Table of contents
Preface
Organisation
Wave Loads and Responses
Hydroelasticity
Vibrations
Fatigue
Structural Analysis
Hull Ultimate Strength
Ultimate Strength
Damaged Structures
Structural Design
Fabrication Technology
Composite Structures
Crashworthiness
Renewable Energies Devices
Uncertainty and Reliability
Wave Loads and Respooses
Experimental investigation of the influence of hull damage on ship r e s p o n s e s in waves S.S. B e n n e t t s A.B. Phillips
Unstructured M E L s c h e m e for 3D body nonlinear ship hydrodynamics A.C. Chapchap & P. Temarel
An initial estimation of DP requirements for a non-moored operational F P S O G.E. Hearn & G.C. Bratu
CFD based computation of bow impact loads for buckling a s s e s s m e n t J . Oberhagemann, M. Radon, H. von Sella & D.K. Lee
Comparison of two practical methods for seakeeping a s s e s s m e n t of damaged ships J . Parunov, M. Óorak & I. Gledic
Smoothed Particle Hydrodynamics (SPH) method for modelling 2-dimensional free surface hydrodynamics M.Z. Ramli, P. Temarel & M. Tan
Wave-induced responses of a bulk carrier in heading and following s e a s X.L.Wang, R.M. Liu & J . J . Hu
Numerical simulation of the dynamics of a large moored tanker S. Zhang, Q. Jin, J . Xin, T. Li, P. Temarel &W. Geraint Price
Hydroelasticity
Slamming impact loads on high-speed craft sections using two-dimensional modelling J . Camilleri, D.J. Taunton & P. Temarel
Non-linear hydroelastio and fatigue analyses for a very large bulk carrier B. Cristea, C.I. Mocanu & L. Domnisoru
Hydroelastic analysis of a flexible barge in regular waves using coupled C F D - F E M modelling P. Lakshmynarayanana, P. Temarel & Z. Chen
Vibrations
Simplified method for natural frequency analysis of stiffened panel E. Avi, A. Laakso, J . Romanoff & I. Lillemae
Investigation of vibrational power flow patterns in damaged plate structures for damage localisation P. Boonpratpai & Y.P. Xiong
Influence of the s e a action on the measured vibration levels in the comfort a s s e s s m e n t of mega yachts E. Brocco, L. Moro, P.N. Mendoza Vassallo, M. Biot, D. Boote, T. Pais & E. Camporese
A computational framework for underwater shock response of marine structures C. Diyaroglu, D. De Meo & E. Oterkus
Liquid sloshing analysis for independent tank with elastic supports W. Liu, H.X. Xue & W.Y. Tang
Numerical simulation of the dynamic behaviour of resilient mounts for marine diesel engines L. Moro, E. Brocco, P.N. Mendoza Vassallo, M. Biot & H. Le Sourne
Characteristic of low and middle frequency underwater noise of a catamaran F. Z. Pang, Y.Z. Xue, D. Tang, S . Ll & Y.P. Xiong
Simulation of the vibration characteristics of a propulsion system excited by hull deformations Z. Tian, X.P. Yan, C. Zhang & Y.P. Xiong
A new approach to analyze the underwater vibration of double layer ribbed cylinder F. Wang, Y Xiong, Z. Weng & L. He
Impact resistance a s s e s s m e n t of shipboard equipment considering spectrum dip effect Y J . Yang, M. Yu, X.B. Li & L.H. Feng
Natural frequencies of eccentric cylindrical shells filled with pressurized fluid G. J . Zhang, T.Y. Li, X. Zhu, L. Xiong & Y.P. Xiong
Magnetorheological elastomer materials and structures with vibration energy control for marine application G. Zhu, Y.P. Xiong, S . Daley & R.A. Shenoi
Corrosion fatigue cracl< growth in offshore wind monopile steel HAZ material O. Adedipe, F. Brennan & A. Kolios
Improvements in fatigue strength a s s e s s m e n t of marine propellers C. Bertoglio, S . Gaggero, C.M. Rizzo, M. Viviani, C . Vaccaro & F. Conti
Fatigue crack growth performance of laser hybrid and arc welds of AH36 naval steels E. V. Chatzidouros, T. Tsiourva, D.I. Pantelis & A. Lopez
Overload and dwell time effects on c r a c k growth property of high strength titanium alloy T C 4 ELI used in submersibles F. Wang, W.C. Qui, Y.Y. Wang & Y S . Shen
Consideration of s t r e s s gradient effects for complex structures in local fatigue approaches C. Fischer & W. Fricke
Fatigue a s s e s s m e n t of joints at bulb profiles by local approaches C. Fischer, W. Fricke & C.M. Rizzo
Fatigue life improvement of laser-welded web-core steel sandwich panels using filling materials D. Frank, J . Romanoff & H. Remes
A full-scale fatigue test on longitudinal-through-bulkhead detail by using equivalent angle bar Q. Yi, J . Yue, Y. Liu, W. Tang & Z. He
Springing effect on the fatigue life of an 8000TEU container ship
P.-K. Liao, Y - J . Lee, H.-J. Lin, S.-C. Tsai, H.-L. Chien, B.C. Chang & G.M. Luo
A fracture mechanics based approach for the analysis of c r a c k growth at weld joints of ship structures B.C. Lou, S . Zhang, J . Tong, S . Wong, F. Cheng & S . Hirdaris
A study on the effect of hull girder vibration on the fatigue strength M. Oka, J. Niwa & K. Takagi
Fatigue strength of welded extra high-strength and thin steel plates
H. Remes, M. Peltonen, T. Seppanen, A. Kukkonen, S . Liinalampi, I. Lillemae, P. Lehto, H. Hanninen, J . Romanoff & S . Nummela Investigation of weld root fatigue of single-sided welded T-joints
W. Sundermeyer, W. Fricke & H. Paetzold
Fatigue data of High-Frequency Mechanical Impact (HFMI) improved welded joints subjected to overloads H.C. Yildirim & G. Marquis
Application of wave models to fatigue a s s e s s m e n t of offshore floating structures T. Zou, M.L. Kaminski & X.L. Jiang
structural Analysis
A simplified F E model for the non-linear analysis of container s t a c k s subject to inertial loads due to ship motions E. Brocco, L. Moro & M. Biot
Structural Health Monitoring of marine structures by using inverse Finite Element Method A. Kefal & E. Oterkus
Method for estimating soft clay type seabed embedment by pipeline movement D.K. Kim, M.S. Liew, S.Y. Yu, K.S. Park & H.S. Choi
Assumptions and reality: S t r e s s states in uniaxial tension test M. Körgesaar
Dynamic analysis of ring stiffened conical-cylindrical shell combinations with general coupling and boundary conditions X.L. Ma, G.Y. Jin, Y.P. Xiong & Z.G. Liu
The determination of ice-induced loads on the ship hull from shear strain measurements M. Suominen, J . Romanoff, H. Remes & P. Kujala
A study of c r o s s deck effects on warping s t r e s s e s in large container ships R. Villavicencio, S . Zhang & J . Tong
Analysis on influence of spherical bulkhead reinforcement on stability S. Yuan, X.H. Miao & B. Luo
Hull Ultimate Strength
Structural capacity of an aging box girder accounting for the presence of a dent S. Saad-Eldeen, Y. Garbatov & C. Guedes Soares
Strength analysis of ship shaped structures subjected to asymmetrical bending moment M. Tekgoz, Y. Garbatov & 0 . Guedes Soares
A study on the effect of lateral loads on the hull girder ultimate strength of bulk carriers K.Toh&T.Yoshikawa
Model test on the ultimate longitudinal strength of a damaged box girder Y. Yamada & T. Takami
Ultimate strength
Influence of shear-induced secondary bending on buckling of web-core sandwich panels J . Jelovica & J . Romanoff
Influence of lateral pressure on load-shortening behavior of stiffened panels under combined loads L. Jiang & S . Zhang
Elastic shear buckling capacity of the longitudinally stiffened flat panels S. Kitarovic, J . Andric & K. Piric
Strength of aluminium alloy ship plating under combined shear and compression/tension M.S. Syrigou, S.D. Benson & R.S. Dow
Effects of initial imperfection s h a p e s on plate ultimate strength under combined loads S. Zhang & L. Jiang
Damaged Structures
statistics of still water bending moment of damaged ships B. Buzanció Primorac, M. Corak & J . Parunov
Multiphysics modelling of S t r e s s Corrosion Cracking by using peridynamics D. De Meo, C. Diyaroglu, N. Zhu, E. Oterkus & M. Amir Siddiq
Progressive collapse of intact and damaged stiffened panels A. Leelachai, S.D. Benson & R.S. Dow
Comparative analysis of HCSR based on ultimate strength of intact ships and residual strength in damaged condition W. Lei, W.Z. Quan & H.J. Hao
Residual strength of a severely damaged box-girder with non-uniform and inter-crystalline corrosion S. Saad-Eldeen, Y. Garbatov & C. Guedes Soares
structural Design
Investigation into the implications of increasing minimum manhole a c c e s s requirements in marine structures P. Eames, H. Hickson & J.M. Underwood
Structural design and optimisation of an aluminium trimaran D. Fuentes, M. Salas, G. Tampier & C. Troncoso
Efficient optimization framework for robust and reliable structural design considering interval uncertainty Y. Liu & M.D. Collette
Multi-objective optimization of lightweight modular sandwich panels A. Milat, T. Tomac, D. Frank, D. Dundara, 0. Kuzmanovié & V. Radolovié
Fabrication Techoology
Numerical investigation of welding induced distortion of a stiffened plate structure Z. Chen, Z . C . Chen & R.A. Shenoi
Reduction in weld induced distortions of butt welded plates subjected to preventive m e a s u r e s M. Hashemzadeh, Y. Garbatov & C. Guedes Soares
Buckling mitigation of stiffened panels through thermomechanical tensioning N.R. Mandal, S . Kumar, D. Fodder, A. Gadagi &T. Mathew
Numerical analysis of residual s t r e s s in butt-welded High Tensile Strength steel structures Y.X. Wan, Y.P. Xiong & L B . Li
Composite Stroctores
-Comparison of effective breadth definitions large composite top-hat stiffened grillages E. Arnaud, A.J. Sobey & J.I.R. Blake
Static and fatigue tests of hybrid composite-to-steel butt joints E.A. Kotsidis, P. Yarza, N.G. Tsouvalis, R. de la Mano & E. Rodriguez-Sem'n Mechanical characterization of yachts and pleasure crafts fillers G. Nebbia, C.M. Rizzo, M. Gaiotti &A. Caleo
Composite riser design and development—A review
D.-C. Pham, S . Narayanaswamy, X. Qian, W. Zhang, A . J . Sobey, Wl. Achintha & R.A. Shenoi Steel or composite car deck structure—a comparison analysis of weight, strength and c o s t J.W. Ringsberg
Crashworthiness
Numerical crashworthiness analysis of an offshore wind turbine monopile impacted by a ship A. Bela, L. Buldgen, Ph. Rigo & H. Le Sourne
Development of a failure strain surface in average s t r e s s triaxiality and average lode angle domains of a low temperature high strength steel J . Cheung, S . J . Park & G.T. Tayyar
Structural response of ship bottom floor plating during shoal grounding Z.G. G a o & Z . Q . Hu
Non-linear finite element analysis of crashworthy shields of offshore wind turbine supporting structures B. Liu, Y. Garbatov & C . Guedes Soares
Modelling of structural damage and environmental c o n s e q u e n c e s of tanker grounding K. Tabri, R. Aps, A. Mazaheri, M. Heinvee, A. Jönsson & M. Fetissov
Renewable Energies Devices
A study on the short and long-term analysis of nonlinear hydrodynamic force on an Energy Saving Device D.B. Lee, H.J. Kim & B.-S. Jang
Numerical simulation of multi-body wave point-absorber L. Li, M. Tan & J.I.R. Blake
Optimized topology design for substructure of 10MW grade floating type Wave-Wind Hybrid Power Generation System G.Y. Song, H.C. Song, C.S. Shim, J.H. Park & Y.Y. Park
Fatigue reliability of an offshore wind turbine supporting structure accounting for inspection and repair B. Yeter, Y. Garbatov & C. Guedes Soares
Uncertainty and Relialiility
System reliability analysis of a ship deck structure for buckling collapse and corrosion limit states B. Gaspar & C. Guedes Soares
Effect of the aspect ratio on the ultimate compressive strength of plate elements with non-uniform corrosion B. Gaspar, A.P. Teixeira & C . Guedes Soares
Uncertainty analysis of the energy absorbed in beam and plate elements under impulsive loading B. Liu & C . Guedes Soares
Effects of input uncertainty on composite patch disbond under impact loading S.C. TerMaath & D.C. Hart
Experimental study on the rear bearing load characteristics considering uncertainty external loading S.D. Zhang, Z . L . Liu, X.P. Yan, Y. Jin & B. Qin