Tematem rozprawy jest oddziaływanie siarki przechodzącej z masy formierskiej do powierzchni odlewów z żeliwa sferoidalnego na powstawanie zniekształcenia grafitu kulkowego w warstwie wierzchniej. W ramach badań wykonano doświadczalne odlewy z żeliwa sferoidalnego zarówno w masie bezsiarkowej, jak i w masach z udziałem tego pierwiastka. Zastosowano sypką masę samoutwardzalną z żywicą furfurylową o różnej zawartości siarki. Niniejsza praca prezentuje nową technologię sypkiej masy samoutwardzalnej z udziałem żywicy furfurylowej, w której zastosowano nowo opracowany materiał - utwardzacz o zredukowanej zawartości kwasów siarkopochodnych.
An influence of sulphur passing from the moulding sand to the surface layer of nodular graphite iron castings on distorted graphite forms existence is a subject of this thesis. In examinations experimental castings from nodular graphite iron were made in the non sulphuric sand, as well as in sands with the participation of this element. No-bake moulds with furfuryl resin about the different sulphur content were used. This thesis presents the new technology of no-bake sand with fiirfuryl resin, where the new-created material - hardener about the reduced content of sulphonic and sulphuric acids was used in.