Systems of Wall-Mount Supports
Bracket WSS...
Example of Fittings in the Section of Wall-Mount Supports
Bracket WFL/WFLO...
Bracket WPL...
Bracket WMCT...
Variable Bracket WU/WUO...
Bracket WSZ...
Angle Bracket TM Fastening Bracket
UT
Bracket WWT...
Bracket WFC/WFCO...
1
XII XII
XII
Thickn. (ga) ≠ [mm]:0,7 1,0 1,2 1,5 2,0
2
XII XII
Bracket
Bracket
WFML
WFL/WFLO
720111
720121 720131 720141 Length
L
mm
Catalogue CODE No.
WFML...
Allowable Tensile Load Fmax[kN] 1pc
kg Qty
720116 150
200 240 340 450
0,40 0,35 0,30 0,25 0,18
0,16 0,19 0,22 0,29 0,35
30
30 30 20 30 720112
127 0,45 0,13 30
WFML100
WFML200 WFML300 WFML400 WFML150 WFML50
Length
L
mm
Catalogue CODE No.
WFL/WFLO...
170 0,30 720110
Allowable Tensile Load Fmax[kN]
1,40 30
1pc
kg Qty
260 0,90 0,43 720120 30
220 1,10 0,37 720115 30
Height
H
mm 120
130 130
360 0,58 720130
460 0,72 720140
0,50 0,37
30 20
560 0,27 0,85 720150 20
660 0,17 1,00 720160 20
130 130 130 130 WFL/WFLO300
WFL/WFLO400 WFL/WFLO500 WFL600 WFL/WFLO100 WFL/WFLO200 WFL/WFLO150
Length
L
mm
Catalogue CODE No.
WW...
60
WW50 0,05 710405
Height
H
mm 48 110
WW100 70 0,08 710410
160
WW150 70 0,12 710415
210
WW200 73 0,22 710420
315
WW300 95 0,40 710430
415
WW400 95 0,57 710440
515
WW500 95 0,80 710450
615
WW600 95 0,91 710460
Allowable Tensile Load
Fmax[kN]
0,85 0,90 1,00
1,05 1,25 1,15
1,05 0,95
100 100 100
100 50 30
30 30 1pc
kg Qty
Length
L
mm
Catalogue CODE No.
Height
H
mm 122
WWS/WWSO100 80 0,19 710510
WWS/WWSO200 90 0,38 710520
WWS/WWSO300 115 0,77 710530 WWS/WWSO400 115 1,20 710540
WWS500 115 1,22 710550
WWS600 WWS700 WWS800 WWS900 WWS1000
1,33 1,48 2,21 2,93 3,66
710560 710570 710580 710590 710511 115
115 140 140 140
Allowable Tensile Load
Fmax[kN]
1,20
1,40
1,90 1,80 1,60 1,50 1,40 1,80 1,60 1,40 222
322 422 522 622 722 822 922 1022
WWS/WWSO...
50
30
30 20 20 20 10 10 10 10 1pc
kg Qty
WW
WWS/WWSO
APPLICATIONS
Supporting cable trays and ladders, pipes and other system's components.
E-90
E-90
- Detailed info in section XIX
E-90
≠ 1,5mm
≠ 2,0 mm
≠ 1,5 mm
≠ 2,0 mm
≠ 2,5 mm
≠ 2,0 mm
≠ 2,5 mm
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 (SG) Available finishes:
F- steel, hot-dip galv.
to PN-EN ISO 1461:2011 (HDG)
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
172
WWS/WWSO150 80 1,30 0,28 710515 50
Protective Cap
MATERIAL
Polyethylene. Standard colour: green to RAL 6029.
Available finishes:
white to RAL 9010, silver to RAL 9006.
APPLICATIONS
Protecting installers against cut from steel edges; Improving overall product appearance;
assembled at the end of pipe bracket NOF...
NOFM
Catalogue CODE No.
900667
NOFM 100
Qty
NOF
Catalogue CODE No.
900666
NOF 100
Qty IMPORTANT! Fits with brackets: WFML and WFMC.
NOFM
NOF Note. Hot dip galvanizing (PN-EN ISO 1461:2011 (HDG)) and diffusion galvanizing method (PN-EN ISO 17668:2016) for elements up to 200mm will be replaced with zink flake coating method PN-EN ISO 10683:2014-09
L Ø8-6,5x25
115
36
L 7-11x26
11x25
H
60
17
H
26
9x18 L
7-9x26
L 7-9x26
H
10x20
For mechanical properties of screws and anchors see Section IX page 11
IMPORTANT! Non-standard lengths of brackets available to special order
IMPORTANT! Non-standard lengths of brackets available to special order
For installation we recommend to use spacer PD9, see page 13
IMPORTANT! Non-standard lengths of brackets available to special order
1/2 L F
1/2 L F
IMPORTANT! Fits with brackets: WFL/WFLO and WFC/WFCO.
15281935 F F
For installation we recommend to use spacer PD11, see page 13
IMPORTANT! Non-standard lengths of brackets available to special order
Thickn. (ga) ≠ [mm]:0,7 1,0 1,2 1,5 2,0
3
XII XII
NOTE
Brackets WS, WZS, WSZ fit to the following sections:
CW...40H22, CW...40H40, CW...40H47, C...40H20, C...50H30, C...55H50, CT70H50, CWT40H60, CWT40H80, CM...40H40,CM...40H60, CM...50H50, CMT40H80, CMT50H100, CTM...40H40, CTM...40H60, CTM...50H50, CTMT80H80, CTMT50H100, CTMT100H100, PWS, PSW, WSP, WPCW/WPCO, WPCE/WPCEO, WPT, WWT, WPL, WTL.
Example of how to attach Brackets WS, WZS, WSZ to Support Channel CWC40H40 Example of how
to attach PWS to Bracket WZS and WS WSZ
Bracket
WS
Example of how to attach PWS to Bracket WWS/WWSO
Smooth adjustment Application Example of PKW
APPLICATIONS
Adapter allows to assembly brackets at angle.
Possibility to use one size of bracket to different cable tray and ladder wideness
Angle adapter
PKW
Catalogue CODE No.
PKW 0,39 710001
PKW
10 1pc
kg Qty
≠ 2,0 mm APPLICATIONS
Supporting cable trays and ladders, pipes and other system's components.
WZSM
Length
L
mm
Catalogue CODE No.
115
WZSM100 0,13 710211
WZSM150 0,18 710216
WZSM200 0,25 710221
Allowable Tensile Load
Fmax[kN]
0,90 0,85 0,80 165 215
WZSM...
50 30 30 1pc
kg Qty
≠ 2,0 mm
N
65
WZSM50 0,90 0,08 710206 50
PWS/01 110
Catalogue CODE No.
PWS...
PWS/02 PWS/03 PWS/04 PWS/05 PWS/1 PWS/2 PWS/3
Length Length
L
mm
200 300 400 500 1000 2000 3000
1pc
kg Qty
0,09 0,23 0,33 0,43 0,53 1,06 2,01 3,10
740110 740120 740130 740140 740150 740111 740112 740113
100 30 30 30 30 30 30 10 10 8 8 8 8 Length
L
mm
Catalogue CODE No.
110 160 WSZ100
WSZ150
0,11 0,34
710310 710315
WSZ200 0,37 710320
WSZ300 0,46 710330
WSZ400 0,55 710340
WSZ500 0,68 710350
WSZ600 0,85 710360
Allowable Tensile Load
Fmax[kN]
1,30 1,20 1,00 0,90 0,85 0,75 0,70 210 310 410 510 610
50 50 30 30 30 20 20 1pc
kg Qty
WSZ...
≠ 2,0 mmLength
L
mm
Catalogue CODE No.
110 160 WZS100
WZS150
0,16 0,21
710210 710215
WZS200 0,29 710220
WZS300 0,63 710230
WZS400 0,78 710240
WZS500 0,87 710250
WZS600 1,02 710260
Allowable Tensile Load
Fmax[kN]
1,30 1,20 1,00 0,85 0,80 0,75 0,70 210 310 410 510 610
WZS...
50 50 30 30 30 20 20 1pc
kg Qty
≠ 2,0 mm Length
L
mm
Catalogue CODE No.
110 60
0,07 0,04
710110 710105
210 160
0,17 0,13
710120 710115
310 0,28 710130
410 510
0,35 0,45
710140 710150 Allowable
Tensile Load Fmax[kN]
0,60 0,65
0,60 0,75
0,45 0,35 0,30
WS...
WS100 WS50
WS200 WS150
WS300 WS400 WS500
100 50
50 50 50 30 30 1pc
kg Qty
≠ 1,5 mm
≠ 2,0 mm
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 (SG) Available finishes:
F- steel, hot-dip galv.
to PN-EN ISO 1461:2011 (HDG)
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
APPLICATIONS
Attaching Brackets WS, WZS, WSZ.
Fixing Channel
PWS
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 (SG) Available finishes:
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
Assembly in the bracket’s 3 openings IMPORTANT! Non-standard lengths of brackets available to special order.
WZS
7-9x30 L 24
10
70
L 26
22
7x35 10
Ø6,5
IMPORTANT! Non-standard lengths of brackets available to special order.
Assembly in the bracket’s 2 openings WZS
7-9x26 L 90
27
10
1/2 L F
12x23 Ø9
73
15034
By assembly of the same bracket at 3 different surfaces of the adapter we have 3 different support lenghts. It means that on bracket 400mm we can assembly cable tray or ladder width a=400. b=200 or c=100 mm
b ac
1/2 L F 1/2 L F
43
IMPORTANT! Non-standard lengths of brackets available to special order.
L
27
52
10 7-9x35
9
40
32 9x23
1950
12x25
L
XII
Length mm
L
Catalogue CODE No.
WTL...
115
WTL100 0,24 710810
WTL150 0,29 710815
WTL200 0,38 710820
WTL300 0,52 710830
WTL400 0,65 710840
WTL500 0,79 710850
Allowable Tensile Load
Fmax[kN]
165 215 315 415 515
1,90 1,80 1,70 1,30 1,00 0,80
50 50 50 30 30 30 1pc
kg Qty
Length mm
L
Catalogue CODE No.
WPL...
115
WPL100 0,20 710710
WPL150 0,27 710715
WPL200 0,34 710720
WPL300 0,49 710730
WPL400 0,61 710740
WPL500 0,75 710750
Allowable Tensile Load Fmax[kN]
1,90 1,80 1,70 1,30 1,00 0,80 165 215 315 415 515
50 50 50 30 30 30 1pc
kg Qty
Thickn. (ga) ≠ [mm]:0,7 1,0 1,2 1,5 2,0
4
XII XII
Bracket
WPL
IMPORTANT! Non-standard lengths of brackets available to special order.
For mechanical properties of screws and anchors see Section XI page 15
WTL
IMPORTANT! Non-standard lengths of brackets available to special order.
For mechanical properties of screws and anchors see Section XI page 15
Protective Cap
1/2 L F 1/2 L F
APPLICATIONS
Supporting cable trays and ladders, pipes and other systems' components, particularly where installation of cable runs is space restricted (e.g. above a suspended ceiling)
MATERIAL Hot-dip galv. steel PN-EN ISO 1461:2011 Available finishes:
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
Catalogue CODE No.
NOW40x22
760100 Height
H
mm 22 Width
a
mm 40
NOW40x22 100
Qty MATERIAL
Polyethylene. Standard colour: green to RAL 6029.
Available finishes:
white to RAL 9010, silver to RAL 9006.
APPLICATIONS
Protecting installers against cut from steel edges; Improving overall product appearance NOW40x22
- Detailed info in section XIX
E-90
Variable Bracket
Length
L
CODE
WU/WUO...
mm
Catalogue No.
Allowable Tensile Load Fmax[kN]
50 50 30 1pc
kg
20 WU/WUO200
WU/WUO300 WU/WUO400
245 345 445 WU/WUO100 145
20 20 WU500
WU600
545 645
1,00 0,85 0,70
0,45 0,55
0,34 0,45 0,22
0,64 805210 805220 805230 805240 805250 805260
Qty
0,30 0,94 0,79
IMPORTANT! Non-standard lengths of brackets available to special order.
APPLICATIONS
Supporting cable trays and ladders, pipes and other system's components WU/WUO
E-90
Application Example of WU/WUO
PSR
USV/USOV
PGM10
UPW/UPWO WU/WUO
Length
L
mm
Catalogue CODE No.
712315 712320 712330 WSU150
WSU200 WSU300
190 240
340
WSU...
0,35 0,42
0,85
50 30
30 1pc
kg Qty
Bracket
WSU...
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 (SG) Available finishes:
F- steel, hot-dip galv.
to PN-EN ISO 1461:2011 (HDG) E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
APPLICATIONS Suspending cable runs.
Height
H
mm
75 75
105
712310
WSU100 75 140 0,27 50
1,30 1,40
1,90 1,20 Allowable Tensile Load Fmax[kN]
N
Note. Hot dip galvanizing (PN-EN ISO 1461:2011 (HDG)) and diffusion galvanizing method (PN-EN ISO 17668:2016) for elements up to 200mm will be replaced with zink flake coating method PN-EN ISO 10683:2014-09
L
40
95
40 22 13x20
12x25
L
40
95
40 22 13x20
12x25
1/2 L F L
7-9x27 29
35 Ø11
6464
712340 WSU400
WSU500
440 540
1,08 1,37
20 20 105
115
1,80 1,60
712360 WSU600 115 640 1,50 1,59 20
FEATURES & BENEFITS:
- assembly to the wall or to the bracket using 1 screw only - increased width allows for assembly to the open part of Support Channel 40 mm and 41 mm.
- bracket adapted to Cable Tray assembly with the use of Clamp
(Clamps soon available in the offer); no screws are needed
Example of cable tray assembly on the bracket WSU...
Example of WSU... bracket assembly to U-profile / ceiling bracket, with a screw SGKM8... or SGKM10...
to the open part
of U-profile / ceiling bracket, with a screw SRM8...
or SRM10...
directly to the wall with expansion bolt PSRM8... or PSRM10...
L
H
41
9x18
7-9x25-35 11x20
712350
≠ 2,0 mm
≠ 2,5 mm
Length
L
mm
Catalogue CODE No.
115
WWT100 0,51 711010
WWT150 0,60 711015
WWT200 0,69 711020
WWT300 0,96 711030
WWT400 1,15 711040
WWT500 1,37 711050
WWT600 WWT700 WWT800 WWT900 WWT1000
1,43 1,82 1,97 2,20 2,43
711060 711070 711080 711090 711011 Allowable
Tensile Load Fmax[kN]
165 215 315 415 515 615 715 815 915 1015
3,00 2,50 2,00 1,70 1,60 1,40 1,30 1,20 1,10 1,00 0,90
30 30 30 30 30 20 10 8 8 8 8 1pc
kg Qty
Length mm
L
Catalogue CODE No.
115 710910
710915 710920 710930 710940 710950 WPT/WPTO100
WPT150 WPT200 WPT300 WPT400 WPT500 WPT600 WPT700 WPT800 WPT900 WPT1000
0,48 0,57 0,65 0,92 1,12 1,33 1,39 1,78 1,93 2,16 2,38
710960 710970 710980 710990 710911 Allowable
Tensile Load Fmax[kN]
165 215 315 415 515 615 715 815 915 1015
3,00 2,50 2,00 1,70 1,60 1,40 1,30 1,20 1,10 1,00 0,90
30 30 30 30 20 20 20 8 8 8 8 1pc
kg Qty
WPT/WPTO...
WWT...
IMPORTANT! Non-standard lengths of brackets available to special order.
For mechanical properties of screws and anchors see Section XI page 15
IMPORTANT! Non-standard lengths of brackets available to special order.
For mechanical properties of screws and anchors see Section XI page 15
WWT WPT/WPTO
Thickn. (ga) ≠ [mm]:0,7 1,0 1,2 1,5 2,0
5
XII XII
Bracket
APPLICATIONS
Supporting cable trays and ladders, pipes and other systems' components, particularly where installation of cable runs is space restricted (e.g. above a suspended ceiling)
MATERIAL Hot-dip galv. steel PN-EN ISO 1461:2011 Available finishes:
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
WPT
WTL
WTL
Possibility to use brackets both in the vertical and horizontal plane
WPT
WWT WWT Example of Versatility of Brackets WTL and WWT, Particularly Where Vertical Multi-Level (Multi-Tier) Formation in Close Proximity Proves Necessary
Wysięgnik WMC Śruba SMM10x20 UDC
WWT WSZ WWT
Application Example of Combined Bracket WWT, That Can Also Be Used As a Ceiling Bracket
- Detailed info in section XIX
E-90
E-90
Protective Cap
MATERIAL
Polyethylene. Standard colour: green to RAL 6029.
Available finishes:
white to RAL 9010, silver to RAL 9006.
APPLICATIONS
Protecting installers against cut from steel edges; Improving overall product appearance NOW40x40
NOW40x40
Catalogue CODE No.
760400 Height
H
mm 40 Width
a
mm 40
NOW40x40 100
Qty 40
L
40
40 110
12x25 13x20 L
40
40
40 110
12x25 13x20
1/2 L F 1/2 L F
8080
Length mm
L
Catalogue CODE No.
711720 711730 711740 WWB200
WWB300 WWB400
215 315 415
WWB...
0,40 0,75 1,20
10 10 10 1pc
kg Qty
Bracket
WWB
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 (SG) Available finishes:
F- steel, hot-dip galv.
to PN-EN ISO 1461:2011 (HDG) E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
APPLICATIONS
Suspending cable runs. Suited for assembly on the WPCB… bracket
Height mm
H
90 115 115
711710
WWB100 80 115 0,20 10
1,40 1,90 1,80 1,20 Allowable Tensile Load Fmax[kN]
N
9x18
H
7-9x35 L
Assembly of the WWB bracket on the WPCB support.
PSRM10
WPCB
SGKM10x20 WWB
XII
CWC40H40
Length
L
mm
Catalogue CODE No.
WMCN...
Height
H
mm 115
WMCN100 65
WMCN150 65
WMCN200 65
Allowable Tensile Load
Fmax[kN]
165 215
50 50 30 1pc
kg 712010 0,17 1,5 1,4 1,4 1,4 1,3 1,3
0,20 0,24
712015 712020
WMCN300 75
WMCN400 75
WMCN500 90
315 415 515
30 20 20 0,40
0,60 0,86
712030 712040 712050 WMCN600 615 90 1,3 1,00 712060 20
Qty
Length mm
L
Catalogue CODE No.
WMC/WMCO...
Height mm
H
115
WMC/WMCO100 95 0,22 711110 WMC/WMCO150 95 0,29 711115 WMC/WMCO200 95 0,36 711120 WMC/WMCO300 120 0,43 711130 WMC/WMCO400 120 0,83 711140 WMC/WMCO500 140 0,96 711150 WMC/WMCO600
WMC700 WMC800 WMC900 WMC1000
1,15 1,87 2,27 2,51 2,75
711160 711170 711180 711190 711111 140
140 155 155 155
Allowable Tensile Load
Fmax[kN]
3,80 3,65 3,50 3,20 3,10 3,00 2,60 2,00 1,90 1,80 1,70 165
215 315 415 515 615 715 815 915 1015
50 50 50 30 30 20 20 4 4 4 4 1pc
kg Qty
Thickn. (ga) ≠ [mm]:0,7 1,0 1,2 1,5 2,0
6
XII XII
WMCN
Rod Grip Bracket
IMPORTANT! Upgraded Bracket WMCN.
WMCN is a new, more economical version of WMC/WMCO.
IMPORTANT! Non-standard lengths of brackets available to special order. For mechanical properties of screws and anchors see Section XI page 15
IMPORTANT! Non-standard lengths of brackets available to special order. For mechanical properties of screws and anchors see Section XI page 15
WMC/WMCO
WWCN
WWC
WWCN300 155
WWCN400 155
WWCN500 170
WWCN600 170
315 415 515 615
20 20 10 10 0,47
1,8 0,75 1,8
0,98 1,7
1,10 1,7
WWCN200 215 140 1,8 0,29 712120 50 712130 712140 712150 712160 Length
L
CatalogueNo.CODE
WWCN...
Height
H
Allowable Tensile Load
Fmax[kN]
mm
mm 1pc
kg Qty
WWCN100 115 140 2,0 0,20 712110 50
IMPORTANT! Upgraded Bracket WWCN. WWCN is a new, more economical version of WWC.
IMPORTANT! Non-standard lengths of brackets available to special order. For mechanical properties of screws and anchors see Section XI page 15
Length
L
CatalogueNo.CODE
WWC...
Height
H
WWC200 175 0,59 711220
WWC300 175 0,80 711230
WWC400 190 1,17 711240
WWC500 190 1,42 711250
WWC600 WWC700 WWC800 WWC900 WWC1000
1,81 2,09 3,23 3,88 4,25
711260 711270 711280 711290 711211 190
190 255 255 255
Allowable Tensile Load
Fmax[kN]
4,0 4,0 3,5 3,5 3,5 3,0 3,0 3,0 2,5 215
315 415 515 615 715 815 915 1015
mm mm
30 20 20 10 10 4 4 4 4 1pc
kg Qty
IMPORTANT! Non-standard lengths of brackets available to special order. For mechanical properties of screws and anchors see Section XI page 15
UPW/UPWO
Catalogue CODE No.
750100
UPW/UPWO 100
Qty UPW/UPWO
APPLICATIONS
Alternative to attach threaded rod support at the end of the bracket to enhance their mechanical properties. To be used with WWT, WWC, WWCH, WMCH.
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 (SG) Available finishes:
F- steel galvanized using zinc flake coating method PN-EN ISO 10683:2014-09 L- powder coating in a full range of colours (PC) (info p. 4)
MATERIAL Hot-dip galv. steel PN-EN ISO 1461:2011 Available finishes:
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
APPLICATIONS
Supporting cable trays and ladders, pipes, and other system's components under very heavy load
E-90
E-90
- Detailed info in section XIX
E-90
Strong
Strong Note. Hot dip galvanizing (PN-EN ISO 1461:2011 (HDG)) and diffusion galvanizing method
(PN-EN ISO 17668:2016) for elements up to 200mm will be replaced with zink flake coating method PN-EN ISO 10683:2014-09
E-90
11x20
H
L
9x18 28
40
25
Ø12 95
25 9x18
1/2 L F
H
L
9x18 28
40 13x20
H
L
9x18 28
40
11x18
H
L
9x18 28
40
13x20 1/2 L F 1/2 L F
1/2 L F 7-9x26 7-9x26
7-9x26
7-9x26
2517
1818165216
Thickn. (ga) ≠ [mm]:0,7 1,0 1,2 1,5 2,0
7
XII XII
Bracket
WMCT Length
mm
L
Catalogue CODE No.
WMCT500 WMCT400 WMCT300 WMCT200
WMCT...
Allowable Tensile Load
Fmax[kN] 1pc
kg Qty
WMCT600 215 315 415 515 615
Height mm
H
70 80
110 130
0,49 0,70 1,11 1,51 1,94
711921 3,3
3,3 3,1 3,0 2,7
10 8 6 1 1 711931 711941 711951 711961 WMCT100 115 60 3,3 0,49 711911 10
WMCT700 715 2,4 2,40 711971 1 WMCT800
WMCT900 815 915
150 160
2,80 3,20 2,2 2,0
1 1 711981 711991 WMCT1000 1015 2,0 3,67 711901 1
140
170 100
MATERIAL Hot-dip galv. steel PN-EN ISO 1461:2011 Available finishes:
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
WWV WWCT/WWCTO
Length
L
mm
Catalogue CODE No.
WWCT500 WWCT/WWCTO400 WWCT/WWCTO300 WWCT/WWCTO200
WWCT/WWCTO...
Allowable Tensile Load
Fmax[kN]1pc
kg Qty
WWCT600 WWCT800 WWCT700
WWCT1000 WWCT900
210 310 410 510 610 710 810
Height
H
mm 90 110 130 145 165 185 195
0,70 0,95 1,49 1,70 2,38 2,60 3,38 910
1010 205 225
713020 713030 713040 713050 713060 713070 713080 713090 713000 5,50
5,50 5,00 5,00 4,50 4,50 4,00 4,00 4,00
10 8 6 1 1 1 1 1 1 3,71
4,45
WWV
CODE LengthL
CatalogueNo.Height
H
WWV200 175 1,16 711920
WWV300 175 1,49 711930
WWV400 195 2,42 711940
WWV500 195 2,88 711950
WWV600 WWV700 WWV800
4,17 4,77 5,35
711960 711970 711980 250
250 250
Allowable Tensile Load Fmax[kN]
6,5 6,5 6,5 6,5 5,0 5,0 5,0 215
315 415 515 615 715 815
mm mm
20 10 10 10 4 4 4 1pc
kg Qty
WWV...
DSC400H200
PWCP
UD3
WWCT400 ZM + SGM8x14 Example Assembly with an Application of Brackets WWCT on I-beams
E-90
- Detailed info in section XIX
E-90
Strong
Strong
Strong
E-90
For mechanical properties of screws and anchors see Section XI page 15
9x18 30
40 13x20
H
7-9x34 L
L
30
50 13x20
H
For mechanical properties of screws and anchors see Section XI page 15
Strength values refer to concrete class B20
IMPORTANT! Non-standard lengths of brackets available to special order
FEATURES & BENEFITS:
- wall-mount alternative using one anchor bolt only - perforation of brackets will suit all types of cable trays and ladders from BAKS
1/2 L F 1/2 L F
1/2 L F 7-9x26
7-9x26
15,55215,5
29 30
L
H
7-9x25 40
50
13x20
XII
APPLICATIONS
Supporting cable trays and ladders, pipes, and other system's components under very heavy load
Thickn. (ga) ≠ [mm]:0,7 1,0 1,2 1,5 2,0
8
XII XII
Bracket
WTRE
APPLICATIONS
Supporting cable trays and ladders, pipes and other system's components, under very heavy load.
For mechanical properties of screws and anchors see Section XI page 15
Length
L
mm
Catalogue CODE No.
WTRE500 WTRE400 WTRE300 WTRE200
WTRE...
Allowable Tensile Load
Fmax[kN] 1pc
kg Qty
WTRE600 WTRE800 WTRE700
WTRE1000 WTRE900
215 315 415 515 615 715 815
Height
H
mm 200 200 220 220 220 220 280
1,90 2,70 3,40 4,30 5,20 5,80 6,30
WTRE1100 WTRE1200 WTRE1300 WTRE1400 WTRE1500
915 1015 1115 1215 1315 1415 1515
280 280 280 280 280 280 280
713220 713320 713420 713520 713620 713720 713820 713920 713120 713121 713122
713124 713125 713123 8,00
7,00 7,00 6,00 6,00 5,50 7,00 7,00 6,50 6,00 5,00 4,50 4,00 3,50
10 8 6 1 1 1 1 1 1 1 1 1 1 1 6,90
7,50 8,10 8,70 9,40 10,10 10,70
Adapter Plate
PWCK Catalogue
CODE No.
721100 PWCK
PWCK
Allowable Tensile Load Fmax[kN] 1pc
kg Qty
2,00 3,00 1
Catalogue CODE No.
721200 PWTK
PWTK
Allowable Tensile Load Fmax[kN] 1pc
kg Qty
3,00 5,20 1
Catalogue CODE No.
722300 PWCP
PWCP
Allowable Tensile Load Fmax[kN] 1pc
kg Qty
2,50 3,60 1
Catalogue CODE No.
722400 PWTP
PWTP
Allowable Tensile Load Fmax[kN] 1pc
kg Qty
4,00 5,80 1
MATERIAL Hot-dip galv. steel PN-EN ISO 1461:2011 Available finishes:
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
APPLICATIONS
Fastening heavy duty brackets to steel and concrete structures
PWCP
PWTP
Due to the market demand we at BAKS have introduced a very durable bracket with trapeze reinforcement. It can be fixed directly to walls or to assemblies on Ceiling Brackets WPCT and WPCE/WPCEO from BAKS, as well as in combination with adapter plate for assemblies on steel beams.
DSC400H200
PWTP
UD3 WTRE400
ZM/ZMO + SGM8x14
Example Assembly
DSC400H200 PWTK
UD3
WTRE400 ZM/ZMO + SGM8x14
Strong
Strong 17x20
H
L
65
400
435
40
13x30 PWTK
IMPORTANT! Mounting system specially adjusted to Brackets WWC, WMC/WMCO, WWV.
To install bracket mounting systems use Hold-Down Clamps UD3.
IMPORTANT! Mounting system specially adjusted to Brackets Reinforced WTRE and Brackets WWV and WWC.
To install bracket mounting systems use Hold-Down Clamps UD4.
IMPORTANT! Mounting system specially adjusted to Brackets WWC, WMC/WMCO, WWV.
To install bracket mounting systems use Hold-Down Clamps UD3.
IMPORTANT! Mounting system specially adjusted Reinforced WTRE and Brackets WWV and WWC.
To install bracket mounting systems use Hold-Down Clamps UD4.
435
40
65
400
13x30 80
1/2 L F 7-9x26
385
400
55
40
13x30
400
13x30 40
38555
80
55 1616
Thickn. (ga) ≠ [mm]:0,7 1,0 1,2 1,5 2,0
9
XII XII
Assembly Plate
PZC...
APPLICATIONS
A nut protecting channels against unbending, allowing the use of brackets to install with channels
MATERIAL for PZC40 and PZC100 Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09
Available finishes:
F- steel galvanized using zinc flake coating method PN-EN ISO 10683:2014-09 E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
MATERIAL for PZC50 and PZC100/50 Steel galvanized using zinc flake coating method PN-EN ISO 10683:2014-09 Available finishes:
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
APPLICATIONS
In combination with to Cable Clamp UK/UKO to attach electrical cables directly on the wall in the vertical plane, or horizontally onto the ceiling
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 (SG) Available finishes:
F- steel, hot-dip galv.
to PN-EN ISO 1461:2011 (HDG)
E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
SD...
Rung
Dimension a mm CODE
PZC...
PZC40 PZC100
1pc kg CatalogueNo.
750300 750400 0,03 0,09
100 100 Qty
PZC50 PZC100/50
750301 750401 0,05 0,14
100 100 40
40 50 50
Dimension b mm 40 100
50 100
Dimension g mm 2,00 2,00 4,00 4,00
Application Examples of Rung SD in Combination with Cable Clamp UK/UKO and Anchor Bolt STR Fixing Bracket WWC to Support
Channel CWC40H40
PZC40
Assembly Plate PZC enables installation of any brackets with smooth adjustment
Nut NW enables installation of brackets with smooth adjustment
PZC
WW
SMM8x16
Installation Example of Assembly Plate PZC with Nut NW to Fix a Bracket with a Support Channel
≠ 2,0 mm
SDC...
0,13 18
35
0,26 18
35
0,39 18
35
0,52 18
35
0,65 18
35
0,78 18
35
403810 403820 403830 403840 403850 403860
50 50 50 50 30 30 90
190 290 390 490 590 SDC100
SDC200 SDC300 SDC400 SDC500 SDC600
Length mm
L
Catalogue CODE No.
Height mm
H
Width
mm
a
1pckg Qty
≠ 2,0 mm a
b 13
g
11x20 a
b
g
9x15
L
a
H
16
IMPORTANT! Perforated rungs available upon special request
XII
UK2/UKO2
APPLICATIONS Fixing cables to cable ladders DUP, DUD, DUC, DSP, DSC, DST
MATERIAL
Steel galvanized using zinc flake coating method PN-EN ISO 10683:2014-09 Available finishes:
E- stainless steel (SS), grade 1.4301 (AISI304)
CODE ODA
ODA
Catalogue No.
0,37 752026 40 1pc
kg Qty
ODB ODA
Adjustable Spacer Cable Clamp
UK2/UKO2...
Dimension mm
D
CODE
UK2/UKO2/16-22 16-22 UK2/UKO2/22-28 22-28 UK2/UKO2/28-34 28-34 UK2/UKO2/34-40 34-40 UK2/UKO2/40-46 40-46 UK2/UKO2/46-52 46-52 UK2/UKO2/52-58 52-58
100 100 100 100 50 50 50 Qty Catalogue
No.
2 cables
0,07 0,09 0,10 0,12 0,15 0,16 0,18
403000 403100 403200 403300 403400 403500 403701 1pc Height kg
mm
H
80 90 105 118 132 149 158
UK2/UKO2/58-64 58-64 163 0,20 403600 50
UK1/UKO1...
CODE
Dimension mm
D
1 cable Height
mm
H
1pc kg CatalogueNo.Qty UK1/UKO1/16-22
UK1/UKO1/22-28 UK1/UKO1/28-34 UK1/UKO1/34-40 UK1/UKO1/40-46 UK1/UKO1/46-52 UK1/UKO1/52-58
16-22 22-28 28-34 34-40 40-46 46-52 52-58
57 61 71 78 86 97 100
0,05 0,06 0,07 0,08 0,10 0,11 0,12
402300 402400 402500 402600 402700 402800 402850
150 150 100 100 100 100 100 UK1/UKO1/58-64 58-64 103 0,13 402900 100 UK1/UKO1/64-70 64-70 116 0,14 404000 100
ODB
Catalogue No.
0,37 752122 CODE
ODB 40
1pc
kg Qty
Thickn. (ga) ≠ [mm]:0,7 1,0 1,2 1,5 2,0
10
XII XII
Application Examples of "ODA" and "ODB"
"ODB"
"ODA"
E-90
- Detailed info in section XIX
E-90
UK1/UKO1
Note. Old type of Cable Clamp UK1/UKO1 is available only while stock lasts.
Possibility to use protection throug RO1.
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 (SG) Available finishes:
F- steel galvanized using zinc flake coating method PN-EN ISO 10683:2014-09 E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
Note. Hot dip galvanizing (PN-EN ISO 1461:2011 (HDG)) and diffusion galvanizing method (PN-EN ISO 17668:2016) for elements up to 200mm will be replaced with zink flake coating method PN-EN ISO 10683:2014-09
H
D
150
9x18
185÷260
95
125 35
HD
16 23
E-90
APPLICATIONS
Installing cable trays and ladders in the proper distance from the wall
Smooth adjustment
Smooth adjustment
Application Examples of ODC and ODD with Wall Trunking Systems
Adjustable Spacer
APPLICATIONS
Installing cable trays and ladders in the proper distance from the wall
ODC
ODC
Catalogue No.
0,13 752222 CODE
ODC 40
1pc
kg Qty
CODE ODD
ODD
Catalogue No.
0,17 752223 40 1pc
kg Qty
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 (SG) Available finishes:
F- steel galvanized using zinc flake coating method PN-EN ISO 10683:2014-09 E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
ODD
Fastening Bracket
CODE UT
UT
Height mm
H
Catalogue No.
130 0,23 751600 50 1pc
kg Qty
CODE UTM/UTMO
UTM/UTMO
Height
H
mm
Catalogue No.
66 0,17 751700 100 1pc
kg Qty
UT
UTM/UTMO
APPLICATIONS
Installing cable trays and ladders in the proper distance from the wall
Thickn. (ga) ≠ [mm]:0,7 1,0 1,2 1,5 2,0
11
XII XII
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 (SG) Available finishes:
F- steel galvanized using zinc flake coating method PN-EN ISO 10683:2014-09 E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
ODC ODD
Angle Bracket
CODE TM
TM
Catalogue No.
0,12 751909 100 1pc
kg Qty
APPLICATIONS
Fast installation of large structures on channels
TM
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 (SG) Available finishes:
F- steel galvanized using zinc flake coating method PN-EN ISO 10683:2014-09 E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
≠ 2,0 mm
≠ 2,0 mm
E-90
- Detailed info in section XIX
E-90
E-90
11x20
150 35
H
11x20
Ø11
9x15
33 120
H
9x18 22
92
Ø9 9x18
60÷95
95÷160 76
95
27 95
9x18
XII
Application Examples of UT and BTM
UT BTM
SGM8x14 SGM6x12
SGM10x20
UT PSRM8x75 PSRM8x75
PSRM8x75 PST
CWC40H47
BTM
Application Examples of BTM
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 (SG) Available finishes:
F- steel galvanized using zinc flake coating method PN-EN ISO 10683:2014-09 E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
APPLICATIONS
Fast installation of large structures on channels
Fastening Plate
BTM CODE
BTM
BTM
Catalogue No.
0,18 751800 50 1pc
kg Qty
Thickn. (ga) ≠ [mm]:0,7 1,0 1,2 1,5 2,0
12
XII XII
Note. Hot dip galvanizing (PN-EN ISO 1461:2011 (HDG)) and diffusion galvanizing method (PN-EN ISO 17668:2016) for elements up to 200mm will be replaced with zink flake coating method PN-EN ISO 10683:2014-09
140
140
11x20
34
Rod Grip
Catalogue CODE No.
UPW/UPWO
750100 Height
H
mm 25 Width
a
mm 95
UPW/UPWO 100
US WWC
PG
UPW/UPWO
WMC/WMCO PG
UPWK/UPWKO WPPG
Qty UPW/UPWO
Catalogue CODE No.
UPWK/UPWKO
752900 Height
H
mm 25 Width
a
mm 128
UPWK/UPWKO 50
UPWK/UPWKO
Qty PD9
Spacer
CODE PD9
PD9
0,02 803200 100 8,5
mm
Dimension Catalogue No.
1pc
kg Qty
PG
WFL/WFLO PD11
MATERIAL:
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 (SG) Available finishes:
F- steel galvanized using zinc flake coating method PN-EN ISO 10683:2014-09 E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
APPLICATIONS
Alternative to attach threaded rod support at the end of the bracket to enhance their mechanical properties.
To be used with do WZS, WW, WWT, WWS/WWSO, WWC, WWCH, WMCH.
CODE PD11
PD11
0,03 803100 100 11
mm
Dimension Catalogue 1pc No.
kg Qty
APPLICATIONS
PD11 - for Brackets WFC/WFCO, WFL, WFCS, WFLS
PD9 - for Brackets WFMC, WFML Thanks to using spacers stiff hold is obtained
PD11
Thickn. (ga) ≠ [mm]:0,7 1,0 1,2 1,5 2,0
13
XII XII
E-90 E-90
- Detailed info in section XIX
E-90
E-90
H 9x18
a Ø12
H 9x18
M8
95
a Ø12
30 15 20
Ø11
30 12
10Ø8,5
XII
Protective Cap
MATERIAL
Polyethylene. Standard colour: green to RAL 6029.
Available finishes:
white to RAL 9010, silver to RAL 9006.
APPLICATIONS
Protecting installers against cut from steel edges; improving overall product appearance NOF...
NOFM
Catalogue CODE No.
900667
NOFM 100
Qty
NOF
Catalogue CODE No.
900666
NOF 100
Qty IMPORTANT! Fits with brackets: WFML and WFMC.
IMPORTANT! Fits with brackets: WFL/WFLO and WFC/WFCO.
NOFM
NOF
Thickn. (ga) ≠ [mm]:0,7 1,0 1,2 1,5 2,0
14
XII XII
APPLICATIONS Suspending cable runs.
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 (SG) Available finishes:
F- steel, hot-dip galv.
to PN-EN ISO 1461:2011 (HDG)
E- stainless steel (SS), grade 1.4301 (AISI304) except WFMC...
L- powder coating in a full range of colours (PC) (info p. 4)
Side Holder
Bracket Bracket Bracket
WC
WSS WFC/WFCO
F WFMC
F
Length
L
mm
Catalogue CODE No.
32 42 52
0,08 0,09 0,10
730204 730104 730304 WC30
WC40 WC50
WC...
Allowable Tensile Load
Fmax[kN]
0,30 0,25 0,22
100 100 100 1pc
kg Qty
102 88 78 Height
mm
H
WFMC...
720341 720331 720321 720311
WFMC400 WFMC300 WFMC200 WFMC100
Length
L
mm
Catalogue CODE No.
Allowable Tensile Load Fmax[kN] 1pc
kg
720316 WFMC150
143 197 243 337 443
0,35 0,30 0,25 0,20 0,15
20
20 20 20 20 20 0,26
0,30 0,33 0,42 0,48
720312 WFMC50 127 0,40 0,22
For installation we recommend to use spacer PD9, see page 13
For installation we recommend to use spacer PD11, see page 13
Length
L
mm
Catalogue CODE No.
WFC/WFCO...
Allowable Tensile Load
Fmax[kN] 1pc
kg Qty
455 355 255 165
0,86 0,73 0,60 0,47
720340 720330 720320 720310
WFC/WFCO400 WFC/WFCO300 WFC/WFCO200 WFC/WFCO100
0,23 0,30 0,50
0,85 20
20 20 20
655 555
1,12 0,99
720360 720350 WFC600
WFC500
0,10
0,14 20
20
205 0,53 720315
WFC/WFCO150 0,70 20
Length mm
L
Catalogue CODE No.
70 120 170 220
0,13 0,18 0,22 0,25
720205 720210 720215 720220 WSS50
WSS100 WSS150 WSS200
WSS...
Allowable Tensile Load
Fmax[kN]
0,40 0,30 0,22 0,17
100 100 100 100 1pc
kg
For mechanical properties of screws and anchors see Section XI page 15
Qty F
E-90
Qty
- Detailed info in section XIX
E-90
MATERIAL
Steel, strip-galv. acc. to the Sendzimir method to PN-EN 10346:2015-09 (SG) Available finishes:
F- steel galvanized using zinc flake coating method PN-EN ISO 10683:2014-09 E- stainless steel (SS), grade 1.4301 (AISI304) L- powder coating in a full range of colours (PC) (info p. 4)
Note. Hot dip galvanizing (PN-EN ISO 1461:2011 (HDG)) and diffusion galvanizing method (PN-EN ISO 17668:2016) for elements up to 200mm will be replaced with zink flake coating method PN-EN ISO 10683:2014-09
E-90
120
22
L 7x17
Ø9
H
45 L
15
9x18 11
180
10,5x29
L 10,5-7x26
60
15
45
F
150
L 36
Ø8-6,5x25
30
Ø8,5