1. Pisarkiewicz T., Jankowski H., Vacuum selenization of metallic multilayers for CIS
solar cells. Vacuum, 2003, 70: 435-438.
2. Jankowski H., Kenig T., Maksymowicz L., Pisarkiewicz T., Warzecha M.,
Technologia heterozłącza CIS/CdS do zastosowań fotowoltaicznych Elektronika,
2007, 48(10): 32-34.
3. Goetzberger A., Hebling C., Schock H.-W., Photovoltaic materials, history, status and
outlook. Materials Science and Engineering: R: Reports, 2003, 40(1): 1-46. 4. Nelson J., The physics of solar cells. 2003, London, Imperial College Press.
5. Bube R.H., Properties of Semiconductor Materials. 1998, London, Imperial College Press.
6. Adurodija F.O., Song J., Kim S.D., Kwon S.H., Kim S.K., Yoon K.H., Ahn B.T.,
Growth of CuInSe2 thin films by high vapour Se treatment of co-sputtered Cu-In alloy in a graphite container. Thin Solid Films, 1999, 338(1-2): 13-19.
7. Kerr L.L., Kim S., Kincal S., Ider M., Yoon S., Anderson T.J., Rapid Thermal
Processing of CIS Precursors. Photovoltaic Specialists Conference, 2002, IEEE. 8. Warzecha M., Jankowski H., Pisarkiewicz T., Control of radiation heat transfer in
vacuum system for the preparation of chalcopyrite films. 21 European photovoltaic solar energy conference, 2006, Dresden, Germany
9. Timans P.J., Rapid thermal processing technology for the 21st century. Materials Science in Semiconductor Processing, 1998, 1: 169-179.
10. Edgar T.F., Butler S.W., Campbell W.J., Pfeiffer C., Bode C., Hwang S.B.,
Balakrishnan K.S., Hahn J., Automatic control in microelectronics manufacturing:
Practices, challenges, and possibilities. Automatica, 2000, 36: 1567-1603.
11. Kireev V.Y., Tsimbalov A.S., Rapid Thermal Processing: A New Step Forward in
Microelectronics Technologies. Russian Microelectronics, 2001, 30(4): 225-235. 12. Karg F.H., Development and manufacturing of CIS thin film solar modules. Solar
Energy Materials and Solar Cells, 2001, 66(1-4): 645-653.
13. Palm J., Probst V., Karg F.H., Second generation CIS solar modules Solar Energy,
2004, 77(6): 757-765.
14. Volobujeva O., Altosaar M., Raudoja J., Mellikov E., Grossberg M., Kaupmees L., Barvinschi P., SEM analysis and selenization of Cu–In alloy films produced by
co-sputtering of metals. Solar Energy Materials & Solar Cells, 2009, 93(1): 11-14. 15. Dhere N.G., High Throughput, Low Toxic Processing of Very Thin, High Efficiency
CIGSS Solar Cells. 2006, Florida Solar Energy Center.
16. Repins I., Contreras M., Romero M., Yan Y., Metzger W., Li J., Johnston S., Egaas B., DeHart C., Scharf J., McCandless B.E., Noufi R., Characterization of
19.9%-Efficient CIGS Absorbers. 33rd IEEE Photovoltaic Specialists Conference, 2008, San Diego, California.
17. Siemer K., Klaer J., Luck I., Bruns J., Klenk R., Braunig D., Efficient CuInS2 solar cells from a rapid thermal process (RTP). Solar Energy Materials & Solar Cells, 2001, 67: 159-166.
18. Schenker O., Klenk M., Bucher E., Some results from CuGaSe2 solar cells prepared by rapid thermal processing. Thin Solid Films, 2000, 361-362: 454-457.
19. Soukup D.R.J., Ianno N.J., Kamler C.A., Diaz M., Sharma S., Olejnícek J., Darveau S.A., L. E.C., Ex-situ and in-situ selenization of copper-indium and copper-boron thin
20. Soukup D.R.J., Ianno N.J., Kamler C.A., Olejnícek J., Darveau S.A., L. E.C., Thin
Films of CuInxB1-xSe2 as Absorbers for CIBS Solar Cells. 2009.
21. Birkmire R.W., Eser E., Polycrystalline Thin Film Solar Cells: Present Status and
Future Potential. Annual Review of Materials Science, 1997, 27: 627-653. 22. Bekker J., Alberts V., Witcomb M.J., Influence of selenization techniques on the
reaction kinetics of chalcopyrite thin films. Thin Solid Films, 2001, 387: 40-43. 23. Purwins M., Enderle R., Schmid M., Berwian P., Müller G., Hergert F., Jost S., Hock
R., Phase relations in the ternary Cu–Ga–In system. Thin Solid Films, 2007, 515: 5895–5898.
24. Alberts V., Bekker J., Witcomb M.J., Schon J.H., Bucher E., Control of VSe defect levels in CuInSe2 prepared by rapid thermal processing of metallic alloys. Thin Solid Films, 2000, 361-362: 432-436.
25. Mellikov E., Meissner D., Varema T., Altosaar M., Kauk M., Volobujeva O., Raudoja J., Timmo K., Danilson M., Monograin materials for solar cells. Solar Energy
Materials and Solar Cells, 2009, 93(1): 65-68.
26. Ashour A., Some physical properties of CuInSe2 thin films. Journal of Materials Science: Materials in Electronics, 2006, 17: 625-629.
27. Karg F., Probst V., Harms H., Rimmash J., Riedl W., Kotschy J., Holz J., Treichler R., Eibl O., Mitwalsky A., Kiendl A., Novel Rapid-Thermal-Processing for CIS
Thin-Film Solar Cells. Photovoltaic Specialists Conference, 1993, IEEE.
28. Schenker O., Klenk M., Bucher E., In situ resistivity measurement of CuGaSe2
absorbers prepared by rapid thermal processing. 16th PVSEC, 2000, Glasgow. 29. Berwian P., Weimar A., Muller G., In situ resistivity measurements of precursor
reactions in the Cu–In–Ga. Thin Solid Films, 2003, 431-432: 41-45. 30. Kurdesau F., Kaelin M., Zalesski V.B., Kovalewsky V.I., In situ resistivity
measurements of Cu–In thin films during their selenization. Journal of Alloys and Compounds, 2004, 378: 298–301.
31. Kurdesau F., Kaelin M., Zalesski V.B., Kovalewsky V.I., Gremenok V.F., Zaretskaya E.P., Tiwari A.N., In situ resistivity measurements during selenization process. Thin Solid Films, 2004, 451-452: 245–249.
32. Musiał E., Przegląd elektrycznych źródeł światła. Główne właściwości i tendencje
rozwojowe. Biul. SEP INPE „Informacje o normach i przepisach elektrycznych”,
2006, (79): 3-66.
33. Rudnicki Z., Modelowanie matematyczne radiacyjnego przepływu energii. 2003, Gliwice, Wydawnictwo Politechniki Śląskiej.
34. Dassau E., Grosman B., Lewin D.R., Modeling and Temperature Control of Rapid
Thermal Processing. Computers & Chemical Engineering, 2006, 30(4): 686-697. 35. Fiory A.T., Methods in Rapid Thermal Annealing. Eight International Conference on
Advanced Thermal Processing of Semiconductors, 2000, Gaithersburg.
36. Probst V., Stetter W., Riedl W., Vogt H., Wendl M., Calwer H., Zweigart S., Ufert K.-D., Freienstein B., Cerva H., Karg F.H., Rapid CIS-process for high efficiency
PV-modules: development towards large area processing. Thin Solid Films, 2001, 387(1-2): 262-267.
37. Granneman E., Conduction Heating in RTP Fast, and Pattern-independent. Materials Science Forum, 2008, 573-574: 375-386.
38. Sorrell F.Y., Gyurcsik R.S., Model-Based Emissivity Correction in Pyrometer
Temperature Control of Rapid Thermal Processing Systems. IEEE Transactions on Semiconductor Manufacturing, 1993, 6(3): 273-376.
39. Madura H., Piatkowski T., Emissivity compensation algorithms in double-band
40. Zhang Z.M., Zhou Y.H., An Effective Emissivity Model for Rapid Thermal Processing
Using the Net-Radiation Method. International Journal of Thermophysics, 2001, 22(5): 1563-1575.
41. Chen G., Borca-Tasciuc T., Photon effect on radiative properties of silicon during
rapid thermal processing. Journal of Applied Physics, 1997, 82(2): 830-835.
42. Cho Y.M., Kailath T., Improvement of pyrometric sensing in RTP thermal processing
via adaptive cancellation of lamplight interference. Control Engineering Practice,
1995, 3(5): 643-649.
43. Lee Y.J., Khuri-Yakub B.T., Saraswat K., Temperature Measurement in Rapid
Thermal Processing Using the Acoustic Temperature Sensor. IEEE Transactions on Semiconductor Manufacturing, 1996, 9(1): 115-121.
44. Singh R., Parihar V., Venkataraman S., K.F. Poole, R.P.S. Thakur, A. Rohatgi,
Changing from rapid thermal processing to rapid photothermal processing: what does it buy for a particular technology? Materials Science in Semiconductor Processing,
1998, 1: 219-230.
45. Singh R., Fakhruddin M., Poole K.F., Rapid photothermal processing as a
semiconductor manufacturing technology for the 21st century. Applied Surface Science, 2000, 168: 198-203.
46. Doshi P., Rohatgi A., 18% Efficient Silicon Photovoltaic Devices by Rapid Thermal
Diffusion and Oxidation. IEEE Transactions on electron devices, 1998, 45(8): 1710-1716.
47. Probst V., Palm J., Visbeck S., Niesen T., Tolle R., Lerchenberger A., Wendl M., Vogt H., Calwer H., Stetter W., Karg F., New developments in Cu(In,Ga)(S, Se)2 thin
film modules formed by rapid thermal processing of stacked elemental layers. Solar Energy Materials & Solar Cells, 2006, 90: 3115–3123.
48. Duda J.T., Modele matematyczne, struktury i algorytmy nadrzędnego sterowania
komputerowego. 2003, Kraków, UWND AGH.
49. Czemplik A., Modele dynamiki układów fizycznych dla inŜynierów : zasady i
przykłady konstrukcji modeli dynamicznych obiektów automatyki. 2008, Warszawa, WNT.
50. Królikowski A., Horla D., Identyfikacja obiektów sterowania - metody dyskretne.
2005, Poznań, Wydawnictwo Politechniki Poznańskiej.
51. Zimmer A., Englot A., Identyfikacja obiektów sterowania: Teoria i praktyka dla
uŜytkowników MATLABA. 2005, Kraków, Wydawnictwo Politechniki Krakowskiej. 52. Tatjewski P., Sterowanie zaawansowane obiektów przemysłowych: Struktury i
algorytmy. 2002, Warszawa, Akademicka Oficyna Wydawnicza EXIT.
53. Wang J., Thomas G., A Model Based Predictive Control Scheme for Nonlinear
Process. American Control Conference, 2006, Minneapolis, Minnesota, USA.
54. Grosman B., Lewin D.R., Automated nonlinear model predictive control using genetic
programming. Computers and Chemical Engineering, 2002, 26: 631-640. 55. Modest M.F., Radiative Heat Transfer. 2003, Elsevier Inc.
56. Taler J., Duda P., Rozwiązywanie prostych i odwrotnych zagadnień przewodzenia
ciepła. 2003, Warszawa, WNT.
57. Rudnicki Z., Radiacyjny przepływ ciepła w piecach przemysłowych. 1999, Gliwice, Wydawnictwo Politechniki Śląskiej.
58. Wojas J., Promieniowanie termiczne i jego detekcja. 2008, Warszawa, WNT. 59. Howell J.R., A catalog of radiation heat transfer configuration factors. 1982,
60. Kim S.J., Cho Y.M., Optimal design of a rapid thermal processor via physics-based
modeling and convexoptimization. Control Engineering Practice, 2002, 10: 1199-1210.
61. Banerjee S., Cole J.V., Jensen K.F., Nonlinear Model Reduction Strategies for Rapid
Thermal Processing Systems. IEEE Transactions on Semiconductor Manufacturing,
1998, 11(2): 266-275.
62. Górecki H., Optymalizacja i sterowanie systemów dynamicznych. 2006, Kraków, Wydawnictwa AGH.
63. Kaczorek T., Teoria sterowania i systemów. 1999, Warszawa, PWN.
64. Byrski W., Obserwacja i sterowanie w systemach dynamicznych. 2007, Kraków, Uczelniane Wydawnictwa Naukowo-Dydaktyczne Akademii Górniczo-Hutniczej. 65. Gajda J., Szyper M., Modelowanie i badania symulacyjne systemów pomiarowych.
1998, Kraków, AGH, WEAIiE.
66. Cho Y.M., Kailath T., Model Identification in Rapid Thermal Processing Systems. IEEE Transactions on Semiconductor Manufacturing, 1993, 6(3): 233-245.
67. Tian C., Fujii T., Nonlinear system identification of rapid thermal processing. Control Engineering Practice, 2005, (13): 681-687.
68. Choi J.Y., Do H.M., Choi H.S., Adaptive Control Approach of Rapid Thermal
Processing. IEEE Transactions on Semiconductor Manufacturing, 2003, 16(4): 621-632.
69. Yang D.R., Lee K.S., Ahn H.J., Lee J.H., Experimental Application of a Quadratic
Optimal Iterative Learning Control Method for Control of Wafer Temperature Uniformity in Rapid Thermal Processing. IEEE Transactions on Semiconductor Manufacturing, 2003, 16(1): 36-44.
70. Qin S.J., Badgwell T.A., A survey of industrial model predictive control technology. Control Engineering Practice, 2003, 11: 733-764.
71. Balakrishnan K.S., Edgar T.F., Model-based control in rapid thermal processing. Thin Solid Films, 2000, 365: 322-333.
72. Potze W., Radiation heat transfer in axisymmetric quartz glass tubes. Journal of Quantitative Spectroscopy & Radiative Transfer, 2004, 84: 575-586.
73. Jan Y.-K., Lin C.-A., Lamp Configuration Design for Rapid Thermal Processing
Systems. IEEE Transactions on Semiconductor Manufacturing, 1998, 11(1): 75-84. 74. Breedijk T., Edgar T.F., Trachtenberg I., Model-Based Control of Rapid Thermal
Processes. American Control Conference, 1994, Baltimore.
75. Theodoropoulou A., Adomaitis R.A., Zafiriou E., Model Reduction for Optimization
of Rapid Thermal Chemical Vapor Deposition Systems. IEEE Transactions on Semiconductor Manufacturing, 1998, 11(1): 85-98.
76. Atwell J.A., King B.B., Reduced Order Controllers for Spatially Distributed Systems
via Proper Orthogonal Decomposition. SIAM Journal on Scientific Computing, 2005, 26(1): 128-151.
77. Felice R.A., Tungsten Filament Emissivity Behavior. 2006.
78. Findeisen R., Imsland L., Allgower F., Foss B.A., State and Output Feedback
Nonlinear Model Predictive Control: An Overview. European Journal of Control,
2003, 9(2-3): 190-206.
79. Peuse B., Evolution of Commercial RTP Modules. Materials Science Forum, 2008, 573-574: 21-31.
80. Su A.-J., Jeng J.-C., Huang H.-P., Yu C.-C., Hung S.-Y., Chao C.-K., Control relevant
issues in semiconductor manufacturing: Overview with some new results. Control Engineering Practice, 2007, 15: 1268-1279.
81. Cho Y.M., Gyugyi P., Control of Rapid Thermal Processing: A System Theoretic
Approach. IEEE Transactions on control systems technology, 1997, 5(6): 664-653. 82. Choi J.Y., Do H.M., A Learning Approach of Wafer Temperature Control in a Rapid
Thermal Processing System. IEEE Transactions on Semiconductor Manufacturing,
2001, 14(1): 1-10.
83. Maciejowski J.M., Multivariable feedback design. 1991, Wokingham, Addison-Wesley.
84. Jankowski H., Szczurkowski M., Pisarkiewicz T., Warzecha M., Worek C.,
Sterowanie radiacyjnym transportem energii cieplnej w próŜniowych systemach do wytwarzania materiałów fotowoltaicznych. VII Krajowa Konferencja Techniki PróŜni,
2005, Cedzyna k/Kielc, Oficyna Wydawnicza Politechniki Warszawskiej.
85. Warzecha M., Thermal process modeling as a step in photovoltaic material
technology improvement. Tools of Information Technology Conference, 2007, WSIZ Rzeszów.
86. Warzecha M., Jankowski H., Maksymowicz L., Pisarkiewicz T., Pomiary
pirometryczne w modelowaniu termicznym lampy halogenowej stosowanej w RTP.
Elektronika, 2008, 49(6): 201-202.
87. COMSOLAB, COMSOL Multiphysics User’s Guide. 2008.
88. Roover D., Emami-Naeini A., Ebert J.L., Ghosal S., Linden G.W., Model-Based
Control of Fast-Ramp RTP Systems. International Conference on Advanced Thermal Processing of Semiconductors, 1998, Tokyo, IEEE.
89. Jankowski H., Miller J., Pisarkiewicz T., Warzecha M., Worek C., A model for a
device with radiation heat transfer for selenization of Cu/In metallic precursors in photovoltaic applications. Vacuum, 2004, 75: 79–83.
90. Kameswaran S., Biegler L.T., Convergence rates for direct transcription of optimal
control problems using collocation at Radau points. Computational Optimization and Applications, 2008, 41(1): 81-126.
91. Logerais P.O., Girtan M., Bouteville A., Influence of the quartz window in a rapid
thermal processing apparatus. Journal of Optoelectronics and Advanced Materials,
2006, 8(1): 139-143.
92. Warzecha M., Jankowski H., Maksymowicz L., Pisarkiewicz T., Modular process
control system for photovoltaic thin films manufacturing. Vacuum, 2008, 82: 1107-1110.