tray and on Ladder, Attached to I-Beam by the Use of Hold Down Clamp UDC
Example of Assembly Exceeding Standard for Cables Distribution in Cable Tray,
Attached to I-Beam by the Use of Hold Down Clamp UDC
Example of Assembly Exceeding Standard for Cables Distribution - Cable Tray Fixed to Steel Profile 100x100
Width of Cable Tray 400 mm Cable Tray Thickness 1,0 mm Max. Spacing of Supports 1.5 m.
Max. Safe Load Cable Tray 10 kg/m
3
2
4
6
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
1 2
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
Cable Tray KGJ/KGOJ400H60/3 161216 2
CWP/CWOP40H40/02611102 1 Support Channel
SGKM6x12 651141 8 Screw Set
3
CWP/CWOP40H40/05611105 1 Support Channel
4
PGM10/1 651001 1 Threaded Rod
5
PP10 650544 16 Washer
6
NSM10 650244 16 Nut
7
SGKM6x12 651141 2 Screw Set
8
PW6 650844 2
Washer 9
1
5
7 8
9
Profile 100x100
XIX
Max. width of Cable Tray and Ladder 200 mm Cable Tray Thickness 1,0 mm
Ladder Material Thickness – 1.5 mm Max. Spacing of Supports 1.5 m Max. Safe Load Ladder 10kg/m Max. Safe Load Cable Tray 10 kg/m
1 4 3
13 14
8
2 5
6
12 9 10
11
7
Profile 100x100
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
1 2 3
5 4
6
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS and 2 PCS OF LADDERS
LIST OF ELEMENTS TO CREATE SUPPORT 7
12 11 10
Cable Tray KGJ/KGOJ200H60/3 161016 2
13
Washer PW6 650884 2
14
Screw Set SGKM6x12 651141 2
SGKM8x14 651241 2 Screw Set
LDC/LDOCH60 461001 2 Straight Connector
2 Ladder DUP/DUOP200H60/3N 466320
SGKM8x14 651241 8 Screw Set
SGKM6x12 651141 6 Screw Set
ZM/ZMO 400700 2 Hold Down Clamp
CWP/CWOP40H40/02611102 1 Support Channel
CWP/CWOP40H40/06611106 1 Support Channel
PGM10/1 651001 1 Threaded Rod
PP10 650544 8 Washer
NSM10 650244 8 Nut
8 9
Example of Assembly Exceeding Standard for Cables Distribution
- Cable Tray and Ladder Fixed to Steel Profile 100x100
Max. Width of Cable Tray 400 mm Cable Tray Thickness 1.5 mm Max. Spacing of Supports 1.5 m Max. Safe Load 10 kg/m
1
11
3 4
5
10 6
8
9
7
12
2
14 13
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
Cable Tray Straight Connector
Joint Plate
Threaded Rod Threaded Rod
Washer Nut Screw Set
Support Channel Screw Set 1
2 3
5 6
8 9 4
10 11
KCP/KCOP400H60/3 LPP/LPOPH60
BL/BLO400
PGM10/1 PGM8/01
PP10 NSM10 SGKM6x12
CWP/CWOP40H40/05 SGKM6x12
160840
650501 651001
650544 650244 611105 651141 651141 100140 163111
2 2 1
2 2
8 8 1 2 16
7 Trap. Ceiling Bracket WT/WTO120Ø11 730712 2
Washer
12 PW6 650844 2
13 Nut NSM8 650144 4
Washer
14 PP8 650144 4
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
Cable Tray
Threaded Rod Screw Set
Support Channel Screw Set 1
2 3
5 6
8 9 4
10
KCL/KCOL300H60/3 PGM8/1 SGKM6x12
CWP40H22/04 SGKM6x12
160830 650801
610204 651141 651141
2
2
1 2 7
7
Trap. Ceiling Bracket WT/WTO120Ø11 730712 2
Washer PW6 650844 2
Nut NSM8 650144 12
Washer PP8 650444 8
Washer PW8 650944 4
Maksymalna Width of Cable 300 mm Cable Tray Thickness 0,7 mm Max. Spacing of Supports 1.5 m Max. Safe Load 10 kg/m
7
5
4
6
1 2
3
8
9
10
Example of Assembly Exceeding Standard for Cables Distribution in Cable Tray assembled on Trapezoidal Ceiling Bracket WT/WTO120Ø11 to the trapezoid decking sheet
Example of Assembly Exceeding Standard
for Cables Distribution in Cable Tray assembled
on Trapezoidal Ceiling Bracket WT/WTO120Ø11
to the trapezoid decking sheet
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
1 2 3
7 5 4
8 6
KCP/KCOP400H60/3 2
LPP/LPOPH60 2
Cable Tray Straight Connector
BL/BLO400 1
Joint Plate
SGKM6x12 16
Screw Set
WPTKO400 800940 1 Bracket, set
SGKM6x12 2
Screw Set 651141
651141 100140 163111 160840
PSROM10x80 804100 2+1 Bolt Anchor
PW6 2
Washer 650844
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
Cable Tray Width 400 mm Cable Tray Thickness 1.5 mm Max. Spacing of Supports 1.5 m Max. Safe Load 20 kg/m Assembly without threaded rod
1 2
3
8 4
5
6
7
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
1 2 3
5 4
6
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
7 8
WWCT/WWCTO400 KCP/KCOP400H60/3
LPP/LPOPH60 SGKM6x12 BL/BLO400
PSROM10x80 SGKM6x12
PW6
1 2 2 16
1
1 2 2 713040 160840 163111 651141 100140
804100 651141 Bracket
Cable Tray Straight Connector
Screw Set Joint Plate
Screw Set Washer Bolt Anchor
4 2 3 1
5 6 7 8
Cable Tray Width 400 mm Cable Tray Thickness 1.5 mm Max. Spacing of Supports 1.5 m Max. Safe Load 20 kg/m Assembly without threaded rod
650884
XIX Example of Assembly Exceeding Standard for Cables Distribution in Tray to the Wall
without the Use of Threaded Rod Support
Example of Assembly Exceeding Standard for Cables Distribution in Tray to the Wall
without the Use of Threaded Rod Support
OPTIONALLY TO COMPLETE THE SET *
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
1 2 3
6*
4
7*
8*
9 5
11*
10
12 7*
8*
Cable Tray Screw Set
Threaded Rod
Washer Nut Rod Grip
Screw Set Screw Set Bolt Anchor
Drop-In Anchor Washer
Nut
TRSOM10 PP10 NSM10
2
1 1 4 4 1
2 2 2+1
1 2 2 Bracket
Rod Hanger
KCD/KCOD400H60/3 WMC/WMCO400
USV/USOV SGKM6x12
PGM10/1
PP10 NSM10 UPW/UPWO
SGKM8x14 SGKM6x12 PSROM10x80
160640 711140
750709 651141
651001
650544 650244 750100
651241 651141 804100
804800 650544 650244
8 1
1 2
4 7
8
5
3 10
6 11
9
Cable Tray Width 400 mm Cable Tray Thickness 1.2 mm Max. Spacing of Supports 1.5 m Max. Safe Load 10 kg/m
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
LIST OF ELEMENTS TO CONNECT 2 PCS OF CABLE TRAYS LIST OF ELEMENTS TO CREATE SUPPORT
1 2 3
5 6 7 4
Cable Tray Screw Set Support Channel
Screw Set Obejma do rur
KGJ/KGOJ400H60/3 SGKM6x12 CWP/CWOP40H40/07
SMM10x20 OBR35
161216 651141 804107 650743 753400
2 8 1 4 2
Screw Set SGKM6x12 651141 2
Washer PW6 650844 2
1
2 6
3
5 4 7
Cable Tray Width 400 mm Cable Tray Thickness 1,0 mm Max. Spacing of Supports 1.2 m Max. Safe Load Cable Tray 20 kg/m
Mounting threaded rod onto ceiling:
- indirectly through Rod Hanger USV/USOV with Bolt Anchor PSROM10 - directly with Drop-In Anchor - Steels TRSOM... without the use of Rod Hangers USV/USOV
=
*
12Example of Assembly Exceeding Standard for Cables Distribution in Cable Tray assembled on pipes in raised floor installation Example of Assembly Exceeding Standard
for Cables Distribution in Tray- to the Wall
and Ceiling
Example of Assembly Exceeding Standard for Cables Distribution - Ladder - to the Ceiling.
1 3 2 4
5
9 8
6
10 12
7
11
Ladder Width 400 mm
Ladder Material Thickness – 1.2 mm Max. Spacing of Supports 1.5 m Max. Safe Load 20 kg/m
Example of Assembly Exceeding Standard for Cables Distribution - Ladder - to the Ceiling.
1 3 2 4
9 8
6
10 12
7
11
5
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
OPTIONALLY TO COMPLETE THE SET *
LIST OF ELEMENTS TO CONNECT 2 PCS OF LADDERS LIST OF ELEMENTS TO CREATE SUPPORT
DGOD400H60/3E 2
LDC/LDOCH60E 2
Ladder Straight Connector
SGKM8x14E 661030 8 Screw Set
ZM/ZMOE 300700 2 Hold Down Clamp
PGM10/1E 2
USV/USOVE 2
652101 805400 Threaded Rod
Rod Hanger
PP10E 652300 8 Washer
NSM10E 652200 8 Nut
CWP/CWOP40H40/05E805305 1 Support Channel
SGKM8x14E 661030 2 Screw Set
867240 361001
PSROM10x80E 804101 2 Bolt Anchor
PW8E 660944 2 Washer
TRSOM10E 804801 Drop-In Anchor
PP10E NSM10E
652300 652200 Washer
Nut
2 4 4 1
2 3
5 6 7*
8*
4
9*
10
12*
11
13 8*
9*
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
OPTIONALLY TO COMPLETE THE SET *
LIST OF ELEMENTS TO CONNECT 2 PCS OF LADDERS LIST OF ELEMENTS TO CREATE SUPPORT
2 2 Ladder
Straight Connector Screw Set 8 Hold Down Clamp 2
2 2 Threaded Rod
Rod Hanger
8 Washer
Nut 8
1 Support Channel
Screw Set 2
2 Bolt Anchor
Washer 2
DGOP400H60/3N LDC/LDOCH60
SGKM8x14 651241 ZM/ZMO 300700
PGM10/1 USV/USOV
651001 750709 PP10 650544 NSM10 650244 CWP/CWOP40H40/05 611105
SGKM8x14 651241 863043 461001
PSROM10x80 804100
PW8 650944
Washer Nut Drop-In Anchor
NSM10 PP10
TRSOM10 804800 650544 650244
2 4 4 1
2 3
5 6 7*
8*
4
9*
10
12*
11
13 8*
Ladder Width 400 mm 9*
Ladder Material Thickness – 1.5 mm Max. Spacing of Supports 1.5 m Max. Safe Load 20 kg/m
XIX
Mounting threaded rod onto ceiling:
- indirectly through Rod Hanger USV/USOV with Bolt Anchor PSROM10 - directly with Drop-In Anchor - Steels TRSOM... without the use of Rod Hangers USV/USOV
=
Mounting threaded rod onto ceiling:
- indirectly through Rod Hanger USV/USOV with Bolt Anchor PSROM10 - directly with Drop-In Anchor - Steels TRSOM... without the use of Rod Hangers USV/USOV
=
*
13*
13Ladder Width 400 mm
Ladder Material Thickness – 1.2 mm Max. Spacing of Supports 1.5 m Max. Safe Load 20 kg/m
Example of Assembly Exceeding Standard for Cables Distribution - Ladder - to the Ceiling.
Ladder Width 400 mm
Ladder Material Thickness – 1.2 mm Max. Spacing of Supports 1.5 m Max. Safe Load 20 kg/m
Example of Assembly Exceeding Standard for Cables Distribution - Ladder - to the Ceiling.
1 2 3
13
4
7
12 8
5 14
11
6 9 10
1 2 3
13
5 4
7
12 8
14
11
6 9 10
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
OPTIONALLY TO COMPLETE THE SET *
LIST OF ELEMENTS TO CONNECT 2 PCS OF LADDERS LIST OF ELEMENTS TO CREATE SUPPORT
1 2 3
7 5 4
8*
9*
10*
11 6
13 12
14*
15 9*
10*
2 2 8 2 1 1 1 1 4 4 4 1 2
1 2 2 2+1 DGOD400H60/3N
LDC/LDOCH60 SGKM8x14
ZM/ZMO WWS/WWSO400
867040 461001 651241 400700 710540 Ladder
Straight Connector Screw Set Hold Down Clamp
Bracket
UPW/UPWO 750100 Rod Grip
PGM10/1 USV/USOV
651001 750709 Threaded Rod
Rod Hanger
PP10 650544 Washer
NSM10 650244 Nut
SGKM8x14 651241 Screw Set
WPCW/WPCO400 750640 Ceiling Bracket
SMM10x30 650843 Screw Set
PSROM10x80 804100 Bolt Anchor
TRSOM10 804800 Drop-In Anchor
PP10 NSM10
650544 650244 Washer
Nut
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
OPTIONALLY TO COMPLETE THE SET *
LIST OF ELEMENTS TO CONNECT 2 PCS OF LADDERS LIST OF ELEMENTS TO CREATE SUPPORT
10*
1 2 3
7 5 4
8*
9*
11 6
13 12
14*
15 9*
10*
Ladder DGOD400H60/3E 2
LDC/LDOCH60E 2
SGKM8x14E 8
ZM/ZMOE 2
WMC/WMCO400E 1
867240 361001 661030 300700 740040 Straight Connector
Screw Set Hold Down Clamp
Bracket
UPW/UPWOE 803301 1 Rod Grip
PGM10/1E 1
USV/USOVE 1
652101 805400 Threaded Rod
Rod Hanger
PP10E 652300 4 Washer
NSM10E 652200 4 Nut
SGKM8x14E 661030 4 Screw Set
WPCW/WPCO400E 750140 1 Ceiling Bracket
SMM10x30E 652600 2 Screw Set
PSROM10x80E 804101 Bolt Anchor
TRSOM10E 804801 1 Drop-In Anchor
PP10E 2
NSM10E 2
652300 652200 Washer
Nut
2+1 Mounting threaded rod onto ceiling:
- indirectly through Rod Hanger USV/USOV with Bolt Anchor PSROM10 - directly with Drop-In Anchor - Steels TRSOM... without the use of Rod Hangers USV/USOV
=
Mounting threaded rod onto ceiling:
- indirectly through Rod Hanger USV/USOV with Bolt Anchor PSROM10 - directly with Drop-In Anchor - Steels TRSOM... without the use of Rod Hangers USV/USOV
=
*
15*
15Ladder Width 400 mm
Ladder Material Thickness – 1.5 mm Max. Spacing of Supports 1.5 m Max. Safe Load 20 kg/m
Ladder Width 400 mm
Ladder Material Thickness – 1.5 mm Ladder Rungs Spacing 300 mm Max. Spacing of Supports 1.5 m Max. Safe Load 20 kg/m
Example of Assembly Exceeding Standard for Cables Distribution - Ladder - to the Ceiling.
1 2 3
13
5 4
7
12 8
14
11
6 9 10
Example of Assembly Exceeding Standard for Cables Distribution - Ladder - to the Ceiling.
1 2 3
5
4 7
12 8
14
11
6 9 13 10
300
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
OPTIONALLY TO COMPLETE THE SET *
LIST OF ELEMENTS TO CONNECT 2 PCS OF LADDERS LIST OF ELEMENTS TO CREATE SUPPORT
1 2 3
7 5 4
8*
9*
10*
11 6
13 12
14*
15 9*
10*
Ladder 2
2 8 2 1 Straight Connector
Screw Set Hold Down Clamp
Bracket Rod Grip 1
1 1 Threaded Rod
Rod Hanger
4 Washer
Nut 4 Screw Set 4 Ceiling Bracket 1
2 Screw Set
Bolt Anchor
TRSOM10 804800 1 Drop-In Anchor
PP10 2
NSM10 2
650544 650244 Washer
Nut
2+1 DGOP400H60/3N
LDC/LDOCH60 SGKM8x14
ZM/ZMO WMC/WMCO400
863043 461001 651241 400700 711140 UPW/UPWO 750100
PGM10/1 USV/USOV
651001 750709 PP10 650544 NSM10 650244 SGKM8x14 651241 WPCW/WPCO400 750640 SMM10x30 650843 PSROM10x80 804100
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
OPTIONALLY TO COMPLETE THE SET *
LIST OF ELEMENTS TO CONNECT 2 PCS OF LADDERS LIST OF ELEMENTS TO CREATE SUPPORT
1 2 3
7 5 4
8*
9*
10*
11 6
13 12
14*
15 9*
10*
2 2 8 2 1 1 1 1 4 4 4 1 2
1 2 2 2+1 DUP/DUOP400H60/3
LDC/LDOCH60 SGKM8x14
ZM/ZMO
466340 461001 651241 400700 Ladder
Straight Connector Screw Set Hold Down Clamp
Bracket
UPW/UPWO 750100 Rod Grip
PGM10/1 USV/USOV
651001 750709 Threaded Rod
Rod Hanger
PP10 650544 Washer
NSM10 650244 Nut
SGKM8x14 651241 Screw Set
WPCW/WPCO400 750640 Ceiling Bracket
SMM10x30 650843 Screw Set
PSROM10x80 804100 Bolt Anchor
TRSOM10 804800 Drop-In Anchor
PP10 NSM10
650544 650244 Washer
Nut
WMC/WMCO400 711140
XIX
Mounting threaded rod onto ceiling:
- indirectly through Rod Hanger USV/USOV with Bolt Anchor PSROM10 - directly with Drop-In Anchor - Steels TRSOM... without the use of Rod Hangers USV/USOV
=
Mounting threaded rod onto ceiling:
- indirectly through Rod Hanger USV/USOV with Bolt Anchor PSROM10 - directly with Drop-In Anchor - Steels TRSOM... without the use of Rod Hangers USV/USOV
=
*
15*
153 1 2
6
4
9
8
7
10
5
Assembly without threaded rod Rungs spacing 300mm
Ladder Material Thickness – 1.5 mm Max. Spacing of Supports 1.5 m Max. Safe Load Ladder 20 kg/m
300
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
1 2 3
9 5 4
10 6
2
LDC/LDOCH60 2
Ladder Straight Connector
SGKM8x14 651241 8 Screw Set
ZM/ZMO 400700 2 Hold Down Clamp
461001
LIST OF ELEMENTS TO CONNECT 2 PCS OF LADDERS LIST OF ELEMENTS TO CREATE SUPPORT
WWCT/WWCTO400 1
Bracket
SGKM8x14 Screw Set
DUP/DUOP400H60/3 466340
7 8
2 651241
1 WPCE/WPCEO800
Ceiling Bracket
713040
700400 721580 651443 804100 BR70
SMM10x120 PSROM10x80 Spacer
Screw Set
Bolt Anchor 2
1 1
No. of Pcs.
in Single Suspension CODE Catalogue PRODUCT No.
No.
LIST OF ELEMENTS TO CONNECT 2 PCS OF LADDERS LIST OF ELEMENTS TO CREATE SUPPORT
Ladder Straight Connector
Screw Set
Threaded Rod Threaded Rod
Washer Nut Hold Down Clamp
Support Channel Screw Set 1
2 3
5 6
8 9 4
10 11
DGOP400H60/3N LDC/LDOCH60
SGKM8x14
PGM10/1 PGM8/1
PP10 NSM10 ZM/ZMO
CWP/CWOP40H40/05 SGKM8x14
863043
650801 651001
650544 650244 611105 651241 400700 651241 461001
2 2 8
2 2
8 8 1 2 2
7 Trap. Ceiling Bracket WT/WTO120Ø11 730712 2
3 1 2
4
10 11
9 8
5 6
7
12
Washer
12 PW8 650944 2
Ladder Material Thickness – 1.5 mm Max. Spacing of Supports 1.5 m Max. Safe Load Ladder 20 kg/m
13 Nut NSM8 650144 4
Washer
14 PP8 650144 4