• Nie Znaleziono Wyników

W MONTAGEANLEITUNG / INSTRUCTION SHEET: DATENDOSE / OUTLET HSEDU2UW5F CAT.5e 2xRJ45 UTP, UP, 80x80

N/A
N/A
Protected

Academic year: 2022

Share "W MONTAGEANLEITUNG / INSTRUCTION SHEET: DATENDOSE / OUTLET HSEDU2UW5F CAT.5e 2xRJ45 UTP, UP, 80x80"

Copied!
1
0
0

Pełen tekst

(1)

W MONTAGEANLEITUNG / INSTRUCTION SHEET:

DATENDOSE / OUTLET HSEDU2UW5F CAT.5e 2xRJ45 UTP, UP, 80x80

w BESCHREIBUNG / DESCRIPTION

SEITE 1/1 MONTAGEANLEITUNG:

DATENDOSE HSEDU2UW5F CAT.5e 2xRJ45 UTP, UP, 80x80 / 01-2007 Änderungen, etwaige Satz- und Druckfehler vorbehalten.

ZENTRALE ÖSTERREICH Seybelgasse 13, A - 1230 Wien TELEFON +43 1/866 85-0

E-MAIL zentrale@schrack.com, INTERNET www.schrack.com

Kabelmantel laut Skizze abmanteln (Angaben in mm). /

Strip jacket off the cable. Length according to drawing (Figures: mm).

Die Paare trennen und für die Aufschaltung vorbereiten. /

Separate and straighten the pairs to prepare the wires for punch down.

Gehäusedeckel herunterschrauben. / Open the back cover.

Jeden Einzeldraht lt. Farbcode mittels Schneid klemmwerkzeug kontaktieren. / Punch down each wire into connection block by use of punching tool.

Kontaktieren der Drähte. / Punch down wires.

Gehäusedeckel wieder schließen. / Close the back cover.

W ABMESSUNGEN / DIMENSIONS W SCHALTBILD / SCHEMA

Cytaty

Powiązane dokumenty

Seybelgasse 13, A - 1230 Wien, TELEFON +43 1/866 85-0 E-MAIL info@schrack.com, INTERNET www.schrack.at Kabel ca.. Strip of jacket

PATCHPANEL 24xRJ45 UTP, CAT 6, HSERU246GV / 01-2007 Änderungen, etwaige Satz- und Druckfehler vorbehalten... W ADERN AUFLEGEN /

In order to open the connector clip, horizontally insert a screwdriver into the top horizontal slot and rotate it for loosing one side. Then insert this screwdriver by the same way

Seybelgasse 13, A - 1230 Wien, TELEFON +43 1/866 85-0 E-MAIL info@schrack.com, INTERNET www.schrack.at.. Installation

/ Instead of wrapping the drain wire around the foil shield, the drain wire may be inserted into the ninth slot (the slot with no color code) on the IDC connecting block as

Fasten the cable to the strain relief tabs with cable ties and trim off the excess cable tie.. Mount the patch panel in the desired position inside the

SCHRACK TECHNIK GMBH Seybelgasse 13, A-1235 Wien TELEFON +43(0)1/866 85 - 0. E-MAIL info@schrack.com,

Prawidłowa nazwa przewozowa (ADR) : Nie dotyczy Prawidłowa nazwa przewozowa (IMDG) : Nie dotyczy Prawidłowa nazwa przewozowa (IATA) : Nie dotyczy Prawidłowa nazwa przewozowa (ADN) :