20.08.2018, godz. 13:07 https://www.elmark.com.pl/pl/sklep/anybus/AB4005 <`/td>
AB4005
AB4005 Anybus-S Profibus-DP
AB4005 Anybus-S Profibus-DP
Complete Profibus-DP Slave functionality according to IEC 61158
●
Automatic baud rate detection (9600 bit/s - 12 Mbit/s)
●
RS-485 optically isolated Profibus interface with DC/DC converter on-board
●
Full interchangeability with AnyBus-S modules for other networks
●
Save/load configuration in flash supported
●
AnyBus-S Starterkit and evaluation board available
●
Up to 244 bytes input and 244 bytes output
●
Pełny opis produktu
New hardware is released and will start to be delivered during May 2008. The new hardware is based on the NP30 network processor developed by HMS, and has been tested at a test center and conforms to the latest specifications. The new version has the same functionality as the old version. The Anybus-S Profibus-DP is available with a 2k byte parallel Dual Port Ram interface. Profibus station address can be selected via switches on the front side of the module or by software via the
application interface. A bus termination switch is located on the front side of the module. A DC/DC converter and optocouplers are provided onboard. The module is certified by the Profibus user organization and has proven conformance and
interoperability with leading PLC´s from Siemens, Rockwell, ABB & Omron.
Specyfikacja techniczna
Specyfikacja techniczna
●
Wymiary:
54 mm x 86 mm x 15 mmNapięcie zasilania:
+5V max 350mATemperatura pracy:
0 to +70°CBaud Rate:b
Auto baudrateI/O Input:
max 244 bytesI/O Output:
max 244 bytesInterfejs urządzenia:
RównoległyFunkcje profibus:
All mandatory + User parameter data, Device related data diagnos20.08.2018, godz. 13:07 https://www.elmark.com.pl/pl/sklep/anybus/AB4005 <`/td>
Modele
Symbol Opis
AB4005 Anybus-S Profibus-DP
Zawartość zestawu
Anybus-S Profibus-DP
●